retificadoras usadas para venda (2,496)

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Grinding wheel width: 125 mm, Control type (cnc/manual): Manual, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, No. of regulating wheel speeds: infinite, Regulating wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1520 mm, Width: 1020 mm, Tall: 1260 mm, Weight: 1600 Kg

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

Distance between points: 1100 mm, Center height: 175 mm, Maximum diameter to be rectified: 270 mm, Maximum piece weight: 135 Kg, Working wheel dimensions (od x id x width): Ø508xØ304.8x80 mm, Main engine power: 7.5 Kw, numerical control: Fanuc 21 Oi-T

Distance between points: 1000 mm, Ø max to be rectified: 350 mm, Max travel Z axis: 1.180 mm, Max travel X axis: 350 mm, Height of points: 180 mm, Ø max to be rectified with the left wheel: 350 mm, Left grinding wheel dimensions (od x id x width): Ø450xØ203x80 mm, Working wheel dimensions (od x id x width): 508x203.2x80mm, Right grinding wheel dimensions (od x id x width): Ø300xØ127x40 mm, cnc brand: FANUC, cnc model: 18TC, Main engine power: 7.5 Kw, Maximum weight between points: 120 Kg, Total installed power: 15 KW, Standard peripheral speed: 45 m/s, Automatic grinding head rotation with Hirt 2.5º: +5º_-180º, B axis control system: Incremental encoder + 2.5º Hirt ring, B axis motor: 2.5 Nm at 3000 rpm, X axis speed: 10,000 mm/min, X axis resolution: 0.0005 mm, Z axis speed: 10,000 mm/min, Z axis resolution: 0.005 mm, Z axis table rotation: 0º_9º, Workpiece head cone: MORSE  ...

Distance between points: 1000 mm, Height of the points: 175 mm, Point height: 175 mm, Grinding length: 500 mm, grinding length: 500 mm, Max. diameter to be rectified: 300 mm, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80/100 mm, Ø max to be rectified: 300 mm, Inner cone: Morse 5, inner cone: Morse 5, Working wheel motor power: 7.5 Kw, Total power: 17 Kw, Longitudinal travel of the carriage (X axis): 267 mm, Transverse travel of the carriage (Z axis): 650 mm, CNC brand: FANUC, cnc brand: FANUC, CNC model: 16-T, cnc model: 16-T, Grinding wheel speed: 0-1670 rpm, Turning range: +/- 8.5º, Dimensions: 2600 mm x 2300 mm x 2100 mm, Weight approx.: 4200 Kg

Working wheel dimensions (od x id x width): Ø610x80xØ304.8 mm, cnc brand: FANUC, CNC brand: FANUC, CNC model: 21 Oi TB, Maximum length between points: 1060 mm, Max travel Z axis: 750 mm, Maximum length to be rectified: 600 mm, Height of points: 225 mm, Ø min/max to be rectified: 10 - 300 mm, Max. piece weight: 125 Kg, Max travel X axis: 325 mm, Grinding wheel speed: 45 m/s, Main engine power: 11 Kw, Workpiece head speed: from 30 to 1000 rpm, Workpiece holder head cone: MORSE 5, Power of workpiece head motor: 12 Nm, tailstock cone: MORSE 4, Travel of the tailstock quill: 70 mm, Hydraulic movement of the tailstock: 150 mm, Total power: 22 Kw, Long: 2300 mm, Tall: 1900 mm, Width: 2634 mm, Weight: 7750 Kg, Accessories: Cooling equipment with paper filter; MARPOSS meter, positioner and balancer;

Distance between centers: 1000 mm, Distance between points: 1000 mm, Height of points: 175 mm, Main engine power: 7.5 Kw, Working wheel dimensions (od x id x width): Ø500 x Ø203.2 x 80 mm, Ø max to be rectified: 350 mm, Max. diameter to be rectified: 350 mm, tailstock cone: MORSE 3, Workpiece head cone: MORSE 4, Workpiece holder head cone: MORSE 4, Max travel Z axis: 1150 mm, Max. X axis travel: 275 mm, Max travel X axis: 275 mm, Approximate dimensions (length x width x height): 5,200 x 2,300 x 2084, Approx. dimensions (length x width x height): 5,200 x 2,300 x 2084, Weight approx.: 7000 Kg

Grinding wheel dimensions (od x id x width): Ø 650 x Ø 304.8 x 500mm, Ø min/max to be rectified: 3/200mm, Regulating wheel width: 500 mm, No. of regulating wheel speeds: Infinitas, Min/max speed of regulating wheel (r.p.m.): 10 / 255 rpm, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203.2 x 500mm, Grinding wheel width: 500 mm, Maximum length to be rectified in plongeé: 500 mm, Grinding wheel head motor power: 75 Kw, Total power: 90 Kw, Voltage: 220/380V, Long: 2.300 mm, Width: 2.800 mm, Tall: 2.100 mm, Weight: 15.000 Kg

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Maximum length to be rectified in plongeé: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Hight: 1420 mm, Weight: 4200 Kg

Grinding wheel dimensions (od x id x width): 508 x 304.8 x 160mm, Ø min/max to be rectified: 1.5/75mm, Regulating wheel width: 160 mm, Regulating wheel dimensions (od x id x width): 304.8 x 190.5 x 160mm, Grinding wheel width: 160 mm, Maximum length to be rectified in plongeé: 160 mm, Grinding wheel head motor power: 11 Kw, Long: 2.015 mm, Width: 1.280 mm, Tall: 1.440 mm, Weight: 3.000 Kg

Height of points: 150 mm, Dot height: 150mm, Distance between points: 1000 mm, Grinding wheel dimensions (od x id x width): Ø400xØ127x50mm, Indoor head: 4 units, Internal grinding head: 4 units, Centre height: 150mm, Center Height: 150mm, Max. piece weight: 80Kg, Max. workpiece weight: 80Kg, X-axis travel (transverse): 350mm, X-axis speed: 10 meters per minute, Z-axis travel (longitudinal): 1000mm, Z-axis speed: 12 meters per minute, Z-axis resolution: 0.00004, B-axis swivel range: 210°, B-axis rotation range: 210 °, B-axis resolution: 0.0001°, Drive capacity: 10 HP, Grinding wheel diameter: 400mm, Max. width Grinding wheel width: 63mm, Max. Width Grinding Wheel Width: 63mm, Spindle speed range: 0-1000 RPM, Spindle swivel range: 0° - 90°, Head rotation range: 0° - 90°, Tailstock stroke: 30mm, Counterpoint race: 30mm, Equipped with: Fanuc 21i-TB CNC Control, Dimensions: 3350x ...

GENERAL CHARACTERISTICS, Max. grinding diameter 120 mm, Grinding wheel width 250 mm, Minimum Ø to be ground 1 mm, Ø drive grinding wheel 304 mm, Ø working wheel 508 mm, DIMENSIONS AND WEIGHT, Height 1,700 mm, Width 1,500 mm, Length 2,750 mm, Weight 4,000kg, ELECTRICAL CHARACTERISTICS, Grinding head motor power 15 Kw, Power motor power grinding head 1,8kw, Hydraulic motor power 1,1kw, Total power 20 kW, Voltage 220/380 V

Weight: 2000Kg approx., Dimensions (L x W x H): 2000x1800x1700 mm, Total power: 8kW

TECHNICAL INFORMATION:, Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm, Dimensions of the regulating grinding wheel (od x id x width): Ø304,8xØ152.4x204 mm, Main motor power: 20 Kw, Voltage: 380 V, Height: 1700 mm, Length: 2000 mm, Width: 1080 mm, Weight: 4230 Kg approx.

Retificadora hidráulica de superfície Kair TM800x400. Curso máximo da mesa: 800mm. Curso cruzado máximo: 400mm. Altura sobre a mó: 260mm. Potência do motor principal: 3hp. Velocidade: 2000rpm. Moinho: 250x40x76mm. Dimensões máximas do mandril magnético: 600x300mm. Peso: 1800kgs. Dimensões: 2500x1500x1900mm.

Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1,700 RPM, Regulating wheel width: 150 mm, No. of regulating wheel speeds: 4, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.500 mm, Tall: 1.535 mm, Weight: 2.200 kg

Grinding wheel dimensions (od x id x width): Ø 508 x 304.8 x 250, Regulating wheel dimensions (od x id x width): Ø 255 x 155 x 250

Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1,700 RPM, Regulating wheel width: 150 mm, No. of regulating wheel speeds: 4, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.500 mm, Tall: 1.535 mm, Weight: 2.200 kg

Grinding wheel dimensions: Ø300 x Ø50 x 76 mm, Height to be rectified: 500 mm, Surface to be rectified: 600 x 300 mm, Grinding head motor power: 5.5 HP, Weight approx.: 2.000 Kg

Máquina de moagem de superfície GER RS-12/50. Área de moagem: 1200x550mm. Centro de mesa à distância do fuso: 625mm. Velocidade da mesa: 2 a 25m/min. Viagem de mesa máxima: 1250mm. Peso máximo de trabalho: 1200Kgs. Viagem cruzada máxima: 500mm. Tamanho da roda de moagem: 400x80x127mm. Moedor manual de diamantes. Cabeça de orientação vertical. Alimentação automática vertical. Potência do eixo de moagem: 12,5cv. Peso: 4500Kgs.

Ger RHC1500 Rectifier Universal. Cabeça interior. Distância entre pontos: 1500mm. Diâmetro máximo da peça: 355mm. Altura do ponto: 180mm. Diâmetro do dente: 400mm. Potência: 7.5hp. Peso: 4500Kgs.

Máquina de moagem de superfície. Misquete de 550x250mm. Viagem à mesa: 700mm. Área da superfície de moagem: 600x350mm. Max, max. altura: 375mm. Viagem cruzada: 300mm. Roda: 350x127x50 / 300x127x100 Peso: 2900Kg.

Máquina de moagem de ferramentas Jungner US-2305 Tabela: 1020 x 114 mm, superfície de aperto: 625 x 114 mm Distância entre centros: 305 mm Diâmetro da peça de trabalho: 225 mm Viagens: -X: 350 mm -Y: 90 mm Motor de centrifugação: 0,55 kW Velocidade do fuso: 3400 / 5000 / 6700 rpm

Altura central: 300 mm Diâmetro de viragem: 600 mm Distância entre centros: 2100 mm Excentricidade: máx 140 mm Auto-centrado diâmetro do mandril: 200 mm Peso da peça de trabalho: máx 250 kg Diâmetro de moagem: 224 mm Velocidade de viragem da peça de trabalho: 18/40/63/90 rpm Centeter da roda de moagem: 915 mm Espessura da roda de moagem: 32-63 mm Motor de moagem: 7,5 cv Tamanho: 5000 x 2100 x 1700 mm Peso: 4900 kg Inclui 3 eixos de rodas e 4 rodas de moagem usadas

Diâmetro de trabalho: 40 - 250 mm Carga automática de peças de trabalho e remoção para diâmetros da bola: 40 - 105 mm Carregamento manual para diâmetros: 105 - 170 mm Ligação direta da bola: 170 - 250 mm Velocidade de rotação, sem passo: 10 - 300 rpm Gama de velocidade do fuso: -160 - 3150 rpm -80 - 1580 rpm -38 - 775 rpm -20 - 385 rpm Peso: 6,5 tn Ligação elétrica: 17 kW Ano de fabrico: 1991

Roda de rectificação de bushel com abrasivo CBN, para a fresadora DAREX modelo E-90. Novo, nunca usado.

Roda esférica com abrasivo DIAMOND, para a fresadora DAREX modelo E-90. Novo, nunca usado, com vestígios de armazenamento.