máquinas injetoras usadas para venda (1,128)

HUSKY GL300 System 48mm +3025 +Óleo Comestível 32mm + 2921 moldes OPPORTUNITY HUSKY GL300 ANO 1998 MOLDES + 48mm de pescoço de água acabamento 32 cavidade completa molde (hot runner) com 2 conjuntos de núcleo (81gr~85gr~91gr.) + 30/25 acabamento de pescoço de água 48 cavidade completa molde (hot runner) com 1 conjunto de núcleo (16~18,2 gr) + Óleo comestível de 32 mm (encaixe no óleo comestível largo) do pescoço com meio molde com conjunto de núcleo (24~27gr.) + 29/21 óleo comestível 25 gr acabamento de pescoço alteração de reforma sobre kit. Auxiliares: Desumidificador de bolor de piovan, secador de resina com tremonha, e transportador T 400v 50hz Condição: Condição justa, ligada (pode ser inspecionada) Mais imagens a pedido USA Mobile: +1 305 831 8888 whatsapp +5491157143569 j.plaul@optimisense

This Kloeckner Desma PU D522/12-LDI was manufactured in 2017. Designed for PU injection and shoe production, featuring a 12-station setup with a clamping force of 70 kN. It includes a reaction injection molding unit, automatic mold slider, and motor capacity of 23.16 kW. Heating capacity stands at 45.50 kW. Contact us for more information about this machine.

Distance between the bars 420x420 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 750 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-17

Distance between the bars 420x420 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 750 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-20

Distance between the bars 710x630 mm, hole centering ring fixed plate Diameter 160 mm, minimum installation height 250 mm, maximum open travel 1450 mm, core pull 2, documentation, Machine was dismantled in 2014, overhauled (Italy) and recommissioned, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-10

Auction-ID: A1-43992-54

closing pressure:6600 kNweight of the machine ca.:45,5 t

Distance between the bars 710x630 mm, hole centering ring fixed plate Diameter 160 mm, minimum installation height 250 mm, maximum open travel 1450 mm, core pull 2, documentation, Machine was dismantled in 2014, overhauled (Italy) and recommissioned, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-11

used with BMB machines, ø 420 mm, height 620 mm Auction-ID: A1-43992-263

Distance between the clamps 470x470 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 900 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Attention! Pick up by appointment Auction-ID: A1-43992-18

used on BMB machines, hopper height 770 mm, Auction-ID: A1-43992-264

1x type 420 M 1000-250/250, 1x type 420 M 1000-350 Auction-ID: A1-43992-58

Holmloos, hole centering ring fixed plate Diameter 160 mm, minimum installation height 350 mm, maximum opening (hydraulic) 950 mm, core pull 1, equipped with hydraulic screw drive, documentation available, Please note! pick up by appointment, Fanuc robots not included Auction-ID: A1-43992-21

Auction-ID: A1-43992-51

Auction-ID: A1-43992-56

Clamping Force: 160 Ton Maximum opening stroke: 450 mm Mould height: between 250 and 550 mm Distance between plates: 1000 mm Plate dimensions: 795x795 mm Distance between columns approx.: 520 x 520 mm Maximum weight supported: 1110 kg on the moving plate. Extraction stroke: 200 mm MORETTO Receiver-Hopper NOT included. With WEMO manipulator With SESOTEC metal detector Screw diameter: between 25 and 35 mm - not accurately detected Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate dimensions of the machine body: 5700×1600×3500 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-697

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800×1900×2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-699

Auction-ID: A1-43992-57

1x type 270 M 500-210, 1x type 270 M 350-90 Auction-ID: A1-43992-59

Distance between the holms 1120x1010 mm, hole centering ring fixed plate Diameter 250 mm, minimum installation height 450 mm, maximum open travel 1400 mm, maximum opening (hydraulic) 2600 mm, core pull 4, Machine was dismantled in 2014, overhauled (Italy) and recommissioned, equipped with hydraulic screw drive, 189 Kw, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-3

Distance between the holms 920x760 mm, hole centering ring fixed plate Diameter 160 mm, minimum installation height 250 mm, maximum open travel 1000 mm, maximum opening (hydraulic) 1900 mm, core pull 4, Machine was dismantled in 2017, overhauled (Italy) and recommissioned, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-4

Auction-ID: A1-43992-60

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm WEMO manipulator NOT included. MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800 × 1900 × 2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-700

Auction-ID: A1-43992-55

including Arburg Neuzen etc Auction-ID: A1-43992-245

Distance between the clamps 860x760 mm, hole centering ring fixed plate Diameter 160 mm, minimum installation height 900 mm, maximum open travel 1000 mm, maximum opening (hydraulic) 1900 mm, core pull 4, Machine was dismantled in 2014, overhauled (Italy) and recommissioned, equipped with hydraulic screw drive, 159 Kw, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-2

Auction-ID: A1-43992-50

steel; connection diameter approx. 90 mm; filling opening approximately 700 mm; equipped with sight glass; total height approx. 760 mm; on 2 pallets without pallets; Auction-ID: A1-43992-212

Auction-ID: A1-43992-52

Distance between the bars 710x630 mm, hole centering ring fixed plate Diameter 160 mm, minimum installation height 250 mm, maximum open travel 1450 mm, core pull 2, documentation, Machine was dismantled in 2014, overhauled (Italy) and recommissioned, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-12