outras máquinas para trabalhar o metal usadas para venda (10,788)

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck-Chuck size: Ø 250 mm-Throughout: Ø 80 mm-Short taper: 6-Weight: 36 kg

Máquina de Dobra de Fios WAFIOS Diâmetro do fio: 2 – 6,5 mm Ano de fabrico: 2017 Equipamento: Desbobinador, Vedação de Segurança, Rolos de Transmissão Estado: Muito bom estado, poucas horas de funcionamento Dados Técnicos – BM 30 Campo de operação, fio 600 N/mm²: 2,0 – 6,5 mm 1.200 N/mm²: 2,0 – 4,5 mm 1.900 N/mm²: 2,0 – 4,0 mm Alcance de trabalho alargado (op.): Fio de 1,5 mm de diâmetro. Rolos de alimentação: 3 pares Ângulo rotativo, eixo do mandil: Infinito Ângulo rotativo, eixo de flexão: Infinito Cabeça de flexão, curso para cima/baixo: +5 mm / -80 mm Curso lateral da cabeça de flexão: +40 mm / -40 mm Folga manual para recuar (mm): 300 / 700 / 1.000 Posicionamento da cabeça de flexão: +30 fixação Curso da placa de suporte CNC (opt.): +25 mm / -200 mm Velocidade máxima de avanço: 120 m/min Binário de ...

A Rausch robot-based deburring machine is available. Support height: 1050mm, spindle speed: 50000rpm, power: 1kW, max. burr thickness: 0.2mm, max. workpiece diameter: 500mm, gear types: straight/helical/angled, max. helix angle: 40°, max. chamfer angle: 45°, max. workpiece length over chuck: 450mm, max. workpiece weight: 50kg. Machine dimensions X/Y/Z: approx. 2050mm/1200mm/2100mm, weight: approx. 1300kg, operating hours: 1271h, utilization time: approx. 8h. Documentation available. An on-site inspection is possible.

Three cable processing machines from a complete extrusion line are available. 1) Spindle pay-off Ka-Be-Ma AS400, spool flange diameter range: 140mm-400mm, min. core diameter: 90mm, max. spool width: 300mm, max. spool weight: 50kg, conductor diameter range: 0.1mm-1mm, max. pay-off speed: 600m/min, tensile force: 0.5N-20N, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 1000kg. 2) Cooling section Ka-Be-Ma T-KW-UKW-A-1,5, Zone 1: Process: immersion cooling, temperature range: 70°C-80°C, length: 2000mm. Zone 2: Process: spray cooling/deflection section, temperature: approx. 25°C. 3) Dual take-up Ka-Be-Ma DWST400-1, spool flange diameter range: 305mm-400mm, min. core diameter: 156mm, max. spool width: 282mm, conductor diameter range: 0.1mm-1mm, speed: 600m/min, tensile force range: 0.5N-1.5N, max. spool weight: 80kg, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1 ...

À venda está um projetor digital de medição Keyence IM-8030 com unidade de controlo IM-8000. O ano de construção é 2023. Venda anterior e erros excetuados.

Tipo de Máquina: Dispositivo de Limpeza Ultrassónica Marca: Finnsonic Tipo: MC-360/III Ano de Fabricação: 2002

Basket dimensions: 1100x1100mm, usable height: 800mm, max. load weight: 700kg, spray pressure: 4.3bar, ambient temperature: 5-40°C, max. washing temperature: 90°C, material of media-contact parts: stainless steel V2A, power connection: 55A. With control cabinet and documentation. An on-site inspection is possible.

A glass cutting machine Lenhardt with a Tränker automation and control is available. Strip width: 777mm, strip length: 2366mm. Documentation available. An on-site inspection is possible.

A Krollmann pointing and rolling machine for pointing wire, round, and bar material in preparation for drawing processes is available. Machine body swivel: 90°, shear: available. Wire diameter range: 0.5mm-8mm. An on-site inspection is possible.

A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible.

Dados técnicos: Fabricante: Tesa Brown&Sharpe Tipo: Derby Etalon 454 Ano de Fabricação: 1998 Intervalo de medição X/Y/Z: X 457 mm, Y 508 mm, Z 406 mm Transdutor: Renishaw TP-ES Dimensões e peso Peso: aprox. 250 kg Condição Condição: Usada Funcional: Testado e totalmente funcional

A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

BJ Band Saw Kasto SBL 280 U 1998 Torno convencional E3N01 Torno Hurco TM8i Máquina de moagem superficial FSG-1640AD Wagner 1997 Empilhador Silent E R20-15 Fresadora de 3 eixos Hurco VMX24 Fresadora de 3 eixos Hurco VMX24 Fresadora de 3 eixos Hurco VMX30t Fresadora de 3 eixos Hurco VMX64 Máquina de EDM por fio Mitsubishi FA20 Máquina de Medição de Coordenadas CNC Zeiss Contura G2 2007

An automatic Munder blow-off system for cleaning cylindrical air filter cartridges is available. Compressed air supply: 6bar-8bar, quality: 5, nozzle pressure: 6bar, volumetric flow rate: 190m³/h, vacuum: 20kPa, max. filter height: 1400mm, max. filter diameter: 540mm. Documentation available. An on-site inspection is possible. Expected to be available June 2026.

A CNC laser marking and engraving system for component marking is available. Laser class: 1, laser type: diode-pumped Yb laser, laser power: 20W, axis travel X/Y/Z: 390mm/560mm/275mm, max. workpiece dimensions X/Y/Z: 730mm/365mm/445mm, max. workpiece weight: 50kg, control system: AC-Laser. Documentation available. An on-site inspection is possible.

Renovado em 2022 Distâncias de deslocação: X= 350 mm, Y= 250 mm, Z= 256 mm Curso do eixo U/V: +/- 70 mm Conicidade máxima: 30° a 100 mm de altura Dimensões máximas da peça: 750 x 550 x 250 (150 na banheira) mm Peso máximo da peça: 200 (em banho) / 450 (sem banho) kg Qualidade de superfície alcançável: Ra: 0,30 μm Tolerância média ao contorno: +/- 6 μm Taxa máxima de corte: 300 mm²/min Diâmetros de fio disponíveis: 0,20 – 0,33 mm Máquina de banho-maria com autom. Enfiamento e reenfiamento de fios após quebra de fio

GeneralUniversal machining centre; Control: 3D control Heidenhain iTNC 530 Working area 1Longitudinal500 mmCross420 mmVertical380 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20 -18000 rpmSpindle taperHSK-A 63 Pick-up toolchangerPick-up tool changerNumber of tools 32NC rotary table w. swivel axisNC rotary table with swivel axisRotary air leadthroughRotary air leadthrough for NC rotary table with swivel axis 2x G1/8 interfaceRotation Speed 5. Axis 26 rpm5. Axes (swivelling range) 0 - 180 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 33 rpmDistance between T-Slots 63 mmNumber of Slots 5Slot width 14 mmMaximum load (table centre) 200 KgCentre bore 30H7 mmTable surface 500 x 380 mmType of Measuring system Direct measuring systemSpecial equipmentSealing air in swivel rotary table

A CNC 10 axis pipe cutting system HGG including a plasma source Kjellberg HiFocus 280i is available. Pipe diameter range: 30mm-330mm, max. pipe load: 20kN, max. pipe length: 13000mm, max. workpiece weight: 2000kg, max. cutting angle: 70°, max. plasma cutting current: 280A. Documentation available. An on site inspection is possible.

An alkaline based single chamber cleaning system wash system is available. Containers: 3, total tank volume: 12.9m³, working dimensions X/Y/Z: approx. 8000mm/1200mm/1600mm, overall system dimensions X/Y/Z: approx. 19500mm/7200mm/4300mm. Documentation available. An on site inspection is possible.

Three similar profile milling machines CMS are available. Two of the units were used as spare parts carriers, therefore only one functional machine with 2 spare parts donors is referred to here. Spindle power: 7.5kW, tool holder: BT30, speed: 15000rpm, machining dimensions X/Y/Z: 620mm/1200mm/193mm, machining dimensions W/V: 2440mm/629mm, feed rate: 12m/min, positioning accuracy: 0.001mm, control: IBH/ATEC 6000HS, years of manufacture: 1992/1995/1996. Documentation available. An on site inspection is possible.

A multi-station transfer machine Riello with drilling and tapping units is available. Horizontal working units: 2x drilling units, 2x tapping units, 1x combined unit. Radial working units: 1x drilling unit, 1x tapping unit, 1x combined unit. Quill stroke: 100mm, spindle holder: SK40, rotary table type: TG 320, turret stations: 5, chuck diameter: 200mm, jaw opening travel: 12mm+12mm, spindle holder-chuck center distance: 225mm, total connected load: 23kW. Machine dimensions X/Y/Z: approx. 3700mm/3400mm/3050mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible.

A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible.

A heating and drying oven Horo is available. Connected load: 12.5kW. Max. temperature: 120°C. Heating power: 12kW. Volume: 2736l. Documentation available. An on-site inspection is possible.

A relatively modern corona pretreatment system for single sided aluminum foil coating is available. Material: aluminum foil, intended use: coating, coating sides: 1, web width: 1350mm, treatment width: 1450mm, treatment speed: 3m/min, roll diameter: 125mm, roll length: 1550mm, generator type: Softal 9030, generator power: 3kW. Total system dimensions X/Y/Z: approx. 2000mm/1550mm/1700mm, weight: approx. 1500kg. Including ozone exhaust system RD 4. Documentation available. An on site inspection is possible.

1 x Sistema de Medição Duplex ZEISS-Stiefelmayer Bauj. 11/1995 1 x Sistema de Medição Duplex Stiefelmayer Bauj. 1985 1 x sistema de medição Stiefelmayer construído em 1987 1 x sistema de medição Stiefelmayer construído em 1987

This 3-axis Werth Scope-Check 400 was manufactured in 2013. It features a measuring range of 400 mm in the X and Y axes, and 300 mm in the Z axis. The machine is equipped with a tactile probe system and operates on Windows 7 Professional. If you are looking to get high-quality measurement capabilities, consider the Werth Scope-Check 400 CMM machine we have for sale. Contact us for further details.

2 máquinas EDM: Charmilles Robofil 2020 BJ 1994 e Charmilles Robofil 4020 BJ 1996

Máquina de EDM por fio Fanuc alpha IB BJ 2002

Key data: 300 °C

Dados técnicos: Fabricante: Vötsch Tipo: NTL 60/60 Ano de Fabricação: 1999 Espaço utilizável: 0,2 m³ Potência nominal: 7,2 kW Temperatura nominal: 300 °C Sala de vapor: 0,39 m³ Fluxo mínimo de ar de escape: 0,2 m³ Condição Condição: Usada Funcional: testado e totalmente funcional

Máquina CNC de Corte por Plasma Portal Fabricante: Messer Tipo: Omnimat L8000 Ano de fabricação: 2005 Controlo CNC: Controlo Global Plus Largura da via: 8.000 mm Equipamento: 1 x unidade de corte de bisel oxi-combustível DAF/L preparações das juntas de soldadura (chanfras) 1 x Rotador Desviado com Fonte de Energia Kjellberg FineFocus 800 3 x ALFA de queimador oxi-combustível 1 x unidade de marcação FineMarker Sem tabela, filtro e pista de corrida