outras máquinas para trabalhar o metal usadas para venda (11,430)

Technical data Note: There was no original machine documentation. All subsequent technical data were read from the nameplate to the best of our knowledge and taken from publicly available sources. Manufacturer: COMCO Type: WE 680/4 Year of Make: 1988 Serial Number: 119 Machine Type: Hydraulic Press Operating voltage: 380 V Frequency: 50 Hz Motor power: 11 kW Max. pressure: 200 bar Press force: 300 kN Air pressure: 6 – 10 bar Machine weight: approx. 3,000 kg Configuration 4-post design Hydraulic power unit Safety Light Curtain (SICK) Protective grille / enclosure Electrical control cabinet with control panel Pressure gauge (pressure gauge) Hydraulic control with valve block

Stationary punching machine W. Meitinger "Record" from 1966. Machine is suitable for stamping and machining metal parts. Classic workshop machine with mechanical drive via electric motor and belt. Ideal for workshops, metal construction or as a robust industrial machine.

incl. light barrier "Sick LVS 600-2200"

Segment swivel bending machine pneumatic>br>- manual back gauge max. 830mm>br>- bending angle preselection via limit switch>br>sheet width 3000 mm>br>sheet thickness 2.0 mm>br>column width 3140 mm>br>opening width 80 mm>br>total power requirement kW>br>machine weight approx. 1.45 t>br>space requirement approx. 3.8 x 1.5 x 1.6 m

Profile bending machine with:>br>- foot pedal right/counterclockwise>br>- 1 set of standard rollers>br>- all 2 rollers are driven>br>- work horizontally or vertically>br>round material solid 35 (800) mm>br>square material solid 35 (1200) mm>br>angle steel 50 x 50 x5 (850) mm>br>flat steel 60 x 10 (800) mm>br>axis diameter 50 mm>br>working speed 4,, 5 m/min>br>roll diameter - tools 155 mm>br>total power requirement 1.5 kW>br>machine weight approx. 0.9 kg>br>Space requirement approx. 0.6 x 0.9 x 1.35 m

Hydraulic Hole Punching / Punching Machine Manufacturer: Mubea / Muhr and Bender Type: HP 1000/760 Punching force: 100 t Projection: 760 mm Maximum sheet thickness: 22 mm Connection: 400 V / 3 phases / 50 Hz Control voltage: 220 V Machine weight: 3600 kg Dimensions approx.: 1930 × 780 × 1980 mm Foot pedal control available

Material / Max Capacity / Min Radius Flat / 1 1/4" / 10">br>C Channel 1x2" / 60">br> Round Tube 1 1/2" / 20">br> Round Tube 2" / 60">br> Diameter of Rollers 1 1/2" >br> Maximum Pipe Diameter 38mm. >br> Condition: Never Used / New (5)

Electric profile roller with>br>- 5 set of rollers>br> 2x for round material 20mm and 30mm, >br> 1x for flat material>br> 1x for square material>br>- foot switch with emergency stop>br>round material 30 x 1 mm>br>square material 30 x 30 x 1 mm>br>round material solid 16 mm>br>square material solid 30 x 10 mm>br> speeds 9 rpm>br>total power requirement 1,,0 1 kW>br>machine weight approx. 0.32 t>br>space requirement approx. 0.82 x 0.60 x 1.26 m >br> condition: never used / new (5)

Rated power: 19 kVA; Rated current: 29 A; No-load voltage: 280 V; Output current adjustment: 30-120 A; Rated output voltage: 128 V; Max cutting thickness: 45 mm; Cyclic duration factor: 60%; Efficiency: 80%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact 6093

CNC Machining Center JOHNFORD VMC-850 | Year of construction 2023 | FANUC | 60-fold tool changer Manufacturer: JOHNFORD Model No.: VMC-850 Machine Type: CNC Machining Center Year of manufacture: 2023 Operating hours: approx. 667 h ⸻ CNC control • FANUC 0i-MF Plus • Manual Guide i • Dual Check Safety (safety software) ⸻ Spindle & Tool Changer • Tool changer with double-arm gripper • 60 tool positions • Tool holder: SK40 • Milling spindle: 5.5 / 7.5 kW • Speed: up to 12,000 1/min ⸻ Measuring & Cooling Systems • Glass scales in X, Y and Z axes • IKZ 30 bar through the spindle • Programmable air/water switching • Oil mist extraction, programmable • Renishaw OMP40-2 touch probe (wireless) • Renishaw OTS tool measuring tool setter (wireless) ⸻ Workspace • X-axis travel: 800 mm • Y-axis travel: 500 mm • Z-axis travel: 6 ...

CNC die-sinking EDM machine Charmilles Roboform 35P Travel X: 350 mm Travel Y: 250 mm Travel Z: 300 mm Table size: 500 × 400 mm Working container: 800 × 550 × 350 mm Max. workpiece size: 780 × 530 × 300 mm Max. workpiece weight: 500 kg Machine dimensions: 1900 × 1690 × 2400 mm Machine weight: 2500 kg Year of Make: 2002 Documentation available.

Various tool holders, most of them with tools With lattice box

Pressure 20 t>br>stroke 200 mm>br>table size 550 x 550 mm>br>Working speed: 10 mm/ sec.>br>Working height 940 mm>br>Tool height max. 200 mm>br>Total power requirement 2.2 kW>br>Bending power 200 x 10 mm>br>Weight 650 kg>br>Dimensions 1.1 x 0.6 x 1.22 m >br>Condition: never used / new (5)

Sheet metal bending machine with special dimensions:>br>- Capacity 700 x 4 mm>br>- Conical bending>br>- Swing-out top roller>br>- Safety device emergency exit line>br>- Documentation>br>- 400V>br>Sheet width 700 mm>br>Sheet thickness 4.0 mm>br>Column width 720 mm>br>Upper roll diameter 95 mm>br>Total power requirement 1.1 KW>br>Machine weight approx. 0.37 t>br>Dimensions approx. 0.95 x 0.76 x 1.25 mm

VEGA VEGAPLUS 69 , PS69. AXCSAAHXKMXXX ,IP66/67,Order 2522404/002 Made in Germany

Thermo electra Type 2xPT100-3L , Art no. P155555552001 , Prodwk 45-2004

Tool magazine Tool stations 80 pieces Maximum tool weight: 25 kg Maximum tool length: 500 mm Maximum tool diameter: 228 mm NC Rotary Table Division: 360,000 × 0.001° Swivel range: 360° Pallet changing system Pallet dimensions: 630 × 630 mm Coolant Setup Coolant pressure 50 bar

Empty box with wheels With a little effort you can get the inner workings out. Very robust

WZ recording similar to DIN1835-E whistle notch Ø6 ;max. output speed 10,000min-1; max. output torque 3.5Nm; Gear ratio 1:2,22

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

approx. 500 x 400 mm

Range consists of 2 x Hydraulic Pump, 1 x Unitest Testing Device, 1 x Ultrasonic Flowmeter Fluxus F601, 1 x Electric Screwdriver

Contents: tarpaulins, covers as well as various lashing straps and metal ratchets for securing the load

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

Polishing bench with 2 polishing brushes>br>grinding wheel diameter 250 mm>br>Number of stations 2 pieces>br> connection voltage 230 V>br>speed 2850 rpm>br>Total power requirement 1.5 kW>br>Machine weight approx. 25 Kg>br>Dimensions L x W x H 0.65 x 0.32 x 0.35 m >br>Condition: never used / new (5)

SICK WE260-F270. 6020979 Photoelectric Sensor - 1102

Tool magazine and tool changer Magazine Type: Chain Tool stations 80 pieces With electrical defect Coolant pressure 50 bar 2 additional work tables 400mm x 500mm