prensas usadas para venda (1,705)

Prensa de alisamento horizontal hidráulico, utilizada Prensa horizontal multiusos, utilizada tipo: HHP160 max. força de pressão/ arqueação máxima: 160 t Ano de construção/ano de fazer: 1965 Fabricante/ make: Pellissier Hanau max. força de pressão/ arqueação máxima: 160 t Traçado de pistão/ traçado de êmbolo: 400 mm Diâmetro do pistão/ diam. de pistão: 300/ 185 mm Extensão / profundidade da garganta: 225 mm Tamanho da mesa/ tamanho da mesa: 1150 x 350 mm Velocidade de pressão/ velocidade de prensagem: 16 ... 6 mm / seg Adiantamento/ adiantamento: 75 mm / seg Retorno/ retorno rápido: 208 mm / seg Largura de instalação entre Kobendruckstück e atravessar pedaços de pressão/ distância entre o êmbolo com carneiro e localizadores: 320 mm Distância das p ...

Prensa de eixo da mão, usada Balancier, usado Tipo: PSHZ 25/I Força de pressão / pressão nominal: 25 t Traçado/ traçado: 250 mm Tamanho da mesa/ tamanho da mesa: 400x 500 mm Stössel/ carneiro: 200 x 500 mm Abertura da mesa / buraco na mesa: 140 mm Peso: 0.9t

Centro de diapositivos de extensão / distância para quadro: 320 mm Espessura da folha / espessura da folha: 3,2 mm Superfície de corte / capacidade de corte: 1600 mmx2 Pilão de mesa de distância/ deslize da mesa de distância: 417 mm Ajuste /ajuste do curso: 16...125 mm Número de traçado/ número de traçados: 45 /min Pilão ajustável/ajuste do slide: 80 mm Tamanho da mesa / superfície da cama: 800 x 630 mm Tamanho do para-choques / superfície do carneiro: 500 x 400 mm Inclinação do stand / inclinação de coulmn: 25 Potência da potência motora principal: 4 kW Peso: 2.5 Especificação: Prensa de perfuração de quadro C, utilizada

Número de Stock: 3855 IMPRENSA EXCÊNTRICA Fabricante: PMB, Tipo: EPF 64 Máquina no.: 744103, Ano de fabricação: 1974 Especificações: Gr. pressionando pressão 64 a Tamanho da mesa: 520 x 700 mm Comprimento do curso 8-96 mm Projeção 265 mm Potência total 5,5 kW Controle Fabr. Embreagem pneumática. Comprimento: 2000 mm, Altura: 2500 mm, Largura: 1200 mm, Peso: 4000 kg

Número de Stock: 3785 IMPRENSA EXCÊNTRICA Fabricante: PMB, Tipo: EPFT 100 Máquina no.: 004301, Ano de fabricação: 2002 Especificações: Tamanho da mesa: 780 x 590 mm Comprimento do curso 8-120 mm Número de golpes por minuto 55 Projeção 300 mm Altura de funcionamento 395 mm Potência total 7,5 kW Embreagem pneumática. Relação de transmissão. Hidr. Proteção contra uso excessivo. Peso: 5500 kg

Número de stock: 3768 CNC PRENSA FREIO Fabricante: DONEWELL, Tipo: 100 x 3000 Máquina N.º: 588 12 2348, Ano de construção: 1988 Especificações: Tamanho comprimento de flexão 3100 mm Tamanho Capacidade de impressão 100 toneladas Comprimento do curso 215 mm Passagem do suporte 2600 mm Projeção 265 mm Velocidade de flexão 420 mm/min Hidráulica. Controlo CNC Cybelec EURO III Fabr. Controlado em Y1-Y2-X Achen Backgauge controlado por programa. X - 500 milímetros Acessórios: Ferramenta superior dividida por segmento 3100 mm Ferramenta multi-fundo 3100 mm Manuais de operação Comprimento: 1300 mm, Altura: 2450 mm, Largura: 3100 mm, Peso: 7000 kg

Número de stock: 3754 PRENSA HIDRÁULICA Fabricante: STENHOJ, Tipo: 25T TE Máquina NO.: 54718, Ano de construção: 1988 Especificações: Tamanho da mesa 620 x 380 mm Comprimento do curso 300 mm força premente 25 toneladas Peso: 1600 kg

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 130 toPRESS TABLE  table surface (left-right): 1200 mm  table surface (front-back): 700 mm  thickness of bolster plate: 80 mmSLIDE  table surface (left-right): 750 mm  table surface (front-back): 550 mm  stroke rate (max.): 60 /minSLIDE (MECHAN. PRESS)  slide adjustment: 100 mm  stroke min.: 19 mm  stroke max.: 165 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 525 mmELECTRICAL SPECIFICATIONS  total power consumption: 11 kW  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1685 mm  space requirements -front/back-: 1910 mm  total height: 3340 mm  total weight approx.: 11000 kg

PRESS DESIGN  drive system: eccentric / crank   table cushion: yes PRESS FORCES  total force (nominal): 100 to  nominal work capacity: 1000 kNmPRESS TABLE  table surface (left-right): 1100 mm  table surface (front-back): 660 mm  thickness of bolster plate: 100 mmSLIDE  table surface (left-right): 640 mm  table surface (front-back): 420 mm  spigot hole diameter: 50 mm  stroke: 130 mm  stroke rate (max.): 60 /minSLIDE (MECHAN. PRESS)  slide adjustment: 110 mm  stroke min.: 20 mm  stroke max.: 130 mmDIE CUSHION (TABLE CUSHION)  number of cushions: 1 TOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 450 mm  distance table - slide max.: 580 mmELECTRICAL SPECIFICATIONS  total power consumption: 7.5 kW  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1610 mm  space requiremen ...

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 40 toPRESS TABLE  table surface (left-right): 650 mm  table surface (front-back): 380 mm  thickness of bolster plate: 60 mm  opening in bed (diameter): 120 mmSLIDE  table surface (left-right): 350 mm  table surface (front-back): 250 mm  spigot hole diameter: 40 mm  stroke: 78 mm  stroke rate (max.): 145 /minSLIDE (MECHAN. PRESS)  slide adjustment: 60 mm  stroke min.: 8 mm  stroke max.: 78 mm  main drive power: 3 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 297 mmELECTRICAL SPECIFICATIONS  total power consumption: 3.05 kW  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1300 mm  space requirements -front/back-: 1100 mm  total height: 2150 mm  total weight approx.: 2200 kgATTACHMENTS ...

Mechanical stamping press manufactured in 2002. This PRESSIX 160 CNR 6 features a capacity of 160 tons and an adjustable stroke ranging from 20 to 200 mm. It operates at a speed of 20 to 70 strokes per minute and includes a motorized slide adjustment of 100 mm. The table dimensions are 1100 x 700 mm, providing ample workspace. If you are looking to get high-quality stamping capabilities, consider the PRESSIX 160 CNR 6 machine we have for sale. Contact us for further details.

- Marca: AMADEO FARELL - Para fabricar balas - Boca de carga: 1200 x 500 - Tamanho do túnel: 800 x 600 - Motor: 15cv (11kw) - Com quadro elétrico

PRESS DESIGN  drive system: eccentric / crank   table cushion: yes PRESS FORCES  total force (nominal): 63 to  nominal work capacity: 630 kNmPRESS TABLE  table surface (left-right): 900 mm  table surface (front-back): 560 mm  opening in bed (diameter): 250 mmSLIDE  table surface (left-right): 450 mm  table surface (front-back): 310 mm  clamping surface diameter: 50 mm  stroke: 100 mm  stroke rate (max.): 100 /minSLIDE (MECHAN. PRESS)  slide adjustment: 80 mm  stroke min.: 17.5 mm  stroke max.: 100 mmDIE CUSHION (TABLE CUSHION)  number of cushions: 1 TOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 340 mm  distance table - slide max.: 440 mmELECTRICAL SPECIFICATIONS  total power consumption: 5.5 kW  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1310 mm  space require ...

SLIDE  total force (nominal): 250 to  stroke: 61 mm  stroke rate (max.): 60 /min  stroke rate (min.): 15 /minCOUNTER RAM  nominal force: 75 toV-RING  nominal force: 75 toTOOL DIMENSIONS  lower table (left-right): 540 mm  lower table (front-back): 540 mm  upper table (left-right): 540 mm  upper table (front-back): 540 mmSTRIP-FEEDER  sheet width max.: 250 mm  sheet thickness max.: 10 mm  sheet length min: 1500 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 3150 mm  space requirements -front/back-: 2120 mm  total height: 3000 mm  total weight approx.: 14000 kgLocated in Barcelona - SpainInstallation space of the toolsFront passage between the columns:Movable: 560 mmFixed: 560 mmSide passage between the columns:Movable: 270 mmFixed: 270 mmTool height:Movable: 160 - 305 mmFixed: 175 - 320 mmVertical adjustability of the upper clamping plate:Movable ...

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 80 toPRESS TABLE  table surface (left-right): 860 mm  table surface (front-back): 620 mm  thickness of bolster plate: 70 mm  opening in bed (diameter): 165 mmSLIDE  table surface (left-right): 570 mm  table surface (front-back): 390 mm  spigot hole diameter: 50 mm  stroke: 120 mm  stroke rate (max.): 67 /minSLIDE (MECHAN. PRESS)  slide adjustment: 90 mm  stroke min.: 9 mm  stroke max.: 120 mm  main drive power: 5.5 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 360 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 1420 mm  space requirements -front/back-: 1700 mm  total height: 2990 mm  total weight approx.: 5600 kg

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 15 toPRESS TABLE  table surface (left-right): 360 mm  table surface (front-back): 260 mmSLIDE  stroke rate (max.): 165 /minSLIDE (MECHAN. PRESS)  slide adjustment: 40 mm  stroke min.: 7 mm  stroke max.: 60 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 226 mmELECTRICAL SPECIFICATIONS  total power consumption: 1.15 kW  mains voltage: 400 VDIMENSIONS / WEIGHTS  total weight approx.: 630 kgATTACHMENTS (PRESSES)  safety guard / safety door: yes   2-hand engagement: yes   foot engagement: yes   European CE standards: yes

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 80 toPRESS TABLE  table surface (left-right): 850 mm  table surface (front-back): 550 mmSLIDE  table surface (left-right): 560 mm  table surface (front-back): 376 mm  spigot hole diameter: 50 mm  stroke: 110 mm  stroke rate (max.): 60 /minSLIDE (MECHAN. PRESS)  slide adjustment: 80 mm  stroke min.: 0 mm  stroke max.: 110 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 360 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 855 mm  space requirements -front/back-: 1635 mm  total height: 2640 mm  total weight approx.: 5400 kgATTACHMENTS (PRESSES)  2-hand engagement: yes   foot engagement: optional   European CE standards: yes

High: 2.050 mm, Long: 750 mm, Force: 10 tons, Width: 600 mm, Weight: 800 Kg., Neckline: 150 mm, Stem travel: 200 mm, Rate of climb: 10 cm / sec, Piston rod ø of: 65 mm, Surface of the table: 300 x 300 mm., Specification: Hydraulics

Two T-slot tables, High: 2.500mm, Long: 1.700mm, Pump: 18L / mm, Force: 5 TN, Width: 1.000mm, Voltage: 220/380 V, Neckline: 160 mm, Stem travel: 200 mm, Total power: 4 CV, Piston rod ø of: 70 mm, Surface of the table: 450 x 300 mm, Maximum working pressure: 70 kg / cm2, Specification: Hydraulics

T-slot table, High: 2.500 mm, Long: 1.700 mm, Pump: 18 L / mm, Force: 5 TN, Width: 1.000 mm, Voltage: 220/380 V, Neckline: 160 mm, Stem travel: 200 mm, Total power: 4 CV, Piston rod ø of: 70 mm, Surface of the table: 450 x 300 mm, Step between uprights: 200 mm, Maximum working pressure: 70 kg / cm2, Specification: Hydraulics

Capacidade: 125 toneladas, Traçados por minuto: 85-500 / min, Slide: 870 x 550 mm, Largura da placa: 260 mm, Ano de fabrico: 1980

Key data: 50 t, 1600 mm, 200 mm

Freio de prensa CNC COLLY 502/A Comando numérico: CYBELEC tipo DNC 32 P-CM Capacidade: Comprimento máximo 2000 mm x 50 T Profundidade da garganta: 200 mm Distância entre verticais: 1600 mm Medidor de engrenagem traseira 1 machado Cilindro defeituoso Junta de cilindro direita para mudar Funcional da máquina (apenas junta de cilindro direita para trocar) Tensão: 380 V Comprimento: 2500 mm Profundidade: 2100 mm Altura total: 2400 mm Peso: aprox. 4 T

Hydraulic press manufactured in 2023. This GIZELIS G-FLEX 3140 features a pressing force of 140 tons and a working length of 3,100 mm. It includes a maximum bending thickness of 6 mm and a throat depth of 400 mm. If you are looking to get high-quality bending capabilities, consider the GIZELIS G-FLEX 3140 hydraulic press we have for sale. Contact us for further details.

This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), its CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information.

This BRUDERER BSTA 25 was manufactured in 2007. A high-speed precision stamping press, it features a vertical main ram for precise stamping and a horizontal feed mechanism for workpiece positioning. Ideal for sheet metal forming, stamping, pressing, and metal shaping, it operates at high speeds with computerized control. Compact design ensures space-saving installation. Consider the opportunity to buy this BRUDERER BSTA 25 metal press. Contact us for more information.

This SEYI SN1-110 was manufactured in 2002. It is a mechanical C-frame crank press with a 110 tons capacity and a stroke of 110 mm. The machine offers an adjustable speed range of 35–65 SPM, a maximum die height of 350 mm, and a main motor of approximately 11 kW (15 HP). Contact us for more information about this machine.

This HILALSAN ULTIMATE CAP-3220 hydraulic press was manufactured in 2021. It features a pressing force of 220 tons, a bending length of 3100 mm, and is equipped with a Delem DA-58 controller. With a stroke length of 265 mm and a throat depth of 410 mm, it offers robust performance for precise operations. Consider the opportunity to buy this HILALSAN ULTIMATE CAP-3220 hydraulic press. Contact us for more information about this machine.

This 4-axis HILALSAN Cap 2080 hydraulic press was manufactured in 2018. It features a pressing force of 80 tons, a bending width of 2600 mm, and motor power of 7.5 kW. The machine includes a stroke length of 205 mm and a throat depth of 310 mm. If you are looking to get high-quality bending capabilities, consider the HILALSAN Cap 2080 machine we have for sale. Contact us for more information about this machine.

This ERMAK CNC HAP 4100x400 was manufactured in 2006. It features a CYBELEC DNC 60 control system, a maximum working length of 4100 mm, and a press force of 400 t. The internal distance between columns is 3550 mm, and it includes a laser safety system. Consider the opportunity to buy this ERMAK CNC HAP 4100x400 hydraulic press. Contact us for more information about this machine.