outras máquinas para trabalhar o metal usadas para venda (10,981)

Max. operating temperature: 450°C, number of fans: 1, fan power: 0.75kW, power loss: 8kW, voltage: 400V, phases: 3, frequency: 50Hz, power supply: 26/26/32A, connected load: 18kW, control panel: Program Controller C40. With full documentation. The oven is in good condition, has been inspected regularly, and was in operation until recently. An on-site inspection is possible.

Offered is a straightening machine with cold rolling unit. 2-fold wire coil payoff, installed are: GSG COMBI rolling stand year 1994, GSG KWG.3 rolling stand year 1991, roller driver GSG ERT year 2007, straightening and cutting unit Wafios RBK51M year 2000, wire drawing unit 1 pass, wire diameter 6.0mm-12.0mm, max. speed 120m/min, min. cutting length 1600mm, cutting rate up to 80cuts/min, inlet strength approx. 50daN/mm². Package dimensions for finished material up to max. 14000mm length, up to 1000 bars per bundle. Length of the system approx. 5000mm. The system is offered without safety fence. Viewing possible by arrangement.

Bending direction: clockwise, steel tube diameter: 50mm, steel tube thickness: 3mm, stainless steel tube diameter: 50mm, stainless steel tube thickness: 2mm, max. section modulus: 5cm³, bending angle: 180°+10°, max. tube length: 2000mm, max. radius range: 150mm, bending height: 1050mm, bending head length: 850mm, min. bend spacing: 400mm, nominal pressure: 250bar, operating pressure: 200bar. Machine dimensions X/Y/Z: approx. 3200mm/1400mm/1300mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

Travel X/Y/Z: 620mm/420mm/400mm, C-axis: 360°, workpiece clamping plate X/Y: 1000mm/600mm, working tank dimensions X/Y: 1070mm/670mm, max. liquid height: 400mm, max. table load: 1500kg, max. electrode weight: 50kg/250kg, pulse generator: EroForm 60A, filling volume: approx. 1200l, tool changer: disc changer, tool positions: 20. Machine dimensions X/Y/Z: approx. 2450mm/2550mm/2450mm, weight: approx. 4500kg, control: EXMF 10, generator hours: approx. 19300h. Documentation available. An on site inspection is possible.

Travel X/Y/Z: 450mm/350mm/400mm, travel U/V: approx. +/-70mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight without/with tank: 800kg/400kg, wire diameter range: 0.2mm-0.33mm, tank volume: approx. 750l. Machine dimensions X/Y/Z: approx. 2000mm/2300mm/2500mm, weight: approx. 4000kg, control: Agievision. Documentation available. An on site inspection is possible.

A Zionair sandblasting cabin is available. Cabin volume: 420l, internal dimensions X/Y/Z: 1200mm/600mm/580mm, max. workpiece weight: 40kg. Machine dimensions X/Y/Z: approx. 1300mm/950mm/1700mm, weight: approx. 125kg. An on site inspection is possible.

Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible.

Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control. Accessories: Cooling package HRS050 L/W, sieving station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder container, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, inspection possible by arrangement.

Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure, External PC with contour management and Exprog software, Cooling unit for dielectric fluid, Automatic fire extinguishing system, Automatic central lubrication, Extraction system,, Measuring probe, Machine lamp, Workpiece carrier SK 40, Measuring mandrel SK 40, cutter outer diameter: Max. 320 mm, Shank tool diameter: 10-320 mm, Outer diameter disc-shaped tools: Max. 320 mm, Cutting length: max. 480 mm, X-axis travel: 500 mm, Tool weight: max. 20 kg, Y axis travel: 300 mm, Travel path W-axis: 200 mm, Machine space requirements: 2535 x 2200 x 2280 mm, A-axis rotation range: 360°, E-axis swivel range: 180°, Weight approx.: 4800 kg, Connected load: 5,4 kW, colour: grey RAL 7035/7043

Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure, External PC with contour management and Exprog software, Cooling unit for dielectric fluid, Automatic fire extinguishing system, Automatic central lubrication, Extraction system,, Measuring probe, Machine lamp, Workpiece carrier SK 40, Measuring mandrel SK 40, cutter outer diameter: Max. 320 mm, Shank tool diameter: 10-320 mm, Outer diameter disc-shaped tools: Max. 320 mm, Cutting length: max. 480 mm, X-axis travel: 500 mm, Tool weight: max. 20 kg, Y axis travel: 300 mm, Travel path W-axis: 200 mm, Machine space requirements: 2535 x 2200 x 2280 mm, A-axis rotation range: 360°, E-axis swivel range: 180°, Weight approx.: 4800 kg, Connected load: 5,4 kW, colour: grey RAL 7035/7043

Disc EDM machine for the complete machining of rotationally symmetrical workpieces with cutting edges made of ultra-hard materials. Workpieces are mounted vertically. Accessories:, Total enclosure, External PC incl. CAD/CAM and ExLevel Pro software, Software package with additional functions for metalworking tools,, Wheelchanger for up to 6 eroding/grinding discs,, Adaptation to A-axis on HSK 63-A-E, Coolant system with pump & cooling unit, Automatic central lubrication, Automatic fire extinguishing system, Automatic shut-off flap, Glass scales on the X, Y & Z linear axes,, Mechanical mist separators N280,, 3 grinding wheel change elements, Test mandrel HSK63A., Also available with workpiece magazine as an option!, Workpiece outer diameter: max. 320 mm, Tool outer diameter: Max. 200 mm, workpiece length: max. 250 mm, Bore diameter: Max. 60 mm, Travel path X1: 520 mm, Travel path Y1: 970  ...

Disc EDM machine for the complete machining of rotationally symmetrical workpieces with cutting edges made of ultra-hard cutting materials. The workpieces are mounted vertically (suspended). Accessories: Total enclosure,, Software for woodworking tools, Software for P-system peeling cutters, Software for scoring saws/radius cutters, Software for 360° path programme, Software for 360° peeling cutters, Workpiece magazine N250 (pallet magazine for max. 28 workpieces),, Disc changer for up to 6 eroding/grinding discs,, Adaptation to A-axis on HSK 63- F,, Coolant system with pump & cooling unit, Automatic central lubrication, Automatic fire extinguishing system, Automatic shut-off flap, Gripper fingers for workpiece automation,, 4 workpiece holders for workpiece magazine,, 1 exchange element with flushing kit,, Mechanical mist separator N183,, Test mandrel HSK63F., Maximum workpiece outer d ...

Centro de Laser da Lasag AG TIPO: FLS 542 C Ano de fabricação: 2006 Existem 2 sistemas para cada um do centro laser (2x ótica, 2x fonte laser) Existem também os cabos de fibra ótica e os blocos transformadores para as fontes laser, bem como um sistema de controlo PC. A central foi desmontada e armazenada em pleno funcionamento no final de 2024.

Pressão final de compressão: 10 pe/bar Velocidade: 745 1/min Fluxo volumoso: 3455 dm³/min Potência do motor: 22 kW

Diâmetro do eletrodo 0,5 a 3mm Viaja 300x400x350mm Eixo X de curso 300mm Curso no eixo Y 400mm Eixo Z de percurso 350mm Eixo W de percurso 300mm Velocidade no eixo C 30-60mm/min Rotação rápida no eixo Z: 120mm/min Proporção de aspeto 300:1 Dimensões da mesa 320x440mm Corrente de funcionamento máxima 30A A carregar livremente. do armazém 95643 Tirschenreuth Envio possível, os custos de transporte são suportados pelo comprador

Controlo: FANUC Distância de deslocação: X = 500, Y = 350 Z = 300 mm Carga máxima da mesa: 350 kg Dimensões: 3500 x 2400 x 2400 mm Peso: 3.000 kg

Máquina de medição Zeiss, modelo Contura, ano de fabrico 2018, sonda de medição motorizada, mais informações e fotografias mediante pedido.

Geral: Viagem X/Y/Z 800/ 1.000/700 mm Carga máxima da mesa: 800 kg Precisão de medição 0,0005 mm Repetibilidade 0,002 mm Sistema de sondagem Renishaw PH 10M Plus

drum diameter: 382 mmdrum height: 250 mmfilling amount: 40 kgwall thickness of drum: 13 mmdrum revolutions: 2850 U/minCapacity: 800 l/hvoltage: 400 Vtotal power requirement: 5,0 kWweight of the machine ca.: 500 kgdimensions of the machine ca.: 1,90 x 0,70 x 1,65 mCentrifuge with water treatment- Factory No.: 22126799- Machine ON: 5.144,65 h- TimerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FOBA Vario RPD50 VS1109/048 - Windows XP Inglês / Alemão - 1.4GHz 512MB RAM - Fobagraf 441-01 - Câmera EMC / IMP - Novos LED's IMP - Radiador tipo P313 - 2013 – novos filtros - HF 40W - PK usado, ano de construção 2011, 1.3MB, 10.5 W sob a lente - Lente 420, unidade de deflexão Raylase SS 10 - Z - 170mm e eixo X 300mm - Gira-discos em modo pêndulo, - Partida via pedaleira, possível através de cortina de luz - Interno / FOBA PLC - Antepara = altura máxima do componente 150mm - Completamente limpo / com manutenção 19% IVA é mostrado, EXW, Comissionamento, instrução, treinamento possível mediante solicitação

An originally packaged Ecoclean spray-flood cleaning system with a vacuum-tight working chamber is available. Working chamber diameter 1: 650mm, working chamber diameter 2: 750mm, max. basket dimensions 1 X/Y/Z: 670mm/480mm/300mm, max. basket dimensions 2 X/Y/Z: 670mm/480mm/400mm, max. batch weight: 150kg, max. door opening angle: 135°, max. spray pressure: 2bar, filling volume: approx. 1750l. Machine dimensions X/Y/Z: approx. 3450mm/2000mm/2700mm, weight: approx. 4200kg. Documentation available. An on-site inspection is possible. The machine has never been unpacked.

A vertical internal broaching machine (broaching tower) Karl Klink with lift table and loading portal is available. Broaching force: 63kN, broaching stroke: 1000mm, spindle stroke: 400mm, broaching speed: 7.5m/min, return speed: 24m/min, stations: 1, table width: 500mm. Machine dimensions X/Y/Z: approx. 3700mm/3000mm/3200mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.

Cycle time: approx. 31s, machine dimensions X/Y/Z: approx. 2200mm/2400mm/2300mm, weight: approx. 1500kg, control: Siemens. An on-site inspection is possible.

Two larger bar feeders with drum magazines and one smaller unit are available. 1) Kurt Breuning (IRCO) Profimat 65.8R/270.8, year of construction: 2008, guide channels: 8, max. material diameter: 65mm, max. bar length: 3200mm. 2) Kurt Breuning (IRCO) Profimat 65.8R/270.8, year of construction: 2008, guide channels: 8, max. material diameter: 65mm, max. bar length: 3200mm. 3) Kurt Breuning (IRCO) ILS RBK 10016, year of construction: 2005, max. material diameter: 100mm, max. bar length: 1600mm, height adjustment: approx. 250mm. Machine dimensions X/Y/Z: approx. 2350mm/1000mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Individual sale possible.

A flat steel bending machine for the production of ZB frames is available. Pneumatic pressure: 8bar, hydraulic pressure: 100bar, weight: approx. 5000kg. An on-site inspection is possible.

Dimensions (L/W/H): 6400x1500x1780 mmTotal power requirement: 19 kWWeight: 1800 kgControl: Arbeits- und Platzersparnis, sicherer Betrieb.Kombinierbar mit einer Hochgeschwindigkeits-Vierseitenfräse zu einer effizienten, automatischen Produktionslinie.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Máquina de medição Zeiss Vista BJ 2008

Key data: 6100 kg, 970 mm

Martelo de forja Beche KGH 8.0 remodelado (construído em 1980) O martelo foi completamente reformulado na Alemanha. A RAM (Schabotte) é de 2013. Sistema de Controlo: 2025 Descrição das obras de modernização: Acionamento hidráulico - Completamente desmontado em 2024, limpo, válvulas de controle substituídas Novo sistema de controlo - Sistema de controle PLC Siemens S7-1500F com painel de toque RAM (quadro em U) - Superfície de contacto com o solo - Inserção ajustada - Nova cunha fabricada e martelada Execução do teste - Martelo foi montado em 2024 e testado em 2025 Descrição técnica: Capacidade de trabalho: 80 kJ A altura máx. 600 mm (sem andorinhas) A altura min. 200 mm (sem caudas) Profundidade do urso: 810 mm Peso do urso: 6100 kg Peso Scabot: 105000 kg Peso total: 130700 kg Altura total: 7,3 m acima do nível do piso  ...

GOM - ATOS III Rev.02.1 - Dispositivo de medição 3D Estado: usado, muito bom. Especificações: Sistema de câmera: 2 x 8.000.000 Pixels da câmera: 2048 x 2048 pixels (aprox. 4 megapixels) Tamanhos de campo de medição XYZ: 150 x 150 x 100 mm até 2000 x 2000 x 2000 mm Distância do ponto de medição: 0,075 mm a 1,0 mm Tempo de digitalização: cerca de 2 segundos Volume de medição: 700 (incluindo placa de calibração) Tecnologia de luz azul: Medições precisas independentemente da luz ambiente. Incluindo EDP e dongle USB Versão do software 2023 Sistema Tritop (câmera, balanças 2x 1m, licença) Tudo em casos originais Com tripé, PC, rack, tela, pequenas ferramentas, pontos de referência, botão 1x Ligue e comece a trabalhar imediatamente...

A slightly used Uterna furnace is available. Documentation available. An on-site inspection is possible.