outras máquinas para trabalhar o metal usadas para venda (10,914)

Máquina de broaching Karl Klink RSI 2.5 EH - Ano de construção: 1965 - Força de tração 2.500 kg (25 kN) - Velocidade de broaching de 1 m/min a 9 m/min (variável infinitamente) - Curso máximo 800 mm - Diâmetro máximo da peça Ø 240 mm - Número de estações de limpeza: 1 - Motor 3 kW - Fonte de alimentação 380 volts / 50 Hz - Sistema de refrigeração integrado - Indicador de força de tração - Limitação da força de tração -Vários arbustos-guia (ver fotografias) -Pés de máquina LxLxH / 1,1x0,7x2 metros / Peso 1550 kg

Tesouras guilhotina WEIKA 3200x10mm -Máquina de Exibição / Não Utilizada -Comprimento de corte 3200mm -Espessura máxima de corte - aço 10mm Hjbkn Auowatxgj S Tjl - Espessura máxima de corte - aço inoxidável 6mm -Espessura máxima. de corte - alumínio 12mm -Manómetro digital elétrico -Pedal -Barreira de luz / Direita -Esquerda -Suporte frontal com rolos de esferas - Potência de transmissão 11KW Dimensões: LxLxH 4x2x1,9 metros / Peso 8000Kg

Key data: 160 kN, 50 mm, 1250 mm

Vende uma máquina de brochar usada da Karl Klink, modelo RSI 16. A máquina funcionou até ser desmontada. Três etapas de limpeza podem ser instaladas na máquina ao mesmo tempo. As dimensões da máquina são LxWxH 1700mm x 2000mm x 4100mm. O peso é de 4500kg. Incluindo acessórios como suportes, agulhas de brochar, etc. Como mostrado nas fotos. Se tiver mais perguntas, por favor contacte-nos. A máquina pode ser consultada mediante marcação prévia. Carregar, deitar-se, para um camião não é problema. A venda é sem garantia nem garantia. A declaração está excluída. Toda a informação sem garantia.

Clarador Rápido Klopp 1000 Largura total: 150 cm Comprimento total: 3.330 cm Altura total: 170 cm Largura de plaina: 750 mm Comprimento de trabalho: 1000 mm Largura da mesa: 900 mm

This 3-axis Exeron EDM 313 was manufactured in 2012. It features a control type 313 and operates with advanced software including exoUI V2.0.0.40. The machine has a total of 17,633 operating hours, with 7,830 hours on the control. If you are looking to get high-quality die-sinking capabilities, consider the Exeron EDM 313 machine we have for sale. Contact us for further details.

This 3-axis Wenzel XO 55 CMM machine was manufactured in 2009. It features a travel range of 550 mm in the X-axis, 500 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a robust table size of 800 x 600 mm with a maximum table load of 300 kg. If you are looking to get high-quality measurement capabilities, consider the Wenzel XO 55 CMM machine we have for sale. Contact us for further details.

This 3-axis Stratasys Objet260 Connex 3 was manufactured in 2017. It features PolyJet multi-material 3D printing technology and has a material capacity of 8 slots, including 6 model slots and 2 support slots. The machine is equipped with an external material cabinet and is certified with CE, FCC, and EAC markings. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys Objet260 Connex 3 machine we have for sale. Contact us for further details.

A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware sc ...

A Thielenhaus microfinish/superfinish machine for precision surface finishing of rotationally symmetrical components such as shafts, camshafts, crankshafts, and similar precision parts is available. Application range: shaft machining, max. machining length: 750mm, max. workpiece diameter: 100mm, max. travel: 650mm. Machine dimensions X/Y/Z: approx. 2100mm/1450mm/2050mm, weight: approx. 1800kg. Including SL50 belt finishing unit, Elbaron RON 60 SV oil mist extraction system, and workpiece holder. Documentation available. An on-site inspection is possible. The machine was used for sample machining and has hardly run.

This 3-axis GEHRING L2-630 was manufactured in 2013. It features a 6-station rotary table, including 2 honing stations, 2 measuring stations, and 1 brushing station, all automated. Ideal for precision honing applications. Contact us for more information.

This 3-axis Other SHEFFIELD Endeavor 9.15.7 was manufactured in 2003. It features an X-axis travel of 900 mm, Y-axis travel of 1500 mm, and Z-axis travel of 660 mm. The machine is equipped with a granite table and brushless linear motors on the X and Y axes. If you are looking to get high-quality measurement capabilities, consider the Other SHEFFIELD Endeavor 9.15.7 CMM machine we have for sale. Contact us for further details.

number of spindles: 6 spindle passage: 26 mmturning length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: Chuck size Ø 190 mm -Passage: Ø 60 mm -Bolt circle: Ø 170 mm -Interchangeable jaws: available in a wide selection, can be supplied for an additional charge -Dimensions: Ø 190 x 100 mm -Weight: 9.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 24 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/70/H70 mm -Total weight: 2.2 kg

Height gauge, parallel gauge, height measuring device, height measuring and marking device, height marker -Manufacturer: Carl Mahr, altimeter -Max. working height: 550 mm -Dimensions: 220/70/H635 mm -Weight: 2.2 kg

Height gauge, parallel gauge, height measuring device, height measuring and marking device, height marker -Manufacturer: KS Lenze, height gauge type C500-23 -Max. working height: 520 mm -Number: 2x height gauges available -Price: per piece -Dimensions: 240/175/H575 mm -Weight: 7 kg/pc.

Height indicator, parallel indicator -Max. Working height: 500 mm -Hard metal needle -Dimensions: 230/80/H650 mm -Weight: 3.4 kg

Height indicator, parallel indicator -Max. Working height: 500 mm -Hard metal needle -Dimensions: 615/120/H75 mm -Weight: 2.7 kg

A Rema wet grinding tube grinding machine is available. Motor power: 4kW, motor speed: 1450rpm, tube diameter range: 8mm-100mm, abrasive belt dimensions X/Y: 740mm/30mm. Documentation available. An on-site inspection is possible.

A Fanuc/DMG Mori robot handling system for CNC machines that was used with a CTX is available. Robot type: Fanuc M-20iA, Gripper 1: double gripper, Gripper 2: shaft gripper, max. workpiece weight in single-gripper operation/double-gripper operation: 10kg/2x5kg, max. workpiece diameter: 125mm, weight: approx. 1075kg. Including various storage stations and safety enclosure. Documentation available. An on-site inspection is possible.

Cutting length min./max.: 370mm/5100mm, max. cutting width: 375mm, max. cutting height: 150mm, saw blade diameter: 500mm, saw blade bore: 30mm, swivel range: 45°-90°. Machine dimensions X/Y/Z: approx. 6100mm/1450mm/1450mm, weight: approx. 700kg. An on-site inspection is possible.

This Nikon V-12BDC was manufactured in 2019. It features a 305 mm screen diameter, a measuring stage of 250 × 150 mm, and integrated XY and angle digital displays for precise measurements. The machine includes a 3-position objective turret for quick magnification changes and high-quality halogen illumination for clear imaging. Ideal for production control and precision mechanics. Contact us for more information about this machine.

Máquina EDM Sodick AQ 327L BJ 2006 Máquina EDM Sodick AG 60L BJ 2020

Sistema de Medição IM-6600 Transdutor IM-6120 Sensor CMOS: 6,6 MP monocromático Ecrã 10,4" Monitor LCD a cores Campo de visão: φ100 x 200 mm Unidade de ecrã mais pequena: 0,1 μm Iluminação telecêntrica de luz transmitida (anel de 4 segmentos) Precisão da Medição: Modo de medição de campo amplo: ±5 μm Modo de medição de alta precisão: ±2 μm Modo de medição de grande campo de visão: ±7 +0,02L μm Modo de Medição de Posição Fixa: ±4 +0,02L μm Tabela: Eixo X: 100 mm Eixo Z: 30 mm Capacidade de carga: 1 kg

Key data: 500 mm, 500 mm, 500 mm

O sistema foi pouco utilizado (ordem omitida) CMM DuraMax 5/5/5 ZEISS Máquina de Medição de Coordenadas CNC (CMM) em Design de Braço Desvio máximo permitido de medição do comprimento (MPE) de acordo com a ISO 10360-2:2009 Djwvuszb U Has Nu Iekn - MPE_E0 (3D) = (2,4 + L/300) μm para 18 - 22 C - MPE_E0 (3D) = (2,7 + L/250) μm para 18 - 26 C - MPE_E0 (3D) = (2,9 + L/200) μm para 18 - 30 C Desvio máximo permitido de sondagem de varrimento (MPE) segundo ISO 10360-4:2000 dentro do tempo máximo permitido de teste de varrimento (MPT) MPE_THP = 2,9 μm dentro de MPT_tau = 55 s de desvio da sonda única Forma segundo a ISO 10360-5:2010 MPE_PFTU = desvio de medição de forma de 2,4 μm segundo ISO 12181:2011 (VDI/VDE 2617 Parte 2.2) MPE_RONt (MZCI) = 2,4 μm

Travel X/Y/Z: 380mm/280mm/300mm, working dimensions X/Y/Z: 580mm/450mm/340mm, max. electrode weight: 50kg. Machine dimensions X/Y/Z: approx. 2100mm/1650mm/1750mm, weight: approx. 3500kg. An on-site inspection is possible.

CMM machine manufactured in 2021. This MAHR MARSURF CD 120 is a high-quality laboratory or quality measurement system designed for precise analysis of surface geometry, contours, and measurement parameters. It features a vertical travel of approximately 60–120 mm and a horizontal travel of approximately 100–120 mm. If you are looking to get high-quality measurement capabilities, consider the MAHR MARSURF CD 120 machine we have for sale. Contact us for further details.

CMM machine manufactured in 2019. This MAHR MARSURF GD 26 features a measuring path of 26 mm and a maximum measuring range of up to ±750 µm. It includes a motorized height adjustment of 7.5 mm and an automatic probe system zero setting. If you are looking to get high-quality measurement capabilities, consider the MAHR MARSURF GD 26 machine we have for sale. Contact us for further details.

x-travel: mmy-travel: mmz-travel: mmx-axis: 6000 mmy-axis: 2600 mmz-axis: 1600 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oven, heating oven, heating chamber, heating cabinet, hardening oven, annealing oven -Manufacturer:Artur Nolzen, Chamber dryer oven type KTS 53/30/70 -Temperature: max. 1100 °C -Chamber size: 710 x 535 x 300 mm -Heating output: 25 kW -Automatic temperature control -Individual components: see photos -Dimensions: 1630/1530/H1700 mm -Weight: 1698 kg