outras máquinas para trabalhar o metal usadas para venda (11,067)

turning diameter:830 mmturning length:4.000 mmturning diameter over bed slide:540 spindle bore:130 mmturning speed range:2 - 1.600 U/minrapid speed:4/5 m/minfeed speeds:1 - 2.000 mm/mintotal power requirement:55 kWdimensions of the machine ca.:7 x 2,2 x 2 mweight of the machine ca.:7,5 t

Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:150 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1285 kg

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm - total weight approx.:1100 kgTechnical description :KUKA Robot Pedestal with drilling pattern for Kuka robot KRC2.KR 210 robot was mounted.Total height 1200 mm.

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:90 kg - Reach:2696 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 HzDIMENSIONS / WEIGHTS:. - total weight approx.:1058 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:90 kg - Reach:2696 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 HzDIMENSIONS / WEIGHTS:. - total weight approx.:1058 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:120 kg - Reach:2896 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 HzDIMENSIONS / WEIGHTS:. - total weight approx.:1084 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:120 kg - Reach:2896 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 HzDIMENSIONS / WEIGHTS:. - total weight approx.:1084 kg

Article: pickoff with shaftManufacturer: Schüttepickoff with shaft for Schutte multi spindle automatic lathe SF67 pickoff C26GFpickoff shaft C26GF9S1gear WG-67Sholder B73GF1S1Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

automatic switch plate1x saw unit with saw, head and saw valve 40/801x turning unit with turning valve 30/60 with flange9x units 30/60 with valve normal and flanges5x units 20/50 with valve normal and flanges1x oil distributor WK9; 1x bar feeder 4 meters; 1x chip conveyor VR500;1x hydraulic unit1 Knoll oil filterWithout collets and ejectors, without platform and without tool monitoring.supplied tooling may differ from the pictures.We can send you more pictures.The scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 10400 €: 199.68 €: 20000 kg: 10000 to: 750 mm: 4500 mm: 300 mm: 2 x 70 mmConventional rotating fixtures are preferred in areas such as welding, painting and paint preparation,due to their cost-effective design and ease of integration.They are manufactured as standard with capacities ranging from 1 to 150 tons.Roller material: PolyurethaneCapacities up to 500 tons are also possible upon request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area:10700 mmTube length:300-11000 mmmin. workpiece diameter:80 mmmax. workpiece diameter:260 mmPower:120 KWdimensions:21,5 x 5 x 3,8 m mmweight:90.000 kgpre-turn capacity:200 cdm/minHS Code: 8461 90 00Description of the systemManufacturer / Type Vario 1200-11000 Year of manufacture 1999Intended use peeling machine for pipes and solid material with ultrasonic measuring system for detection of wall thickness deviations and correction of the same.Machine control SIEMENS 840 D - 6 axesMax. speed on the scraper/peeling device: n = 200 min-1

Automatic bar loading magazine for single spindle automatic lathe / short lathe, newTEST the new DB-EVO bar loader4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request)very high speeds even with profile materialManufacturer: Giovanni CucchiMachine type: Automatic bar loading magazine for single-spindle / short turningType: DB-EVODesign: Surface loading magazine or bundle loading magazinediameter range: 20-110mmDB-EVO at a glance:Scope of delivery and optionally orderable functions:- oriented loading of the bar material possible (e.g. edge upwards) - optional feeding of saw cuts and short parts possible - optional- Monitoring and fault diagnosis (touch screen)- Surface magazine- Bundles and other variants possible- automatic loading of short bars- Trays for tools- low power consumption (start/stop function)- Available in versions for 1.5, 1.8, 2.5, 3.3, 4.2 and 6.1 meter rod length  ...

Bar loading magazine for multi spindle automatic lathe, newManufacturer: Giovanni CucchiMachine type: Bar loading magazine for multi-spindleType: CMSP/CMSPFDesign: Side loader as surface loading magazine or bundle loading magazineCMSP / CMSPF at a glance:Proven technology - in use for decadesThe material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release.These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode.The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping sleeves of the ...

Erodiermaschine, gebrauchtBaujahr: 1989Bitte kontaktieren Sie uns für weitere Informationen und Bilder über mail(at)tar-mc.com oder www.tar-mc.com

tool taper:ABS-100 VDI

Auction-ID: A1-40976-11

screw size:45 mminjection shot weight in Polysterol:149 g/PSclosing pressure:100 kN

swing diameter:80 mmworkpiece length:450 mmweight of the machine ca.:3500 kg

weight of the machine ca.:3 t

table length:920 mmtable width:600 mmampere:13,2 Aweight of the machine ca.:6 tdimensions of the machine ca.:2,46 x 2,24 x 2,33 mX-axis:600 mmy-axis:400 mmZ-axis:260 mmmax. table load:1500 kgThe dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg.

Article: Rotary transfer machineManufacturer: PfiffnerType: Hydromat HB 32-45/16 CNCYob: 2013Electro-hydraulically controlled, fully automaticExtract from offer:Coolant system with chip conveyor and Knoll vacuum rotation filterHigh pressure pump 50 barSecond coolant ringWater cooler type 1600Collets type B32-45 UPControl: Siemens Sinumerik 840D - CNC / S7-PLC incl. modem (for teleservice)1 bar loading magazine type IEMCA: bundle loader (yob. 2011)1 Sawing unit: Saw blade D250mm2 Feed unit VE 26/80-HSK: Spindle stroke max. 80mm; spindle speed max. 7200 rpm; drive power up to 2.2kW; HSK 322 Vertical support 26/80 with 36° angular position2 drilling head 26/80-HSK: HSK 321 feed unit VE 36/100-HSK: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 404 Feed unit VE 36/100-HSK internal cooling: Spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive po ...

centre height:500 mmcentre distance:2000 mmcontrol:CNC Grundig Numerik total power requirement:400 V, 50 Hz, 22,5 kWweight of the machine ca.:3300 kgdimensions of the machine ca.:2500 x 4000 x 2400 mm

measuring range X-axis:150-300 mmmeasuring range Y-axis: mmTable dimensions: mmmeasurement range Z =:450 mmtool diameter: mmtool taper: SKcompressed air: bardimensions: mmachine weight ab.: kgclamping surface upper angle: Mounted on 1 cabinet, equipped with 2 monitors, with keyboard, 1 control computer, 1 operating data printer

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-47028-335

Oil filterCapacity:3 x 120 l/min; 3 bar3 x 140 l/min; 15 bar