partes elétricas usadas para venda (689)

Manufacturer: NIDEC SANKYO Model: SR8220-019 Year of Manufacture: 2008 Type of Machine: 200mm THIN WAFER Loader NSX Condition Good Weight 1,433 lb (650 kg) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: ACA Model: AGN2D2 Year of Manufacture: 2020 Condition : Good Weight: 1500 kg Input Voltage: 240V / 50Hz Phase: Single Power: 1500W Full Load Current: 7A Short Circuit Current: 30mA Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: ESSEMTEC Model: Convection Reflow Oven Year of Manufacture: 2016 Type of Machine: Reflow oven soldering station Condition: Good Exterior Dimensions: - Width: 24.016 in (61.0 cm) - Depth: 35.827 in (91.0 cm) - Height: 16.929 in (43.0 cm) Weight: 331 lb (150 kg) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Rasco Model: SO1800T Year of Manufacture: 2007 Power Supply: - 400V 3 / N / PE - 208V 3 / PE - 230V 1 / N / PE - 50–60 Hz - 6 kW Air Supply: 6 to 10 bar Exterior Dimensions: - Width: 37.008 in (94.0 cm) - Depth: 43.307 in (110.0 cm) - Height: 88.583 in (225.0 cm) Weight: 871 lb (395 kg) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: SMT Model: SMT 1.7 PC Year of Manufacture: 2006 Power: 27 kW Current: 42 A Voltage: 230/400 V, 3-phase + Neutral + PE, 50 Hz Condition: Used Compliance: CE certified Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Göpel Electronic Model: OptiCon BasicLine Year of Manufacture: 2011 Type of Machine : AOI System Voltage: 230V / 50Hz Current: 10A CE Marked: Yes --------------------------------------------------------------- Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Joysonquin Ningbo Model: Tesla Model Y Clip Machine Year of Manufacture: 2023 Type of Machine : Electrical Specifications: - Voltage: 3x400V AC / N / PE - Frequency: 50Hz - Power: 15 kVA - FLC (Full Load Current): 40A Air Requirements: - Pressure: 6 bar - Consumption: 800 L/min Weight: 2500 kg Remarks: Machine equipped with two KUKA robots: KR 10 R1100-2, One partially disassembled for spare parts Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Infinite Technologies & Robotics Model: SJ2020R0C0001-MP05 Year of Manufacture: 2020 Name of Machine : G2Y Clips Mounting Machine Voltage: 380V Current: 8A Power: 4 kW Weight: 3 Tons Certification: CE marked Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Cascade Model: 11000 Probe Station Five (5) Manipulators: - 1× MH-2 with magnetic base - 4× Vacuum-base manipulators: - MH-0307-52 - MH-2 - MH-7267-46 - MH-0307-14 Three (3) Pico-Probe Power Supplies: - Two fully functional - One for parts or repair Four (4) Pico Probes Assorted DC Probe Tips – Variety of tip styles included for different probing needs. TMC Micro-G Table (Model 63-511) – Precision vibration isolation table for enhanced measurement stability. NOTE: It is fully functional but Has error messages that will not clear during warm-up or Irradiation, several restarts required get through warm-up and function. The Manufacturer has determined the issue to be 1 of 2 PCB/module that are under $100 for both. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: IBL Model: MiniLab-01 Year of Manufacture: 2007 Type of Machine: vapor phase soldering system Voltage: 230 VAC Frequency: 50 Hz Main Fuse: 16 A (gL or C) Connected Load: 1.9 kVA Water Connection Requirements: - Min Pressure: 2.5 bar - Max Pressure: 4.0 bar Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Meier Model: ICOLAM 28/18 Type of Machine: Vacuum Laminator Technical Specifications: - Voltage: 3x 400V / N / PE - Frequency: 50 Hz - Current: 115 A - Power: 78 kW - Control Voltage: 24V DC Find more here - .ucymachines/ Contact us at - sales@ucymachines

The Paraquda series of pick and place systems combines large feeder capacity, fast programming and changeover while the machine is running (hot swap) 80 x 70 mm (alignment) including fine The Paraquda series automatic pick & place machines are designed to fulfil the requirements of a high mix SMT production. All SMD components are placed fast, reproducible and reliable using modern placement technologies. Paraquda machines offer the perfect overall concept of machine and software for productions where flexibility is required. - Barcode reader - Automatic width adjustment - Belt extension on outfeed side - Belt extension on infeed side available, but not fitted - Blow-off function for loading components that tend to stick to the suction cup stick to the suction cup - Four automatic center supports to stabilize the workpiece during placement placement - 4x suction cups type  ...

Manufacturer: DIMA Model: HS-100 This device is known for its high precision and versatility, thanks to its robust construction and motor-driven printing head, which moves on linear bearings. All printer settings can be precisely adjusted using an intuitive Windows-based interface, allowing for perfect configuration for every type of printed circuit board. The self-learning feature ensures quick and easy determination of the correct board position, simplifying operations and speeding up the production process Find more here - .ucymachines/ Contact us at - sales@ucymachines

3x VERSATRONIC RV1s P&P machines which are slow (1200cmp/h) but full fully functional and with a lot of feeders. These machines were manufactured in a UK factory Versatronic. Machine were named Violer, Rosie and Blue. The last one is faster, little better software for fiducial camera for components. All machine are working and were used for prototype and low series like 50pcs electronic or 25pcs or 200pcs electronic. All P&P machines have two cameras, one for fiducial (up camera) and one (down camera) for components. Machines can place without problem components down to 0402 and fine pitch component like QFN or VFQFPN48… Speed for firs two is 1200cmp/h the last one is around 1500cmp/h. All machines have tool changer with 10 positions and one tool for camera auto calibration. Only 5 different tools were used but can be used up to 10 different tools. On one machine you can put u ...

Electroplating test system for high flow / separation It does not have a control/transport cart and has not yet been used. That was our model system. It is a separator bath with 3 positions The positions are designed for vertical and horizontal arrival including a 25mm movement of goods. The buyer can view the system, and also dismantle it. High-performance test containers for ViaFill and AR 1:40 Features: - Aspect ratio up to 1:40 - Multifunctional system for panel & pattern plating, blind micro via plating, via filling plating, button and bridge plating - Suitable for flex circuit substrates up to 6.2 mm thick - Segmented anodes with 3 inert anodes per PCB - 372 slots for eductors with horizontal flow per PCB - Two-dimensional fabric movement in the copper cell The copper cell: Our copper cell is designed for PCBs from 18 x 25 to 21 x 24. Hydrodynamic conditions are guaran ...

Essemtec FLX2010 MKL Used assembly machine from Essemtec type: FLX2010 MKL with a vacuum table for assembly of printed electronic components. With vacuum pump and feeders. Voltage: 230V Current: 3A Find more here - .ucymachines/ Contact us at - sales@ucymachines

The Test Research Inc. (TRI) TR7550, introduced around 2010, is an Automated Optical Inspection (AOI) system designed for high-speed, inline inspection of printed circuit boards (PCBs) in electronics manufacturing. It utilizes a top-view 3-CCD color camera and four angled cameras to optimize test coverage, employing TRIs dynamic imaging technology to minimize vibrations and provide accurate, stable inspections before and after reflow soldering processes. Key features of the TR7550 include: - High-Speed Inline Color AOI: Ensures comprehensive inspection coverage. - Precise 3-CCD Color Camera: Capable of inspecting 01005 fine-pitch components. - Advanced RGB+W Lighting System: Enhances detection of solder and markings. - Linear Motor X-Y Table: Provides vibration-free, accurate inspection. The system is suitable for inspecting various component defects such as missing components, tombst ...

Manufacturer: EKRA Model: X4 PROF Weight: 920 kg Year of Manufacture: 2008 Nominal Voltage: 230 V AC Frequency: 50/60 Hz Working Voltage: 24 V DC Number of Phases: 1 Power: 1.2 kW Circuit Breakers: 16 A Pressure: 6 bar Maintenance status: Machine is not currently serviced, but is fully functional Operating hours: unfortunately no counter in the system; machine has been running on average in 1-shift operation since the beginning of 2008 Accessories: 2x squeegee 220mm, 65°; 2x squeegee 350mm, 65°; 2x squeegee 350mm, 45°; 2x squeegee 450mm, 65°; 2 support plates 275mm Documentation: complete system manual in paper form Operating system: WIN XP Software version: SCBDRV V6.11-2 Last maintenance July 2024, shortly before the system was dismantled. Maintenance documented back to 2021. No documents available before that Does the offered system have an integrated SPI? What c ...

Essemtec 1x CLM9000 but without a functioning laser beam Feeder ready for delivery: 2x CLM950 2x CLM952 1x CLM955 1x CLM9561x CLM950LED) Operating hours: 15282 Cassette slots: 6x 1x tray table Find more here - .ucymachines/ Contact us at - sales@ucymachines

SMD pick and place machines Advantage - Series Mimot system is expected to be available at the end of 2024 This system is part of an entire assembly line that can be purchased in its entirety 1) Infeed conveyor assembly 1 Easytrans - LP conveyor belt 1x600mm, width adjustment via CAN with Absolute encoder 2) assembler MIMOT Advantage active X 1 SMD assembly machine consisting of: 1 basic unit 1 feeder capacity for 184 S8 tracks (Applicable feeder types: TriligentFeeder™ and coded belt feeders / coded band feeders ) 2 head module, for holding a maximum of 5 (111140) assembly heads 6 assembly head for optical centering, with self-learning Z-axis (Touch-Sense technology) Arrangement: 2 head modules, each with 3 assembly heads 12 standard vacuum pipette 1112xx of your choice 1 autom. Changing station for 10 vacuum pipettes (occupies space for 6 S8 tracks) 1 PCB holde ...

Göpel Electronics Opticon Smartline The software dongle would have to be renewed at Göpel, which we can arrange Find more here - .ucymachines/ Contact us at - sales@ucymachines

Matrix 105 systems system one stripper Matrix 105 plasma Asher Plasma descum semiconductor equipment Applications Photoresist Stripping Matrix System One The Matrix System One Stripper plasma Asher Plasma descum semiconductor equipment represents the Industry Standard in single-wafer photoresist removal and the mainstay of the highly successful System One family. Developed in cooperation with many of the world’s leading IC producers, the Matrix System One Stripper plasma Asher Plasma descum semiconductor equipment has been designed for optimum performance and Cost of Ownership. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Turret Handler Ismeca Semiconductor NX16 Specifications: Supplier name: Ismeca Malaysia Construction year: 2011 Accessories: AssLabeling Laser A000 966 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Matrix Stripper E 145 system one stripper Matrix plasma Asher Plasma descum semiconductor equipment Applications Photoresist Stripping Matrix System One The Matrix System One Stripper plasma Asher Plasma descum semiconductor equipment represents the Industry Standard in single-wafer photoresist removal and the mainstay of the highly successful System One family. Developed in cooperation with many of the world’s leading IC producers, the Matrix System One Stripper plasma Asher Plasma descum semiconductor equipment has been designed for optimum performance and Cost of Ownership. Find more here - .ucymachines/ Contact us at - sales@ucymachines

BPM4900 Programming System - Description: 5-site system - CE Mark: Model 4900 APS - Included Features: Monitor arm, side, front & back door - Expandability: Can be expanded up to 9 stations - Accessories/Modules: - 2x TS1500 Automated Tray Stacking System - V-TEK TM-50 MK2 Tape Output Media - Supports up to 2D inspection cameras (8mm to 56mm tape width) - 4x Fiber Laser: Series Fiber Laser Marker - UltraVim UX 3D Coplanarity Inspection: - 3D Vision Inspection System for BGA, CSP, QFP, TSOP, SOIC, and QFN - Tape Feeders: - 1x 12mm Tape Feeder - 2x 24mm Tape Feeder - 2x 16mm Tape Feeder - 1x 32mm Tape Feeder - 2x 44mm Tape Feeder Find more here - .ucymachines/ Contact us at - sales@ucymachines

BPM3928 Programming System - Description: 4-site system - CE Mark: Model 3900 APS - Included Features: Monitor arm, side, front & back door - Accessories/Modules: - 1x TS1500 Automated Tray Stacking System - V-TEK TM-50 MK2 Tape Output Media: - Supports up to 2D inspection cameras (8mm to 56mm tape width) - 3,000 Series Fiber Laser Marker - UltraVim UX 3D Coplanarity Inspection: - 3D Vision Inspection System for BGA, CSP, QFP, TSOP, SOIC, and QFN Find more here - .ucymachines/ Contact us at - sales@ucymachines

2008 Mimot Advantage machine 2008 is expected to be available at the end of 2024 This system is part of an entire assembly line that can be purchased in its entirety 1) Infeed conveyor assembly 1 Easytrans - LP conveyor belt 1x600mm, width adjustment via CAN with Absolute encoder 2) assembler MIMOT Advantage active X 1 SMD assembly machine consisting of: 1 basic unit 1 feeder capacity for 184 S8 tracks (Applicable feeder types: TriligentFeeder™ and coded belt feeders / coded band feeders ) 2 head module, for holding a maximum of 5 (111140) assembly heads 6 assembly head for optical centering, with self-learning Z-axis (Touch-Sense technology) Arrangement: 2 head modules, each with 3 assembly heads 12 standard vacuum pipette 1112xx of your choice 1 autom. Changing station for 10 vacuum pipettes (occupies space for 6 S8 tracks) 1 PCB holder for automatic loading (in- ...

EKRA Drucker X3 Automatic Screen & Stencil Printer is expected to be available at the end of 2024 This system is part of an entire assembly line that can be purchased in its entirety It has a modified hood so that large stencils can also be used. This is the retrofitted stencil cleaning system (stencil underside cleaning). Installed in the machine The X3 automatic screen and stencil printer is specially designed for the flexible production demands of today’s market. The X3 can be used for the application of solder paste and / or glue onto PCBs, ceramics or glass substrates up to a size of max. 460 x 460 mm (18 x 18 inches). The standard EKRA screen and stencil holder has a flexible design which allows it to be used with all common stencils / screens up to 740 mm (29 inches) without use of an additional adapter. Quick clamp adapter systems of various manufacturers can e ...

SMT soldering oven 1.7 PC N2 is expected to be available at the end of 2024 This system is part of an entire assembly line that can be purchased in its entirety Find more here - .ucymachines/ Contact us at - sales@ucymachines

The products to be welded are loaded into suitable holders on a rotary indexing table. Assembly takes place in station 1, laser welding in station 2. The cell is designed as a sit/stand workstation. The products are placed in a rotary indexing table. After turning the rotary indexing table, the machine starts automatically. The machine is equipped with an automatic rotary indexing table, with friction wheel drive. A light curtain is not required. The drive slips in the event of an unforeseen load. Laser welding machine WOLF Quasisimultaneous Laser welding machine for Steller with semi-automatic rotary indexing table PC and touch screen included Find more here - .ucymachines/ Contact us at - sales@ucymachines