outras máquinas para trabalhar o metal usadas para venda (10,936)

Equipamento: 1 alicate para a direita 4 Unidades de Carruagens Campo de Trabalho: Espessura do fio: 0,5 - 2,0 mm Largura de banda: até 10,0 mm Duração do movimento; até 100 mm Saída: até 300 rpm

Equipamento: Cabine de proteção acústica BIHLER de uma peça Alicates de uma peça alimentam-se corretamente Prensa excêntrica de 1 peça 70 kN 4 unidades de trenó Norma Unidade de trenó estreito de 1 peça Campo de Trabalho: Espessura do fio: 0,5 - 3,5 mm Largura da correia: até 32 mm Comprimento de alimentação: até 170 mm Potência: até 250 rpm

Equipamento: 1 Alimentação Direita do Vagão 1 prensa excêntrica 250 kN 4 unidades normais de carruagem 1 unidade de carruagem estreita Campo de Trabalho: Espessura do fio: até 6,0 mm Largura da tira: até 80 mm Comprimento de alimentação: até 250 mm Potência: 10 - 250 rpm

Motor de tração: 400 V, 0,55 kW, 2.800 rpm. Gama de diâmetros de rosca: M 1 - M 6 Curso do fuso: máximo 15 mm Saída: máximo 120 rpm

Gama de bitola de fio: 1,5 - 7,0 mm Comprimentos de secção: até 8.000 mm Velocidade de avanço:

Capacidade de carga: máximo 1.500 kg. Espessura do fio: 0,5 - 9,0 mm Diâmetro exterior da cintura. máx. 1.000 mm Diâmetro interior da cintura. mínimo de 300 mm Velocidade: 0 - 80 rpm

Capacidade de carga: máximo 1.500 kg. Gama de bitola de arame; 0,5 - 6,0 mm Diâmetro da bobina: máximo 1.000 mm Velocidade: 0 - 80 rpm,

Gama de bitola de fio: 1,5 - 7,0 mm Comprimentos de secção: máximo 1.000 mm Velocidade de avanço: 29 - 90 mtr/min

Diâmetro do fio: 2,5 - 7,0 mm Comprimentos de secção: máximo 4.000 mm Velocidade de avanço; 40 - 80 NTR/min completo com carretel de fio não acionado

sheet width: - mmplate thickness: - mmdistance between columns: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A 2-tank spray/flood cleaning machine Mafac is available. Basket dimensions X/Y/Z: 660mm/480mm/338mm, max. batch weight: 100kg, spray pressure pump power: 7.5kW, spray cleaning directions: 5, basket batch flooding: 50%, filling volume: 830l, heating power: 30kW. Machine dimensions X/Y/Z: approx. 2200mm/1500mm/2050mm, weight: approx. 1400kg, control: Siemens Simatic S7-1500. Documentation available. On-site inspection is possible.

A heavy-duty rotary table is offered that was completely overhauled in 2024. Control cabinet: new, motors/components: new, table size X/Y: 3200mm/3200mm, max. table load: 40000kg. Travel distance table slide: 1750mm. Control: Siemens, measuring systems: Heidenhain, control cabinet in transport fixture, regularly maintained, documentation: original plans, wiring diagrams 2024, terminal plan, operating manual, machine weight: approx. 30000kg. Inspection is possible by arrangement.

A Hahndorf keyway slotting and broaching machine is available. Stroke range slotting: 60mm-300mm, max. slot width slotting: 34mm, max. slotting length: 300mm, max. slot width broaching: 14mm, max. broaching tool length: 640mm, max. cutting speed forward/return: 3m/3m/min, weight: approx. 300kg. Documentation available. On-site inspection is possible.

A small Striffler glazing bead saw is available. Cutting speed: 36m/s, working length: 2400mm, miter setting: 45°, max. cutting width: 75mm, max. cutting height: 50mm, saw blade dimensions X/Y: 250mm/220mm, weight: approx. 100kg. An on-site inspection is possible.

Two metalworking machines are available. 1) Carl Hurth LFV 3. 2) Busch Maschinenfabrik FSV 5, year of manufacture: 1965. On-site inspection is possible. Individual sale possible.

A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible.

Especificações: - Temperatura nominal / temperatura contínua até 1150° - Temperatura infinitamente variável - Ecrã de temperatura - Potência de 400 V / 5 kW - Dimensões interiores aprox. L 160 x  160 x Ré 360 mm - Requisito de espaço aproximado. W 850 x H 700 x D 600 mm - Peso aproximado. 140 kg

Offered is a cleaning and degreasing system with steam extraction fan and oil skimmer, year of construction 1996, basket: Ø720mm, internal height: 140mm, workpiece: maximum usable height: 450mm, maximum batch weight: 500kg, overhaul: 2011: completely overhauled, renewed: gear motor, heater, gas spring and heating elements, documentation: operating manual, technical documentation and CE declaration of conformity available, overall dimensions X/Y/Z: 1190mm/1170mm/1170mm, weight: approx. 290kg. Inspection: possible by appointment.

Oferta 25335 Especificações: - Temperatura nominal / temperatura contínua infinitamente variável até 1280° - Aquecimento em três lados (inferior + lateral) - Controlo de temperatura através do Controlador NABERTHERM C 19 - Transmissão 400 V / 5,5 kW - Dimensões interiores aprox. L 250 x  140 x Dr 350 mm - Volume utilizável 11 L - Estrutura base W 900 x H 900 x D 950 mm - Requisito de espaço aproximado. W 800 x H 600 x D 750 mm - Peso aproximado. 80 kg

A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/ ...

dressing device automatic: - dressing travel: ? mminfeed each handwheel rotation/division line: 0,05 mmtotal power requirement: - kWWeight: 40 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimension of workpiece: 2400 mmvoltage: 26,8 V: total power requirement: 26,8 kWweight of the machine ca.: 0,040 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Trimestre 1 Casa de fundição em segunda mão para produção de tarugos, incluindo sistema de filtração Mfc.: Gautschi, Mechatherm, Weishaupt, PEHAKA, FISONS, Dantherm Filtration GmbH Construído: Desconhecido A máquina tem um design muito robusto e continua a funcionar bem, pois tem sido sempre mantida com peças sobressalentes originais e especialistas qualificados. Fundição direta numa mesa vertical e fabricar tarugas de 6'' e 8''. Para fazer 9'', a ferramenta da tabela pode ser modificada. A roda vertical pode trabalhar com 9'' ao remaquinar e modificar a mesa de ferramentas. 1 Forno de fusão e inclinação GAUTSCHI, capacidade 20 t, queimadores de óleo combustível A fornalha tem uma máquina de carregamento de elevador para carregar a sucata do topo da fornalha Unidade de desgaseificação FILD da MECHATHERM England Tratamento e filtragem de azoto 1 Moldador verti ...

Max. operating temperature: 450°C, number of fans: 1, fan power: 0.75kW, power loss: 8kW, voltage: 400V, phases: 3, frequency: 50Hz, power supply: 26/26/32A, connected load: 18kW, control panel: Program Controller C40. With full documentation. The oven is in good condition, has been inspected regularly, and was in operation until recently. An on-site inspection is possible.

Offered is a straightening machine with cold rolling unit. 2-fold wire coil payoff, installed are: GSG COMBI rolling stand year 1994, GSG KWG.3 rolling stand year 1991, roller driver GSG ERT year 2007, straightening and cutting unit Wafios RBK51M year 2000, wire drawing unit 1 pass, wire diameter 6.0mm-12.0mm, max. speed 120m/min, min. cutting length 1600mm, cutting rate up to 80cuts/min, inlet strength approx. 50daN/mm². Package dimensions for finished material up to max. 14000mm length, up to 1000 bars per bundle. Length of the system approx. 5000mm. The system is offered without safety fence. Viewing possible by arrangement.

Travel X/Y/Z: 620mm/420mm/400mm, C-axis: 360°, workpiece clamping plate X/Y: 1000mm/600mm, working tank dimensions X/Y: 1070mm/670mm, max. liquid height: 400mm, max. table load: 1500kg, max. electrode weight: 50kg/250kg, pulse generator: EroForm 60A, filling volume: approx. 1200l, tool changer: disc changer, tool positions: 20. Machine dimensions X/Y/Z: approx. 2450mm/2550mm/2450mm, weight: approx. 4500kg, control: EXMF 10, generator hours: approx. 19300h. Documentation available. An on site inspection is possible.

Travel X/Y/Z: 450mm/350mm/400mm, travel U/V: approx. +/-70mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight without/with tank: 800kg/400kg, wire diameter range: 0.2mm-0.33mm, tank volume: approx. 750l. Machine dimensions X/Y/Z: approx. 2000mm/2300mm/2500mm, weight: approx. 4000kg, control: Agievision. Documentation available. An on site inspection is possible.

Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible.

Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection poss ...

Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure, External PC with contour management and Exprog software, Cooling unit for dielectric fluid, Automatic fire extinguishing system, Automatic central lubrication, Extraction system,, Measuring probe, Machine lamp, Workpiece carrier SK 40, Measuring mandrel SK 40, cutter outer diameter: Max. 320 mm, Shank tool diameter: 10-320 mm, Outer diameter disc-shaped tools: Max. 320 mm, Cutting length: max. 480 mm, X-axis travel: 500 mm, Tool weight: max. 20 kg, Y axis travel: 300 mm, Travel path W-axis: 200 mm, Machine space requirements: 2535 x 2200 x 2280 mm, A-axis rotation range: 360°, E-axis swivel range: 180°, Weight approx.: 4800 kg, Connected load: 5,4 kW, colour: grey RAL 7035/7043