retificadoras usadas para venda (2,495)

width of the strips: 150 mmband length: 2000 mmband speed: 14.5 + 29.0 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 90.0 kgrange L-W-H: 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEELThe free-standing belt sander PÁSOVEC 150 is a 2-speed machine forefficient and at the same time economical sanding of surfaces, edges andRounding of parts made of carbon and stainless steel, aluminum and other non-ferrous metals such as wood and plastic. The machine has a totaltwo workstations for contact and face grinding. The height of the grinding armcan be adjusted to the operators body proportions. The machinehas an integrated preparation for the suction connection ex works. TheChanging the sanding belt is just one thing thanks ...

width of the strips: 150 mmband length: 2000 mmband speed: 29.0 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 4.0 kW 100% EDweight of the machine ca.: 84.0 kgrange L-W-H: 1080 x 520 x 1000 mmDescription :- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the sanding beltScope of delivery :- Sanding belt K 80- Hinged protective screen- Sanding and support table-  ...

width of the strips: 75.0 mmband length: 2000 mmband speed: 343.0 mm/sekgrinding width: 530 Plantisch mmtable height: 475 - 1240 mmtotal power requirement: 3.0 kWweight of the machine ca.: 100 kgrange L-W-H: 500 x 1010 x 1000 mmDescription:The belt sander models TAS 75 and 150 are powerfulQuality machines, built according to the strictest environmental andSafety regulations. The belt sanders are standardwith motor brake, adjustable working height, eye protection,Angle stop and motor protection switch with zero voltage releasebuilt. The low-noise machine with CE mark is suitableideal for grinding all metals.Furnishing:- engine brake- adjustable working height- Plexiglass privacy screen- Angle stop- Motor protection switch with zero voltage release- self-adjusting belt tension- Powerful engine 3.6 kW- suction nozzle including: integrated suction The data for this ad was created with ModulM ...

width of the strips: 45.0 mmband length: 850 mmband speed: 8.0 m/sek.voltage: 230 Vtotal power requirement: 0.18 kW MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wheel diameter: 250 mmgrinding wheel size: 250 x 25 x 20 mmturning speeds: 2850 U/minvoltage: 400 Vtotal power requirement: 2.0 kWweight of the machine ca.: 23.0 kg.dimensions of the machine ca.: 600 x 290 x 300 mmFurnishing:- Heavy design and high quality equipment- ideal for professional use- Ideal for matting, polishing- up to mirror-smooth surfaces of various materials- with the help of optionally available polishing discs and polishing pastes- Lockable ON-OFF switch according to IP54 with undervoltage release- Including motor with copper winding for a long service life- Standard with rubber feet for vibration-free work- Very smooth running thanks to balanced rotor with quality ball bearings- Elegant machine body made from high quality die-cast- Suitable for polishing metal, plastic and non-ferrous materialsScope of delivery:- Soft polishing pad- Hard polishing pad- Operating instruc ...

grinding width: 32.0 mmmax. dia. of grinding wheel: 250 mmgrinding wheel size: 250 x 32 x 32 mmturning speeds: 2850 U/minGrain size: K 36 / K 80 engine output: 1.5 kWvoltage: 400 Vweight: 30.0 kgrange L-W-H: 510 x 320 x 360 mmscope of delivery : - Grinding disc K 36- Finishing wheel K 80- Spark protection on both sides- workpiece supportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75.0 mmband length: 2000 mmband speed: 14.5 + 29 m/sekgrinding width: 460 x 75 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 67.0 kgrange L-W-H: 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steelproperties- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the Sanding beltscope of delivery- Sanding belt  ...

width of the strips: 150 mmband length: 2000 mmband speed: 34,0 mm/sekgrinding width: 530 Plantisch mmtable height: 475 - 1240 mmtotal power requirement: 4.0 kWweight of the machine ca.: 115 kgFurnishing :- integrated suction- engine brake- adjustable working height- Plexiglass privacy screen- Angle stop- Motor protection switch with zero voltage release- self-adjusting belt tension- Powerful motor 4.0 kW- suction nozzle including: integrated suction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 920 mmband speed: 7.0 m/secloading area: 300 x 150 mmmotor: 0.44 KWmotor: 400 Voltrange L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 920 mmband speed: 7.0 m/secloading area: 300 x 150 mmmotor: 0.44 KWmotor: 220 Voltrange L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 200 mmband length: 1490 mmband speed: 8.0 m/secmotor: 400 Voltloading area: 500 x 280 mmtotal power requirement: 1.5 kWDimensions (HxWxD): 750 x 600 x 340 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 usado: Máquina de moagem cilíndrica interna • Fabricante: OVERBECK, Herborn • Modelo: 250 I-HA • N.º de fábrica: 261991 • Ano construção: 1971 • Diâmetro de fixação: máx. 140 mm • Comprimento do furo moído: aprox. 150 mm • Diâmetro do furo moído: aprox. 0,8-80 mm Acessórios: sem eixo de moagem interno sem motor de acionamento para fusos de moagem internos Polias de deflexão para acionamento do eixo disponíveis (A máquina foi instalada pelo proprietário anterior com um fuso pneumático operado) Dispositivo de moagem plano, pode ser girado à mão Tanque de refrigerante com bomba

Número da máquina: 20932 Tensão de funcionamento: 3 x 400 VCA Frequência: 50/60 Hz. Corrente nominal: 46A 63A Tensão de controle: 200-240 VAC Potência: 28 kW Controlo: Suporte para ferramentas: Cabeça de moagem: Fuso de moagem: O eixo pode ser girado pelo motor Potência de acionamento: 7,5 kW Velocidade: 0 – 9000 rpm Montagem da lente: Diâmetro do disco: Número máximo de fatias: Viagens: X: 380 mm Y: 280 mm Z: 280 mm Alimentação: Eixos X e Y: 20000 mm/min Eixo Z: 10000 mm/min Eixos giratórios: Designação: eixo C Ângulo de giro: 340 Alimentação: máx. 66/s Eixo: Eixo A: Rotação infinita Alimentação: máx. 167/s Sistema de arrefecimento e arrefecimento de óleo do fabricante ARO Incluindo vários acessórios de máquinas correspondentes, tais como suportes para ferramentas, linhas de arrefecimento e outros dispositivos de fixa ...

x-axis: 700 mmy-axis: 410 mmz-axis: 500 mmfeed range: 30000 mm/minA-Axis: 175 mmC-axis: 320 °workpiece dia.: 340-500 mmworkpiece length: 700-1000 mmworkpiece weight max.: kgmax. dia. of grinding wheel: mmspeed spindle max.: 8000 U/min.power capacity: 11,5 / 14,5 kWControl: Siemens 840 Dsl tool taper: HSK 50E table-size: 1200 x 500 mmtotal power requirement: - kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 3 x 2,6 x 3,55 m5 AXIS CNC TOOL AND CUTTER GRINDER- CNC Control Siemens 840Dsl- Milling Unit– Tooling- high-pressure coolant system- Tool ChangerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roda de copo Ø: 180 mm Velocidade da roda do copo: 2900 rpm eletrizante. Ligação: 380 V, 2900 rpm, 0,9 kW Dimensões da mesa de vibração: 200 x 350 mm Mesa oscilante basculante Mesa oscilante gira em +/- 20° Dimensões: 750 x 350 x 1270 mm

spindle turning speed range: 170 - 18000 U/minweight of the machine ca.: 7,5 tdimensions of the machine ca.: 5,00 x 4,00 x 2,20 m--> Control conversion (2014) to Siemens Sinumerik 840D Solutionline--> Technical data Grinding diameter: 20 - 300 mm--> Oscillation diameter: 350 (500) mm--> Workpiece length: 300 (1300) mm--> Recommended grinding depth up to: 300 mm--> Grinding table stroke Z-axis (total): 650 (950) mm--> Resolution: 0.001 mm--> Rapid traverse: 12 m/min-1--> Grinding stroke speed: 0 - 9.99 m/min-1--> Feed rate: 0 - 99.99 m/min-1--> Step feed value during reversal: 0 - 0.999 mm--> Grinding table stroke X-axis (total): 150 mm--> Resolution: 0.001 mm / Ø--> Rapid traverse: 5 m/min-1/R--> Grinding stroke speed: 0 - 5 m/min-1/R--> Feed rate: 0 - 99.99 m/min-1/R--> Step feed value during reversal: 0 - 0.999 mm / Ø--> Swivel capability of the workpiece headstock:--> B-axis: -32° ...

Oferta 73066 Especificações: - Dimensões aproximadas da correia de lixamento. 2000 x 150 milímetros - Abertura de moagem superficial aprox. 560 x 150 milímetros - Velocidade aproximada da correia de lixamento. 30 m/seg. - Lavadora de contato B 150 / D 200 mm - Polia de acionamento B 150 / D 200 mm - Acionamento 400 V / 3 kW - Altura de trabalho ajustável - mote separado. Extração de poeiras - Necessidade de espaço aprox. L 750 x A 1050 x P 1500 mm - Requisito de espaço para. L 750 x A 1250 x P 750 mm - Peso aprox. 180 quilogramas

Área de moagem: 600 x 400 mm Tabela magnética Tanque de refrigerante vários rebolos

grinding wheel diameter: 200 mmwheel width max: 32 mmgrinding wheel hole diameter: 51 mmgrinding wheel speeds: 2900 U/minengine output: 0,9 kWDouble wheel grinder mounted on standThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An old precision cylindrical grinding machine Carl Zeiss is available. Includes numerous accessories and tools. An on-site inspection is possible.

Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511,, Device for automatic chamfering of sawblades from Ø 145 mm,, Automatic threading of the grinding wheel,, Automatic fire extinguishing system,, Automatic central lubrication,, Coolant system 400 L with coolant tank with filter system,, Machine lamp,, Oil collecting tray,, 3 sawblade mandrels (loader)., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thickness: max. 8 mm, Grinding wheel diameter: 200x32mm, Connected load: 10kW (400V / 50Hz), mass: about 3200 kg, Dimensions: L x W x H = 1198 x 1750 x  ...

An industrial knife grinding machine MVM for sharpening woodworking parts is available. Knife length: 6000mm, control: Siemens PLC with remote control. Includes an extraction system, a magnetic table, and a chip filter. Documentation available. An on-site inspection is possible.

A CNC cut-off grinding machine Anthratec, previously used for cutting grids, is available. Cutting speed at 2000rpm: approx. 42m/s, speed range: 500–3500rpm, connected load: 30kW, control: Siemens S7-1200. Documentation available. An on-site inspection is possible.

Comprimento de moagem 600 mm Largura de moagem 320 mm Altura máxima da peça 500 mm Movimento longitudinal da mesa 750 mm Movimento transversal da mesa 340 m Diâmetro da roda de moagem 350 mm Largura da roda de moagem 40 mm Velocidades do eixo 1500 rpm Travessia vertical rápida 400 mm/min Potência 3,7 kw Entrega automática Disco magnético Configuração do líquido de arrefecimento Peso 2500 kg

A CNC surface grinding machine Jung, overhauled in 2003, is available. Grinding length: 500mm, grinding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm, speed: 4200rpm, weight: approx. 2500kg, operating hours: approx. 16602h. Documentation available. An on-site inspection is possible.

width of the strips: 150 mmband length: 2000 mmband speed: 30.0 m/sekgrinding width: 500 Plantisch mmsuction capacity: 630 m³/htotal power requirement: 3.75 kWweight of the machine ca.: 100 kgrange L-W-H: 1100 x 550 x 1035 mmFurnishing :- High quality construction- The drive roller is crowned- this automatically centers the sanding belt in the middle of the roll- Fully vulcanized contact roller for longest service life and smooth running- Tool-free and therefore faster, uncomplicated change of the sanding belt- Stepless height adjustment- for optimal adjustment of the belt sander to the user- Freely adjustable metal stop- for the optimal and safe guidance of workpieces Use of the large surface grinding area- Belt speed optimized in terms of design- thus burning the workpiece during processing can be largely excluded- Extraction equipped with robust and flexible extraction hoses- Motor ...

A complete vibratory finishing system Rösler, consisting of several components, is available. 1) Trough-type system Rösler R 550/4600 DA, connected load: 15kW, weight: approx. 6000kg. 2) Water treatment centrifuge Rösler Z 600 ASS-1-Turbo. 3) Conveyor belt Rösler R 360/4100 FB/S, belt length: 8220mm, width: 379mm, weight: approx. 400kg. 4) Conveyor belt Rösler R 360/2800 FB/T, belt length: 5650mm, width: 379mm, weight: 230kg. 5) Discharge belt Rösler R 600/2000 FB/T, belt length: 4050mm, width: 620mm, weight: approx. 310kg. Documentation available. An on-site inspection is possible.

grinding length: 7080 mmgrinding width: 500 mmworkpiece height: 330 mmControl: Siemens SIMATIC S7 OP17 Passage height: 330 mmgrinding spindle data: : grinding wheel diameter: 450 mmgrinding wheel width: 100 grinding spindle speed: 6 - 2.100 1/min: 30 kWFeeds: : Longitudinal travel (X-Axis): max. 30 m/minCross travel (Y-Axis): max. 3 m/mintotal power requirement: 30 kWweight of the machine ca.: 22 tdimensions of the machine ca.: 8,0 x 2,0 x 3,2 mEquipment and accessories• Basic machine GÖCKEL U9/500 PL, mechanically and electrically refurbished• Siemens S7 control system and OP17 operating screen• Stand-alone electrical cabinet • Integrated handwheel function on the operating screen• Belt filter system with tank capacity approx. 900 l• 1 grinding wheel flange with grinding spindle• 1 pc. Vertical dresser, mounted on machine bed• DocumentationThe da ...

An older precision cylindrical grinding machine Kellenberger including accessories is available. Centre width: 200mm, centre height: 125mm, max. workpiece weight: 3kg, max. workpiece diameter: 245mm, max. workpiece length: 130mm. An on-site inspection is possible.

A CNC jig grinding machine Hauser is available. Weight: approx. 3000kg, control: ADCOS CNC 400, control option: ASS. Includes a coolant system and various accessories. An on-site inspection is possible.