outras máquinas para trabalhar madeira usadas para venda (1,402)

Jaw width: approx. 100 mm, clamping width: approx. 150 mm Auction-ID: A7-47533-106

Edge banding machine Type: Astra 60/8 RA Manufacturer: FAHD Year: 2022 Counter: 12000 m two trays, one for Eva and the other for PUR and also EVA. Front and rear spray Two cutting saws Radius cutters, flat cutters Beveling unit Diamond pre-cutters Polishing discs Speed 14m/min Machine in good condition, fully functional, under power Find more here - / Contact us at -

Auction-ID: A7-47533-141

Air volume flow: 980 - 1140 m3/h, max. vacuum: 2000 Pa, intake manifold: 125 mm, dust container: 45 litres Auction-ID: A7-47533-204

consisting of 3 chambers; inside dimensions 8000 x 8100 x 3800 mm; outside dimensions 28.000 x 9200 x 5900 mm; kiln maximum temperature 80°C; insulated steel panel construction; (3x) insulated steel panel sliding doors; hot water heating system; ventilation system; (3x) electrical cabinet with touchscreen display; installed power 19 kW; manual present Auction-ID: A1-46626-52

consisting of 3 chambers; inside dimensions 8000 x 8100 x 3800 mm; outside dimensions 28.000 x 9200 x 5900 mm; kiln maximum temperature 80°C; insulated steel panel construction; (3x) insulated steel panel sliding doors; hot water heating system; ventilation system; (3x) electrical cabinet with touchscreen display; installed power 19 kW; manual present Auction-ID: A1-46626-51

CNC machining center Type: Skipper V31 Manufacturer: Biesse Year: 2012 X: 2500 mm Y: 900 mm Z: 70 mm Drills: 5+5 vertical, 6+4 horizontal Grooving saw Milling spindle: 4.5!kW, ISO Extended table Machine in good condition, fully functional, under power Find more here - / Contact us at -

Horizontal panel saw with pressure beam Type: HPP 200/32/32 Manufacturer: Holzma Year: 2015 Avaílable: 10/2026 Cross section: 3200x3200 mm Optimization directly on the CADPLAN 4 saw - JUST IN TIME Large PICA II printer Two engines, main unit 13kw, pre-cut 1.1kw Package for cut-outs Grooving package Additional two-finger collet for the 175mm position 3x set of disc and pre-cut Machine in good condition, fully functional, under power Find more here - / Contact us at -

Edge banding machine Type: Akron 1130 J Manufacturer: Biesse Year: 2020 Panel height: 8-50 mm Minimum part length: 150 mm Minimum part width: 85 mm Feed speed: 9 m/min Front separation spray Pre-milling unit Infrared lamp EVA adhesive roller application Pressure rollers Capping unit Milling unit equipped with nesting copier Rounding unit Radius filter Surface filter Cleaning fluid spray Polishing discs LCD display for switching on the units, including clear statistics on peeled meters and number of parts Counter: 63000 m Machine in good condition, fully functional, under power Find more here - / Contact us at -

Edge banding machine Type: KAM6ALL+ Manufacturer: Holzmann Year: 2023 Min. workpiece length: 100 mm Min. workpiece width: 100 mm Min. workpiece thickness: 8 mm Max. workpiece thickness: 42 mm Edge thickness: 0.4 - 3.0 mm Air pressure: 6-8 bar Machine weight: 1260 kg In very good condition, fully functional, under power Find more here - / Contact us at -

Panel saw Tyoe: FKS400V32PRO Manufacturer: Holzmann Year: 2023 Table height: 890 mm Formatting table: 3200x435 mm Boom: 1200x550 mm Suction: 1x Ø 100 / 1x Ø 80 mm Max. width of cut with longitudinal ruler 1300 mm Main saw blade (/hole): 250-400 (/30) RPM of saw blade: (I):3000 (I):4000 (III):5000 rpm Diameter of pre-cutting disc (/hole) Ø120 x 20 x 3.2-4.2/2.2 mm Power of the pre-cut motor: 750 W Pre-cut speed: 8000 rpm Turning the saw blade: 0-45° Dimensions:4760 x 5010 x 1700 mm Machine weight: 1044 kg In very good condition, fully functional, under power Find more here - / Contact us at -

Panel saw Type: K 700 S Manufacturer: Felder Year: 2018 Machine in good condition, fully functional, under power Find more here - / Contact us at -

tube diameter: 300 mmlength: 1.170 mmwidth: 380 mmheight: 820 mmAs good as new block separator or block trap for sorting out wooden blocks in extraction systems.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 55- 170 mmwork piece width: max. 28 mmworkpiece height: max. 27,5 mmmilling motor: 2 cut-off saw: 1 Special machine APK automatic sawing and milling machine for cutting wooden blocks to length and then milling them. Special design for the production of cutlery tray inserts (see pictures) or similar workpieces.Work sequence:1. feeding the material from the magazine2. cutting (sawing) to the desired length3. milling of the cut workpieces4. ejection of the finished part.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge banding machine Type: G 200 Manufacturer: Felder Year: 2007 Edge thickness: 0.4 – 2 mm Part thickness: 10 – 45 mm Min. part length: 250 mm Min. part width: 90 mm Feed: 5 – 5.5 m/min Moulding speed: 9000 rpm Moulding diameter: 70 mm Glue temperature: 20 – 210 °C Glue container capacity: 1.2 kg Weight: 310 kg Including suction Copy wheels from a newer model Currently after service Machine in good condition, fully functional, under power Find more here - / Contact us at -

Edge banding machine Type: G 360 Manufacturer: Felder Year: 2022 Edge thickness: 0.4 – 5 mm Part thickness: 10 – 45 mm Min. part length: 210 mm Min. part width: 70 mm Feed speed: 8 m/min Total power: 5,5 kW Weight: 450 kg Machine length: 2300 mm Equipment: pre-milling unit trimming unit lamp for preheating edged material glue melting tank removable glue tray radius cidliny flat cidliny Machine in very good condition, fully functional, under power Find more here - / Contact us at -

Edge banding machine Type: O KDF 220 C Manufacturer: Brandt Year: 2016 Pre-milling unit Adhesive unit Miter saw Milling unit Corner rounding unit Cleaning units Pre-mills recently replaced, serviced + spare tub for overhaul Machine in good condition, fully functional, under power Find more here - / Contact us at -

- Manufacturer: Homag - Type: CNC machining center incl. vacuum tube lifter JUMBO ERGO 85 - Model: Profi BOF311/40/21/R - Year of manufacture : 2012 - Dimensions: 9,830 x 7,420 x 3,000 mm (length x width x height) - Condition: very good, regular annual maintenance by a licensed Homag partner - Special feature: Inkjet printer instead of a label printer - Milling unit 7.5/12kW - Maximum speed n: 24,000 min⁻¹ - Drill head: individually controllable, quick-change chuck - 9 vertical spindles - 2x 2 horizontal spindles - Tool magazine - 12-position changer - Securing the work area with a safety mat divided into three zones - CE certification (DE, EN & RO) available - Language package: German, English, Romanian - Software: - WoodWOP 8 - New machine computer in July 2022 including upgrade of machine operating system Find more here - / Contact us at -

service station for processing PUR glue Type: EDGETEQ XES 200 Manufacturer: Homag Year: 2021 2 vacuum containers for application units, Electronic temperature control Mobile station on wheels Only requires electricity and compressed air, Dimensions: 980 × 600 mm Weight: 230 kg Helps: extend the life of the adhesive prevent hardening speed up the restart of production after a night or weekend Preheating: Integrated heating enables a quick start of production after changing or storing the container. Cleaning: Automated process of emptying and cleaning application units. In good condition, fully functional Find more here - / Contact us at -

Edge banding machine Type: Tempora 45.03L Manufacturer: Format-4 Year: 2019 Smartuch control unit: 10.4" touch screen for easy control of the units. Pre-milling unit: Two counter-rotating diamond cutters for a clean cut without breaking out. Glue tray: Quick maintenance and the ability to work with EVA and PUR adhesives. Complete processing: Cutting, multifunctional milling, corner grinder for corner processing, radius sanders and surface sanders. Cleaning spray (at the rear): The machine is equipped with nozzles for applying cleaning agent in front of the polishing brushes, which guarantees a clean surface without glue residues. Technical parameters: Edge thickness: 0.4 - 3 mm Workpiece thickness: 8 - 45 mm Feed speed: 10 m/min Installation length: approx. 4,230 mm Machine in good condition, fully functional, under power Find more here - / Contact us at -

Equipment Included - Wurster and Dietz OPTIMAT swing-stroke full gate saw, built circa 1970 - Splitting wedge - Cross conveyor - Roller conveyor - Sharpening machine - Setter - Wurster and Dietz Edge Saw FR 7, built circa 1965 Find more here - / Contact us at -

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular