outras máquinas para trabalhar o metal usadas para venda (11,006)

Dados técnicos: Fabricante: Mahr Tipo: DIGIMAR CX 2 Ano da construção| 2005 Alcance de medição: 600 mm Força de medição: 1 N +/- 0,3 N Velocidade de sondagem: 10 mm/s Resolução: até 0,001 mm Dimensões e peso Dimensões L/L/H: 240 mm x 270 mm x 1.000 mm Peso: 16 kg Condição Condição: Usada Funcional: Testado e totalmente funcional Outros equipamentos e acessórios incluíam: Dispositivo de operação e avaliação DX 2 (teclado de membrana com pontos de pressão)

Rated current: 14A, rated power: 5.4kW, weight: 920kg, with documentation. An on-site inspection is possible.

Drying oven, drying cabinet, chamber dryer oven, preheating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet, universal oven -Manufacturer: Delair, Drying cabinet universal oven type SPX ED-400-TC -Usable space: 500/4070/525 mm -Heating power: 2000 W -Nominal temperature: 50 - 300°C -Voltage: 230 V -Dimensions: 760/720/H915 mm -Weight: 87 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth, 1 set -Jaw width: 20 mm -Attachment: Material steel -Dimensions: see photo technical drawing -Transport dimensions: 200/90/H85 mm -Total weight: 2.6 kg

Viagens Eixo X 600mm Eixo Y 400mm Eixo Z 300mm Eixo U ±50mm Eixo V ±50mm Dimensões máximas da peça de trabalho 990 x 620 x 295mm Carga máxima da tabela 550Kg Max. Konik ± 21º / 100 mm Peso da máquina 3700Kg Altura da máquina 2210mm Dimensões da máquina 2480 x 2980mm Diâmetro padrão do fio 0,15 a 0,3mm Peso máximo do carretel de arame (kg) 10 kg (P10) Qualidade da superfície Ra 0.35 Capacidade do sistema de água (l) 1000 Equipamento de maquinaria Transformador Controlador de Ecrã Tátil Windows CE Rosca Automática de Fios (AWT) Mestre SD Atuador Linear Tubular Eixos X/Y/Z/U/V de proteção contra colisão Resolução à escala linear de 0,1 μm Tampa do Filtro Acrílico em PC Caixa Remota Padrão Refrigerador de água Canhão de Flutuação Fechadura da porta de segurança 3 Filtros Design do Tanque de Água ...

Detalhes técnicos Dimensões e peso Peso total: 2.600 kg Comprimento total: 1.445 mm Largura total: 19.975 mm Altura total: 2.280 mm Especificações do Eixo Viagem no eixo X: 600 mm Viagem no eixo Y: 500 mm Eixo Z de viagem: 755 mm

Qty. 1 Linha de produção de formação de perfis em segunda mão – já em armazenamento Fabricação: Incheon Industry Machine Co Modelo n.º: 1250-RC Fabricado: 2019 Esta linha produz continuamente produtos com peso de 30 kg ou menos utilizando o sistema de conformação de rolos Método - Linha de formação para uso em placas de deck na construção de edifícios. Estado do estado: Desmontado, Stock em armazém Matéria-prima: Tira de aço laminada a frio Largura da tira: 1250 mm Espessura: 0,5 – 1,2 mm ID da bobina: 508 mm DI: 2000 mm Peso máximo: 15.000 kg Suportes de conformação: 40 suportes / 100 mm x 1250 mm de espaço Redutor do moinho Redutor de sem-fim Acionamento do moinho: 90 kW com redutor Velocidade da linha Máx.: 12,5 m/min Profundidade para a forma Máx.: 100 mm Fonte de tensão elétrica: 220 V, 3 ph., 60 Hz

Bruker Alicona µCMMYear of manuf. : 2022 Control : Sonstige Bruker alicona MetMaX Movement X/Y/Z : mm____________Description:In General:Measurement method:Non-contact, optical, three-dimensionalMaximum number of measurement points:500 millionMeasurement volume:310 x 310 x 310 mmTravel speed:100 mm/sDimensions:960 x 1,109 x 1,958 (2,288) mmWeight:approx. 1,250 kgMeasuring objectSurface texture:Any surface (including polished metals)Max. weight:30 kgMax. dimensions (W x H):680 x 375 mmEquipment:Rotary table:A-axis, C-axisLens changer:Automatic (4-position)Number of lenses:4 (WD 11, 17, 19, 30)Polarisation:Ringlight HP Vc1System monitoring:9 temperature sensorsControlServerSF:64-bit, 6-core, 32 GB RAM, 500 GB SSD, Windows 10Set-up mode:Handheld control unit

Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, segment jaws, stepped top jaws, top jaws -Manufacturer: Schunk, hard stepped jaws, 1 set = 3 pieces -Type: SZKA 213 Jaw width 30 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 70/90/H50 mm -Weight: 1.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece hard attachment jaw set -Width: 45 mm -Dimensions: see photo technical drawing -Overall dimensions: 130/135/H80 mm -Total weight: 6.7 kg

X-axis: 550mm, Y-axis: 350mm, Z-axis: 400mm, U-axis: 550mm, V-axis: 350mm, connected load: 12kVA, length: 2810mm, width: 2600mm, height: 2080mm, weight: 2.85t, operating hours: 28,608h, with documentation, an on-site inspection is possible.

Tap for blind hole drilling -Tap tools: extensive range -Type: Coarse and fine threads, see photos -Sale: only complete set -Transport dimensions: 1200/800/H120 mm -Weight: 205 kg

Laser de CO2 de 30 Watts Área de trabalho: 457 x 30 mm Gravação e corte de madeira, papel, borracha, acrílico, etc. Cubo Atmos de Extração PC: HP ProDesk 400G7 PC de Pequeno Formato incluindo monitor, teclado e rato. Software: RayJetManager pré-instalado

Dados técnicos: Fabricante: Garant Tipo: HC1 Ano de Fabricação: 1998 Alcance de medição: 600 mm Força de medição: 1 N +/- 0,2 N Resolução: até 0,0002 mm Dimensões e peso Dimensões: 24 cm x 25 cm x 100 cm Peso: aprox. 30 kg Condição Condição: Usada Funcional: Testado e totalmente funcional Outros equipamentos e acessórios incluíam: Dispositivo de controlo e avaliação HD1 (teclado de membrana com ponto de pressão)

Supply voltage: 1~ 230V AC, rated current: 16A, mains frequency: 50Hz, connected load: 0.64kA, CE marking. On-site inspection is possible.

Build volume including build platform: 250x250x325mm, laser type: Yb fiber laser (ytterbium), 1x 200W, 1x 400W, manufacturing process: metal powder bed fusion (DMLS/SLM), precision optics: F-theta lens, high-speed scanner, max. scanning speed: 7m/s, variable focal spot diameter: 100-500µm, power supply: 32A, connected load: 8.5kW, nitrogen generator: integrated, compressed air supply pressure: 7,000hPa, volume flow rate: 20m³/h, argon supply pressure: 4,000hPa, volume flow rate: 100l/min, length: 2,200mm, width: 1,070mm, height: 2,290mm, min. recommended installation space: 4,800x3,600x2,900mm, weight: 1.325t, operational hours counter: 1138h, both lasers must be configured or initialized before operation. On-site inspection is possible.

Equipped with two independent extruders, build volume: 260x350x340mm, standard nozzle: 0.4mm, interchangeable, additional sizes optional, layer thickness: 0.05-0.6mm, software compatibility: Simplify3D, Cura, Slic3r, file formats: STL, OBJ, G-code, print bed: heated glass/metal platform, temperatures: extruder up to 260°C/heated bed up to 120°C, power supply: 230V, 50/60Hz, length: 840mm, width: 750mm, height: 1,020mm, weight: approx. 400kg, total operating time: 131 days, 17h, 25min, 7s, longest print job: 2 days, 14h, 6min, 35s, filament consumption: 19,912.05m. On-site inspection is possible.

Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Finger milling cutter: indexable insert end mill with internal cooling, 2 pieces -Receptacle: Ø 25 mm -Diameter: 25 and 30 mm -Levy/Price: complete -Transport dimensions: 210/70/H40 mm -Weight: 1.0kg

Sistema de limpeza de peças Fabricante: Render Tipo: W 92 AM HD WT Ano de Fabricação: 2013 Câmara de lavagem de dados: Diâmetro do cesto: 900 mm Altura interna utilizável: 520 mm Capacidade de carga: 200 kg Desempenho da bomba Capacidade por litro: 240 Itr./min. Pressão: 3 bar Capacidade do depósito de lavagem: 130 Itr. Capacidade de aquecimento Depósito de lavagem: 8 kW Secagem: 4 kW Lavagem: 65 ºC Secagem: 130 °C Limitador de temperatura de segurança: sim Dimensões externas LxDxH (tampa aberta) / Peso Sistema de limpeza: 1.500 x 1.420 x 1.780 (2.300) mm / 390 kg Elétrico: 950 x 1.100 x 1.220 mm / 80 kg

Ram weight: 100kg. Including anvil block, anvil, standard dies and motor. Total weight: approx. 3400kg including anvil block. The machine was purchased in working condition in 2019 and has not been operated since. The hammer has very good compression and is in good condition. Low operating hours, no continuous operation. The sliding surfaces of the ram are greased. Documentation available. An on-site inspection is possible.

Drive: servo motors, individually for each axis, max. number of bending slides: 8, spring steel wire diameter: 0.2-1mm, copper wire diameter: 0.3-2mm, max. winding mandrel diameter: 10mm, max. winding spindle travel: 45mm, max. length of rotating initial leg: 50mm, end leg length: theoretically unlimited, winding spindle revolutions: limited by the winding spindle travel of 45mm, control system: 4-axis CNC positioning control Pronumerik Schleicher, the machine operates using DOS-based programming, including pay-off reel, accessories, operating manuals and documentation, well-maintained and in good condition. On-site inspection is possible.

General2 spindles automatic lathe - 2 cross slides - Main and counter spindle - Y axis on slide 1 - Y axis on slide 2 - C axis on main spindle - C axis on counter spindle - Chip tank with coolant system and coolant pump - Part unloading chute; Control: Numeric control Fanuc 32i Working areaBar diameter max.20 mmCounter spindle collet cleaningCounter spindle collet cleaning with coolant Changing kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B260 and bush-spindle syncronism Additional charge for belt type chip conveyorAdditional charge for belt type chip conveyor, compatible with shaft-unloading-device Specific chip removol systems (for example: scraping blades chip conveyors, with additional filtering systems) are recommended in case of short chip material machinin Oil mist filter for emulsion or oilOil m ...

GeneralTwo-spindle turning centre with - 2 cross slides - 2 turrets with 12 positions each (all driven) - main spindle and counter-spindle - 2 C-axis - 2 tool drives - Y-axis on slide 1 - chip conveyor - workpiece-unloading; Control: Fanuc 31i Working areaBar diameter max.50 mmTransport beltTransport belt for finished workpieces outside the machine DMG MORI NETSERVICEDMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics IoT connectorDMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS) Special equipmentAdditional bar capacity for main spindle from Ø 50 mm to Ø 65 mm (max. 5.500 RPM) Additional charge for cooling on turret (upgrade to) 50 bar instead of 25 bar

GeneralCNC Grindingmachine; Control: Fanuc 32iA Special equipmentRMS-Sensor Special equipment-Transformer - Handwheel - 680l coolant system Special equipment- Program memory (512kb) - Registerable programs (1000 pcs.) - Signal light (3-stage) - High-performance magnetic separator (120 l/min) - Bed cleaning - Coolant temperature control unit - Wheel spindle cooling function - ATC unit (6 tools)

GeneralUniversal machining centre; Control: 3D control Heidenhain iTNC 530 Working area 1Longitudinal500 mmCross420 mmVertical380 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20 -18000 rpmSpindle taperHSK-A 63 Pick-up toolchangerPick-up tool changer Number of tools 32 NC rotary table w. swivel axisNC rotary table with swivel axis Type of Measuring system Direct measuring system Table surface 500 x 380 mmCentre bore 30H7 mmMaximum load (table centre) 200 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 63 mmRotation speed max.4. Axis 33 rpm4. Axes (swivelling range) 360 x 0,001 degree5. Axes (swivelling range) 0 - 180 x 0,001 degreeRotation Speed 5. Axis 26 rpmRotary air leadthroughRotary air leadthrough for NC rotary table with swivel axis 2x G1/8 interface Special equipmentSealing air in swivel rotary table

GeneralCNC Swiss type lathe with Fanuc control; Control: FANUC 310 iTB Working areaTurning diameter33 mmDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55/1.1 KW Special equipment-Chip convoyer with discharge height 1200 mm Special equipmentRMS-Sensor Special equipment-Self-regulating double-cone guide bushing -600 l cooling system. 8 and 20 bar pump, paper belt filter - IEMCA Boss 545/32 e automatic bar feeder, max. length 3200 mm.

Offered for sale is a manual powder coating booth with a cartridge filter system. Technical data: Usable volume: 9.5m³, airflow rate: 12000m³/h, downward air velocity: 0.25-0.3m/s, total filter area: 160m², maximum powder melting point: 220°C, maximum dimensions X/Y/Z: 2200mm/200mm/2000mm. Control system: Integrated spray gun and control unit for manual powder coating. Equipment: Booth, platform, filter system, eight cartridges. Operation: 2020/2021 two-shift operation, subsequently approx. 30% daily utilization. System documentation available. Inspection possible by arrangement.

Offered for sale is an electric tempering oven with a maximum operating temperature of 250°C. Approx. dimensions X/Y/Z: 3000mm/2200mm/2500mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement.

Offered for sale is an electric tempering oven with a maximum operating temperature of 100°C. Approx. dimensions X/Y/Z: 1800mm/1800mm/1600mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement.

Máquina de EDM com fio FANUC ROBOCUT α-1iC Ano de fabrico 2004 Tipo A04B-0316-B001#E5 Dados Técnicos do FANUC ROBOCUT α-1iC Detalhes da Especificação Tipo de máquina: Máquina CNC de EDM com fio Modelo n.º: ROBOCUT α-1iC Número do seu artigo: A04B-0316-B001#E5 Data de fabrico: março de 2004 Número de Série: P043C1119 Controlo CNC: Série FANUC 180is-WB Eixos controlados: 5 – X, Y, Z, U, V Curso X: 550 mm Curso Y: 370 mm Curso Z: aprox. 310–410 mm (dependendo da configuração) Curso U: ±60 mm / 120 mm total Curso V: ±60 mm / 120 mm no total Velocidade de rotação rápida X/Y/Z: 900 mm/min Velocidade de rotação rápida U/V: 450 mm/min Tamanho da mesa: aprox. 780 × 600 mm Peça máxima aprox. 820 × 730 × 300 mm Peso máximo da peça: 1.000 kg Diâmetro do fio 0,10–0,30 mm Roscagem automática de fios: Sim Conicidade máxima aprox. ± ...