retificadoras usadas para venda (2,285)

: neu : ca. 6 Monate ab Auftragse : Taiwan : 197430 €: 3731.43 €: 1010 mm: 590 mm: 1000 x 400 mm: 1000 x 400 mm: 0 -25 m/min: 0 - 4000 mm/min: 0,001 mm: 450 mm: 450 mm: 0 - 3800 mm/min: 0.001 mm: 600 - 3600 1/min: 11 kW: 3675 mm: 4055 mm: 2480 mm: 6500 kg: 423 kg: 670 kg: 405 x 50 x 127 mm: 2,4 / 3,9 kW: 5.9 kW: 0,005 mm: 0,003 mmRigid machine construction with a movable columnfor effective stability to ensure high grinding performance and machining accuracySmart iControlIV control with 15", touchscreen with electronic wired handwheelPC-based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (4 front and 2 rear)All 3 axes with precision ball screws and AC servo mot ...

grinding diameter:300 mmgrinding length:600 mmcentre height:190 mmz-axis:865 mmx-axis:250 mmclamping length:1000 mmperipheral speed:45 m/secgrinding slide swivable +/-:8 °grinding wheel width x diameter:80 x 508 mmwork piece spindle speed:1 - 800 U/minweight of the machine ca.:5 tMachine with SIemens 840 C control- coolant device- Marposs measuring device

1 pc. universal whetstone (20mm wide) 1 pc. whetstone for HSS steel (40mm wide) Grinding wheel diameter 150 mm Grinding wheel width 20 + 40 mm Mounting diameter 12.7 mm Connection voltage 230 V Motor power 0.25 KW Weight 16 kg Dimensions L x W x H 0.37 x 0.2 x 0.24 m Condition: never used / new (5) Auction-ID: A7-48095-591

Saw blade grinding machine with: - Diamond grinding wheel for carbide circular saw blades - Rubber feet for damped and quiet operation - Spacers for different saw blade holes Without saw blade Saw blade diameter 80 - 700 mm Workpiece headstock motor 0.25 kW Grinding wheel diameter 125 mm Speed 2850 rpm Grinding range -20 to +20 degrees Machine weight approx. 12 kg Space requirements approx. 700 x 400 x 300 m Condition: never used / new (5) Auction-ID: A7-48095-422

grinding diameter:600 mmgrinding length:3000 mmcentre height:300 mmweight of the machine ca.:11,8 tdimensions of the machine ca.:7100x2300 mmspindle turning speed range:14 - 220 U/mingrinding wheel diameter:650 mmgrinding wheel flange for width 25-40 mm:3 Stk.open tailstocks:3 Stk.chuck:Ø310 mmfixed steady:320 mmDistance between center: 3000 mm.Height of centres: 300 mm.Spindle speed: (n°12) 14 - 220 RpmMax grinding diameter: 600 mm.Stroke the wheelhead:(rapid) 50 mm.Stroke the wheelhead:(rapid+ micrometrical): 1 5 500 m mmm. .Max grinding wheel diameter: 650 mm.Max tilt table: 3° 30'Total absorbed power: 27,7 HpDimension: 7100x2300 mm.Weight approx: 11800 Kg.

workpiece diameter:5-125 mmgrinding depth:50-1000 mmclamping length:1000 mmtotal power requirement:1.9 KVAweight of the machine ca.:630 kgmax. workpiece weight:100 kgCenter Hole Grinding Machine.Workpiece must be rotated by machine during grinding

grinding length:450 mmgrinding width:250 mmworkpiece height:280 mmTable area:760 x 250 mmgrinding spindle drive:2,5 kWgrinding wheel dia. x width:250x 25 mmgrinding spindle speed:1430/2900 U/minway of grinding spindle saddle, vertical:400 mmtotal power requirement:4,5 kWweight of the machine ca.:1,8 tdimensions of the machine ca.:1,8 x 1,4 x 2,0 mMachine equiped with magnetic plate- dresser

grinding length:450 mmgrinding width:250 mmworkpiece height:280 mmTable area:760 x 250 mmgrinding spindle drive:2,5 kWgrinding wheel dia. x width:250x 25 mmgrinding spindle speed:1430/2900 U/minway of grinding spindle saddle, vertical:400 mmtotal power requirement:4,5 kWweight of the machine ca.:1,8 tdimensions of the machine ca.:1,8 x 1,4 x 2,0 mMachine equiped with magnetic plate- dresser

grinding length:1250 mmgrinding width:600 mmworkpiece height:730 mmtable surface area:1720 x 500 mmheadstock: dist. table - spindle center:900 mmmax. longitudinal movement:X-1450 feed range:10 - 20.000 mm/minvertical movement:Y-730 mmfeed range:0,2 - 3.000 mm/mincross travel:Z-550 mmfeed range:5 - 5.000 mm/minpower capacity:1500 U/min.- 44 kW / 8000 U/min. - 38 kW kW grinding wheel turining speeds:50-6.000 U/mincutting speed:max. 80 m/sec.weight of the machine ca.:11 twith CNC SIEMENS 840 Cauto. dynamic balncing system integrated in the grinding conusprofile grinding unit ( on table mounted ) Diamant profile rollers ( dia. max 140 mm , width max. 200 mm, hole 52 H3 ) speed 3000 rpmtwo magnetic plates ( 1000 x 400 mm, 1200 x 350 mm ) divers Flanges ect.

honing diameter:51 mmstroke:300 mmspindle speeds::600 - 3000 U/minfeed range:1500 - 5000 mm/minspindle drive:1,1 kWweight of the machine ca.:0,8 ttotal power requirement:4 kWdimensions of the machine ca.:1,1 x 1,9 x 1,5 m

: neu : 2026 : 050162 : prompt, Zwischenverkauf v : Taiwan : 69940 €: 1321.87 €: 1 : 800 mm: 610 mm: 800 x 400 mm: 800 x 400 mm: 810 mm: 5 - 25 m/min: 0.74 kW: 10 kVA kW: 3540 mm: 2080 mm: 2100 mm: 2900 kg: 980 mm: 350 kg: 355 x 50 x 127 mm: 0,001 mm: 500 - 1.800 U/min: 3,75 kW: 1.1 kW10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatorautom. dressing atta ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 171130 €: 3234.36 €: 610 mm: 590 mm: 600 x 300 mm: 600 x 300 mm: 0 - 25 m/min: 0 - 4000 mm/min: 0,001 mm: 350 mm: 450 mm: 0 - 3800 mm/min: 0.001 mm: 600 - 3600 1/min: 11 kW: 3103 mm: 3933 mm: 2480 mm: 5800 kg: 810 mm: 314 kg: 420 kg: 405 x 50 x 127 mm: 2,4 / 3,9 kW: 3.9 kW: 0,005 mm: 0,003 mmRigid machine construction with a movable columnfor effective stability to ensure high grinding performance and machining accuracySmart iControlIV control with 15", touchscreen with electronic wired handwheelPC-based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (4 front and 2 rear)All 3 axes with precision ball screws and AC ser ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 156790 €: 2963.33 €: 1200 mm: 850 mm: 1200 x 500 mm: 1200 mm: 1200 500 mm: 5 - 30 m/min: 0 - 5000 mm/min: 0,001 mm: 560 mm: 0 - 2000 mm/min: 0.001 mm: 500 - 2200 1/min: 11 kW: 3.7 kW: 3.1 kW: 2.4 kW: 4600 mm: 2950 mm: 2745 mm: 4610 x 2290 x 2500 mm: 6400 kg: 900 mm: 930 kg: 1250 kg: 405 x 50 x 127 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (P4, checkout 7)Air purge spindleLongitudinal guides with double V shape, with Turcite-B coatingTransv ...

Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 200 mm Grinding wheel width 32 mm Mounting diameter 30 mm Connection voltage 230 V Motor power 0.9 KW Condition: never used / new (5) Auction-ID: A7-48095-602

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 956.67 €: 200 x 32 x 32 mm: 1 kW: 2800 1/min: 42 mm: 250 mm: 470 mm: 230 mm: 325 x 540 x 310 mmQuiet running, maintenance-free motorLaterally closed protective hoodsStable, adjustable workpiece supportsHigh safety comfort due to adjustable spark deflectorsSuitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc.Motor circuit breaker and undervoltage releaseSpark/eye protection on both sidesConnection cable with CEE plug 16 A1 grinding wheel each coarse and fine12 months warranty for single shift operationArt.Nr.: 317.762 table versionALTERNATIVE VERSIONS:Art.Nr.: 317.774with machine stand, emergency stop buttom and brakeArt.Nr.: 317.777 with MA400D integrated extractor, machine stand, emergency stop buttom and brakeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2015 : 5434 : prompt, Zwischenverkauf v : China : 2200 €: 1 : 1580 €: 2.000 x 50 mm: 250 x 50 mm: 400 - 2800 1/min: 35 mm: 2.2 kW: 1160 mm: 700 mm: 1850 mm: 150 kgbelt grinding- and polishing machine in one devicecontinuous variable revs by frequency converter2 clamping mandrelsquick action clamping chuckincl. underframeusers manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spacing of the toes: 400 mm; tip height: 175 mm; maximum grinding diameter: 350 mm; Piece weight: up to 80 kg between the ends / 120 kg in the air; X-axis: stroke 300 mm; Z-axis: stroke 485 mm; resolution 0.0001 mm; Studer patented preloaded hydrostatic guides; grinding wheel Ø500 x 63 mm, bore 203 mm; 7.5 kW grinding wheel spindle motor; wheel speed 1,400 to 3,200 rpm; Grinding headstock orientation ±8.5°; workpiece doll with ISO 50 / MT5 cone; workpiece speed 1 to 1,000 rpm; CM3 tailstock, sleeve stroke 80 mm, sleeve diameter 50 mm; GE Fanuc Series 16i-T numerical control; Faired machine with filter unit and separate control cabinet Auction-ID: A1-47716-20

: neu : 2024 : 5549 : prompt, Zwischenverkauf v : Taiwan : 63830 €: 1206.39 €: 1 : 1 : 610 mm: 610 mm: 600 x 300 mm: 300 x 600 mm: 650 mm: 700 mm: 5 - 25 m/min: 0 - 2,250 mm/min: 3 - 32 (0,001) mm: 320 mm: 5,5 kW kW: 0.74 kW: 1 kW: 1 kW: 2950 mm: 1490 mm: 2080 mm: 2200 kg: 355 x 50 x 127 mm: 1.450 U/min: 0,001 mm10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic s ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 7733 €: 149.25 €: 1 : 150 x 2.000 mm: 20 - 114,3 mm: 1 : 1 : 4 kW: 270 kgThe new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second.The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options.The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of mate ...

: neu : 2026 : 050163 : prompt, Zwischenverkauf v : Taiwan : 86820 €: 1640.9 €: 1 : 1015 mm: 600 mm: 1000 x 400 mm: 1000 x 400 mm: 670 kg: 1100 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 0,001 - 32 mm: 450 mm: 440 mm: 0 - 675 mm/min: 0.001 - 0.04 mm: 500 - 2.000 1/min: 5,5 kW: 1.5 kW: 1.1 kW: 1.1 kW: 3630 mm: 2682 mm: 2200 mm: 4400 x 2300 x 2400 mm: 4800 kg: 423 kg: 670 kg: 355 x 50 x 127 mm10,4", grafic NC-control on swiveling arm with touch screen for:- seletion of working mode, program creation, graphic condition control, alarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatoroil mist collectorautom. dressing attachment table mounted with compensationfully enclosed splash guard protection of working areagrinding wheelg ...

: neu : ca. 2 - 4 Wochen ab Auftr : 4533.22 €: 300 x 40 x 51 mm: 2,2 kW: 1250 1/min: 42 mm: 540 mm: 530 mm: 1180 mm: 800 x 600 x 1400 mm: 90 kgWith machine stand, integrated suction, emergency stop pushbutton and brake (Art.317.779)Quiet running, maintenance-free motorLaterally closed protective hoodsStable, adjustable workpiece supportsHigh safety comfort due to adjustable spark deflectorsSuitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc.Motor circuit breaker and undervoltage releaseSpark/eye protection on both sidesConnection cable with CEE plug 16 A1 grinding wheel each coarse and fineALTERNATIVE:Version without suction (Art. 317.776)Version without stand, suction and brake/emergancy push button (Art. 317.764)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 1896.69 €: 200 x 32 x 32 mm: 1 kW: 2550 1/min: 42 mm: 270 mm: 470 mm: 1050 mm: 600x800x1350 mm: 60 kgQuiet running, maintenance-free motorLaterally closed protective hoodsStable, adjustable workpiece supportsHigh safety comfort due to adjustable spark deflectorsSuitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc.Motor circuit breaker and undervoltage releaseSpark/eye protection on both sidesConnection cable with CEE plug 16 A1 grinding wheel each coarse and fine12 months warranty for single shift operationArt.Nr.: 317.774with machine stand, emergency stop pushbutton and brakeOPTION (price on request):Footpedal as emergency stopALTERNATIV MODELS:Art.Nr.: 317.762 table versionArt.Nr.: 317.777 with machine stand with integrated suction, emergency stop pushbutton and brakeThe data for this ad was created  ...

Industrial Belt Sander Robust industrial belt sander for sanding, deburring and finishing metal workpieces. The machine is equipped with a powerful electric motor, adjustable sanding arm and a heavy steel construction. Suitable for finishing welds, removing burrs and general metalworking within workshops and production environments. Offered in used condition with normal signs of wear, and construction workshops, mechanical engineering and general metalworking. Offered in used condition with normal signs of wear. Auction-ID: A1-47348-100

: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 €: 344.45 €: Dm. 200x78x78 mm: 2800 1/min: 300 mm: 300x150x55 mm: 350x150 mm: 500x160 mm: 3.6 kW: 1020 mm: 820 mm: 2170 mm: 440 kgThis Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it isequippedwith a long column supported by four bearings and is opportunely stiffenedby a sturdy column support.This Surface grinding machine, due to its stiffness and geometrical stability,is highly suitable for grinding with precision pieces of notable height: single or mass-produceddie-shop components, moulds, punches, gears and others.Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motorto the axis,equipping this model of Grinding machine with fixed table,allow preserving perfect work conditions over the years, too.CAST IRON BED to maintain the geometric stability ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 33970 €: 648.83 €: 457 mm: 450 mm: 457 x 203 mm: 450 x 200 mm: 500 mm: 530 mm: 5 - 25 m/min: 960 mm/min: 0,4 - 6 mm: 230 mm: - mm: 2850 1/min: 1,5 kW: 0.75 kW: 0.04 kW: 3,7 kW: 2200 mm: 1575 mm: 1950 mm: 1320 kg: 215 kg: 250 kg: 203 x 12,7 x 31,75 mmmanual vertical feedgrinding wheel spindle on 4 high precision angular contact bearingselectro-magnetic chuckcoolant equiptment 34 lt with magnetic separator and dust exhaustmanual dresser with diamondgrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED machine lampmachine and equipment according to the CE-regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Helsanit Industrial Belt Sander Industrial Helsanit belt sander suitable for sanding, deburring and finishing metal workpieces. Equipped with a heavy cast iron construction, electric drive and robust steel chassis. Widely used for finishing welds, deburring parts and general metalworking within construction companies and workshops. Offered in used condition with normal signs of wear. Auction-ID: A1-47348-95

grinding diameter: - mmgrinding length: - mmcentre height: - mmdiameter: - mmlength: - mmtool adaptor: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-46783-50

Auction-ID: A1-46783-54

: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4785 €: 100 x 2.000 mm: 20 - 76,1 mm: 1 : 1 : 3 kW: 220 kgThe AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipp ...