prensas usadas para venda (1,703)

Prensa hidráulica JAM HYP-505H em muito bom estado para venda Fabricante: JAM Modelo n.º: HYP-505H Ano de Fabricação: 1990 Força de compressão: 50 kN (5 t) Curso de curso: 150 mm Altura de trabalho: 385 mm Tamanho da mesa: 400 × 340 mm Furo de perfuração: Ø 25 × 60 mm Velocidade da RAM: 260 mm/s Fpobmrjwin Emecu Idjb Velocidade da RAM: 39 mm/s Velocidade de retorno do êmbolo: 360 mm/s Intervalo de pressão: 7,7 MPa Barreiras luminosas de segurança Operação a duas mãos Tensão: trifásica, 200 V, 1,5 kW, 10 A Peso: 400 kg Óleo operacional: 25 litros Altura (mm): 1070 Largura (mm): 670 Comprimento (mm): 1060

Fabricante: AIDA Tipo: NC1-45 Pressão: 45t Ano de fabrico: 1987.08. Curso de curso: 80mm Distância sobre a mesa: (ajustável) 240-300mm Tabela: 810x360 Desentupidor: 410x340 Potência elétrica: 3x200V(), 5,5kW - padrão japonês Peso líquido: 3300 kg Tamanho: 980 x 1480 x 2275 mm

Fabricante: AIDA Tipo: NC2-160 Impulso: 160t Ano de construção: aproximadamente 1991 Comprimento do curso: 130 mm Distância acima da mesa: (ajustável) 235–335 mm Tabela: 2030 x 600 mm Desentupidor: 1500x600mm Potência elétrica: 3x200V(), 15kW - padrão japonês Peso líquido: 19000 kg Tamanho: 2140 x 2210 x 3175 mm Fobmeu D Ad Ejrcu Idepb Sistema automático de lubrificação. Dosagem Automática de Óleo de Corte – RAZIOL EST-02 Opcionalmente, com enrolador de disco e alisador.

Key data: 3 t, 150 mm

Venda em nova condição HYUNDAE CETTA HHP-3 prensa hidráulica inchmore piecesinch fabricante: HYUNDAE inchKoreainch tipo: HHP-3 Ano de fabrico: 2018 faixa de carga: 1-3 toneladas Curso [mm] 150 altura aberta: 250 mm -portão de luz de segurança -operação com duas mãos .-mesa de trabalho móvel Controlo de imprensa Hyundae Velocidade de fechamento da haste de pressão: 178mm/sec Velocidade de prensagem da haste: 54mm/sec Velocidade de abertura 79 mm/s Tamanho da tabela: 450x360mm Pressão máxima de trabalho: 60kg·f/㎠ Motor hidráulico 1,5 kW 3 fase/4P 200v Peso: 350kg altura da máquina polegadasem polegada de mesa: 1415mm comprimento da máquina: 950mm largura da máquina: ca 700mm mesa de trabalho com rodízios ou parafusos nivelados

Key data: 5 t, 150 mm

Prensa hidráulica Atsugi AP-5-KL Faixa de carga usada: 20-50 (kN) Curso (mm): 150 Velocidade mais baixa (velocidade de aproximação: 350 (mm/s) Velocidade mais baixa (sob pressão velocidade lenta: 36mm/s Velocidade de subida 250 (mm/s) A trabalhar Área Altura aberta: 250mm Profundidade aberta: 180mm Tamanho da tabela: 450x50mm Especificação do motor 3 Phase AC200V 4P 1.5KW Operação bimanual . Mesa de trabalho móvel Óleo Combustível / Quantidade Daphni Hidráulico 46/9L Peso Total (kg) 270 Tamanho do corpo Altura (mm) 986 Largura (mm) 485 Profundidade (mm) 920

AIDA NC2-250(1) 250t prensa excêntrica em excelente estado /ctA2/ Fabricante: AIDA Tipo: NC2-250(1) Força de impulso: 160t Ano de fabrico: aprox. 1991 Comprimento do curso: 170mm Distância acima da tabela: (ajustável) 280-400mm Tamanho da tabela: 2700x760mm Tamanho do urso: 2100x700mm Potência elétrica: 3x200V (), 30kW - padrão japonês Pgsc N D D Hou Dxb Tjxop Peso líquido: 35000kg Tamanho: 2760x2800x3980mm Sistema automático de lubrificação. Dosagem automática de óleo de corte - RAZIOL EST-02 Opcionalmente com enrolador de disco e alisador.

Dimensões da mesa (x-y/mm) 5000 x 2500 Dimensões do Ferrolho X-Y (mm) 5000 x 2500 Curso (mm) 1500 Luz no T.D.C.(mm) 2000 Altura de Aproximação (mm) 500 Acessórios amortecedores Almofada número 2 Área de almofada (x-y/mm) 4000 x 1800

The Dorst TPA 350 is a robust used powder compaction press, offering a maximum pressing force of 3500 kN. It is designed to handle demanding applications with efficiency, providing a maximum withdrawal force of 2500 kN and supporting force in pressing position up to 2000 kN. The die return force reaches a maximum of 80 kN. It features an upper punch stroke of 220 mm, with an adjusting travel of 200 mm, ensuring precision in operations. This press operates at a rate of 5-18 strokes per minute, catering to various production speeds. It accommodates a maximum filling height of 180 mm and allows a pressing travel and withdrawal travel both up to 90 mm. The top pressing travel is capped at 18 mm, with an upper punch pneumatic preload maximum of 60 mm, demonstrating versatility in its functioning. It operates with a compressed air supply consuming approximately 140 l/min, backed by a total con ...

The Dorst TPA 70S is a used powder compaction press, known for its precise and reliable performance. It delivers a maximum pressing force of 700 kN with a withdrawal force of 400 kN, making it suitable for diverse compaction needs. The machine features a pressing travel of up to 30 mm, with a maximum filling height of 70 mm and operates at speeds between 14 to 40 strokes per minute. This ensures efficient throughput, ideal for high-demand production environments. With an upper punch stroke of 120 mm and adjustable travel of 200 mm, the Dorst TPA 70S offers flexibility in application. It requires a compressed air supply with an intake of approximately 200 liters per minute, and operates on a total connected load of about 20 kW. To enhance functionality, the machine is constructed robustly, maintaining a workplace-related sound level of 78 dB(A), and features a press housing capacity of 19 ...

Hydraulic press manufactured in 2001. This AMADAs SCHIAVI HFB 220-40 features a robust 4000 x 220 Tons capacity and includes advanced safety features such as side and rear guards, and photocells that comply with regulations. With a use and maintenance manual provided, this refurbished machine is CE compliant. Consider the opportunity to buy this AMADAs SCHIAVI HFB 220-40 hydraulic press. Contact us for further details.

The Dorst TPA 20/3 is a reliable used powder compaction press known for its robust construction and precise operations. It offers a maximum pressing force of 200 kN and a withdrawal force of up to 100 kN. With a maximum filling height of 140 mm and pressing travel extending to 70 mm, it accommodates a range of powder compaction tasks efficiently. The press is capable of operating at speeds ranging from 5 to 22 strokes per minute, supporting a variety of production needs. It features an upper punch stroke of 200 mm, with an adjustable travel of 160 mm for flexibility across different applications. The machines air supply intake is approximately 160 liters per minute, and it has a connected load of about 15 kW. Constructed with dimensions of around 2000 mm in width, 1700 mm in depth, and 3250 mm in height, the Dorst TPA 20/3 weighs approximately 4,900 kg. It maintains a workplace sound lev ...

This MILLUTENSIL MIL163 hydraulic press was manufactured in 2003. Ideal for various pressing applications, it offers robust performance and reliability. Consider the opportunity to buy this MILLUTENSIL MIL163 hydraulic press. Contact us for more information.

The Dorst TPA 15/3 is a used mechanical powder compaction press designed for precision and efficiency in industrial applications. It provides a maximum pressing force of 150 kN and a withdrawal force of 100 kN, supporting a variety of compaction tasks. With an upper punch stroke of 100 mm and a range of 70 mm for adjusting the travel, this machine offers flexibility for different requirements. Operating at speeds of 7 to 32 strokes per minute, it ensures a reliable production throughput. This press allows for a maximum filling height of 70 mm and pressing travel up to 35 mm, suitable for a range of powder compaction needs. The machine is fitted with a compressed air system that has an intake of around 70 liters per minute and a total connected load of approximately 6 kW. It is compact yet robust, with dimensions of about 1400 mm in width, 1300 mm in depth, and 2650 mm in height, weighing ...

The Dorst TPA 6 is a used mechanical powder compaction press suitable for various industrial applications due to its robust performance and flexibility. It boasts a maximum pressing force of 60 kN and a withdrawal force of 30 kN, addressing a wide range of compaction needs. The machine supports a maximum filling height of 70 mm and a pressing travel of 30 mm, with an upper punch stroke of 95 mm and an adjustable travel of 50 mm. This ensures precise control over the compaction process. Operating at speeds between 7 to 32 strokes per minute, the Dorst TPA 6 consumes approximately 70 liters of compressed air per minute and has a total connected load of about 3.5 kW. It measures 2220 mm in width, 1060 mm in depth, and 2250 mm in height, weighing around 1,200 kg. With a gear oil capacity of 12 liters and a workplace-related sound level of 75 dB(A), it is designed to endure continuous use whi ...

The Dorst TPA 4 is a used mechanical powder compaction press well-regarded for its sturdy performance in various industrial settings. It features a maximum pressing force of 40 kN and a withdrawal force of 30 kN, making it versatile for different compaction tasks. With a maximum filling height of 70 mm and a pressing travel of 30 mm, this machine efficiently handles varied operational demands. The upper punch has a stroke of 95 mm with an adjustable travel of 50 mm, enabling precise control during processes. The press operates within a speed range of 7 to 32 strokes per minute, consuming around 70 liters of compressed air per minute and requiring a total connected load of approximately 3.5 kW. It is designed with dimensions of 2220 mm in width, 1060 mm in depth, and 2250 mm in height, while weighing about 1,200 kg. The gear oil capacity is 12 liters, ensuring durability and the ability t ...

Enfardadeira de cisalhamento TAURUS Ano 2006 Força de corte de 1700 toneladas Horas de trabalho cerca de 3.500 Força de compressão lateral 2x250 Força de compressão longitudinal 150 toneladas. Máquina em muito bom estado Sempre com manutenção e manutenção regular É vendido com seu gerador Perin de 805 kw com um tanque de 3000 litros

Key data: 1200 t, 1000 mm

Prensa hidráulica Gigant 1200 ton Ano construção: 1993 Tabela de dimensões: 3700 x 2700 mm Dimensão mesa inferior: 3700 x 2700 mm removível Luz máx: 1590 mm Mínimo leve: 610 mm Curso deslizante: 1000 mm Curso da almofada: 400 mm Folga lateral vertical: não

Key data: 800 t, 1350 mm

Prensa hidráulica Gigant 800 ton Ano construção: 1997 Tabela de dimensões: 3200 x 2200 mm Luz máx: 1800 mm Luz min: 450 mm Curso deslizante: 1350 mm Curso da almofada: 510 mm Folga lateral vertical: não

Prensa hidráulica Emanuel Prensa de 500 toneladas Ano construção: 1976 Tabela de dimensões: 2500 x 1900 mm Luz máx: 1490 mm Mínimo leve: 550 mm Curso deslizante: 940 mm Curso da almofada: 400 mm Folga lateral vertical: 900 mm

Key data: 300 t, 800 mm

Prensa hidráulica Emanuel 300 ton Ano construção: 1989 Tabela de dimensões: 1600 x 1300 mm Luz máx: 1130 mm Mínimo leve: 350 mm Curso deslizante: 800 mm Curso da almofada: 400 mm Folga lateral vertical: 640 mm

Prensa Knuckle Joint Kieserling 2000 ton yeer

The Dorst TPA 50/4 is a reliable, used mechanical powder compaction press designed for precision and efficiency. Offering a robust maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, it supports a variety of powder compaction tasks. With a filling height up to 180 mm and a pressing stroke of up to 90 mm, this machine is adaptable to diverse requirements. Equipped with an upper punch stroke of 120 mm and an adjustable travel of 220 mm, the Dorst TPA 50/4 provides flexibility for different applications. It operates at a speed of 7 to 32 strokes per minute, ensuring efficient production. The press requires a compressed air supply, consuming approximately 200 liters per minute, with a total connected load of around 18 kW. Constructed with durability in mind, the press measures approximately 2000 mm in width, 1700 mm in depth, and 3250 mm in height, and weighs around 5, ...

The Dorst TPA 50/2 is a used mechanical powder compaction press engineered for precision and efficiency, making it suitable for demanding industry applications. With a maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, this machine is robust and reliable. This model press allows you a maximum filling height of 180 mm and a pressing travel of up to 90 mm. Designed for versatility, it features an upper punch stroke of 120 mm and an adjustable travel of 220 mm, operating at speeds ranging from 7 to 32 strokes per minute. It requires a compressed air supply with an intake of approximately 200 liters per minute and has a total connected load of around 18 kW. The construction is sturdy and occupies a footprint with dimensions of approximately 2000 mm in width, 1700 mm in depth, and 3250 mm in height, weighing approximately 5,500 kg. The press operates at a workplace-rel ...

The Dorst TPA 5 is a refurbished mechanical powder compaction press, designed for precision and efficiency in industrial applications. It offers powerful performance with a maximum pressing force of 50 kN and a withdrawal force of up to 40 kN. This makes it suitable for a variety of powder compaction tasks, with a filling height of 50 mm and pressing travel capability of 25 mm. This machine provides flexibility with an upper punch stroke of 85 mm and an adjustable travel span of 70 mm, operating at 6 to 30 strokes per minute. It consumes around 50 liters of compressed air per minute and has a total electrical load of approximately 4.00 kW. With durable construction, the Dorst TPA 5 maintains a quiet operation at a sound level of 70 dB(A). The presss compact dimensions, approximately 1200 mm in both width and depth and a height of 2150 mm, with a weight of about 1,200 kg, make it a manage ...

The Dorst DK 250 is a robust used powder compaction press engineered by DORST, offering a substantial pressing force of up to 2500 kN. It supports operations with a maximum withdrawal force of 150 kN and a supporting force in the pressing position reaching 120 kN. Designed for precision, this model includes a 220 mm upper punch stroke with an adjustable travel of 120 mm. The press accommodates a pressing travel and withdrawal travel, each up to 50 mm, making it versatile for various pressing tasks. Operational performance ranges from 6 to 25 strokes per minute, and it provides a filling height of up to 100 mm. The Dorst DK 250 is efficient, consuming approximately 500 liters of air per minute and demanding a connected load of around 60.0 kW. Its dimensions, at 2500 mm in width, 1900 mm in depth, and 4800 mm in height, alongside a weight of approximately 18,500 kg, underscore its solid co ...

Prensa hidráulica C-Frame de 60 toneladas CAVENAGHI & RIDOLFI Potência nominal: 60 tonelada Ano de fabrico: 1975

Prensa hidráulica C-Frame de 30 toneladas CAVENAGHI & RIDOLFI Dados técnicos Potência nominal: 30 tonelada Ano de fabrico: 1973

Prensa hidráulica C-Frame de 30 toneladas CAVENAGHI & RIDOLFI Potência nominal: 30 tonelada Ano de fabrico: 1982

Pressing Force max.: 2000 Kn, Withdrawal force max.: 1500 Kn, Supporting force in pressing position max.: 1200 Kn, Die return force max.: 50 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 90 mm, Withdrawal travel max.: 90 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 60 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 26,0 Kw, Width aprox.: 2350 mm, Depth aprox.: 3500 mm, Height aprox.: 5900 mm, Weight of the press aprox.: 19.900 Kg, Press housing: 260 l (gear oil), Workplace-related sound: 78 dB (A)

Pressing Force max.: 2000 Kn, Withdrawal force max.: 1500 Kn, Supporting force in pressing position max.: 1200 Kn, Die return force max.: 50 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 90 mm, Withdrawal travel max.: 90 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 60 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 26,0 Kw, Width aprox.: 2350 mm, Depth aprox.: 3500 mm, Height aprox.: 5900 mm, Weight of the press aprox.: 19.900 Kg, Press housing: 260 l (gear oil), Workplace-related sound: 78 dB (A)