serras usadas para venda (1,225)

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 34400 €: 657.04 €: Doppelsäulenführung : 4380x34x1,1 mm: 20-100 m/min: 325 mm: 325 mm: 400x325 mm: rund 325 mm, quadrat 325 : rund 300 mm, quadrat 265 : rund 190 mm, quadrat 190 : 655 mm: 1.1 kW: 2.2 kW: 0.12 kW: 2130 mm: 2150 mm: 1650 mm: 1860 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 325 CGS NC (with servo instead of hyraulic feed) € 38.900,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade diameter: 520 mmBore diameter: 50 mmNominal voltage: 400 VTable dimensions: approx. 900 x 700 mmincl. SCHEPPACH ha 1000 extraction Auction-ID: A7-46287-186

max. speed: 4000 rpmmax. saw blade diameter: 305 mmID: 30 mmmax. cutting depth: 102 mmfor further technical data see nameplate Auction-ID: A7-46287-187

Saw blade diameter: 250 mm Auction-ID: A7-46287-59

Mössner band saw machine type SSF 630 Year of construction 2019 Serial number 31387 400V/50Hz, 24V DC control voltage Rated power 20.2 kVA, rated current 29.2 A, fuse 32 A (max. 63 A) 2-speed manual transmission and SEW Eurodrive frequency converter Cutting speeds 27–142 m/min and 410–2200 m/min Possible saw blade dimensions for manual transmission: 6 x 0.65 mm to 20 x 0.9 mm Impeller diameter 630 mm Max. cutting width 605 mm, max. cutting height 460 mm With feed table / table enclosure For the feed table with 4 T-slots, Mössner mentions a table inclination of approx. 8° to the right and 14° to the left Documentation / operating instructions available CE marking available Auction-ID: 04M-45T-1

Mössner Rekord SV 420 Cutting Capacity: Projection (width): 410 mm to 415 mm. Passage height (max.): 265 mm. Saw blade & rollers: Roll diameter: 420 mm. Saw blade length: 3150 mm to 3260 mm (standard dimension often specified as 3210 mm). Saw band width: 3 mm to 16 mm. Work table: Table size: 600 x 600 mm. Swivel: 15° to 30° to the left and right. Table height: approx. 1020 mm from the floor. Drive & Speed: Cutting speeds: Depending on the model variant, 8 stages (approx. 18–562 m/min) or continuously variable via manual transmission (30–2000 m/min) Auction-ID: A7-46048-51

Table size: 600 mm x 605 Auction-ID: A7-46048-225

: neu : ca. 4 Monate ab Auftragse : Türkei : 20100 €: 385.92 €: Doppelsäulenführung : 4800x34x1,1 mm: 20-100 m/min: 380 mm: 380 mm: 520x380 mm: rund 300 mm, quadrat 300 : 590 mm: 0.55 kW: 3 kW: 0.12 kW: 2850 mm: 930 mm: 1660 mm: 1330 kg2° inclined bandblade brushcontrol panelhydraulic vicehydromechanical blade tensioninverter for continous adjustable cutting speedlinear guidesoptical height adjustmentpressure adjustmentcoolant pumpsaw bandsecurity switchheavy duty gearbox1,2 meter roller tableuser manual in GERMAN or ENGLISHOPTION:turn table for mitre cutshydraulic top clampingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 33700 €: 643.67 €: Doppelsäulenführung : 6300 x 41 x 1,3 mm: 15 - 120 m/min: 440 mm: 440 mm: 640 x 440 mm: rund 440 mm, rechteck 400 : rund 250 mm, rechteck 250 : rund 390 mm, rechteck 390 : 860 mm: 1.1 kW: 4 kW: 0.12 kW: 3150 mm: 1850 mm: 2115 mm: 2050 kg3° inclined sawing bandblade brushcontrol panelhydraulic vicehydromechanical blade tensioninverterlinear wayheight adjustmentpressure adjustmentcoolant pumpsaw bladesecurity switchgearboxsyncronized movement of sawing arm/clamping jawhydraulic uplift of sawing frameuser manual in GERMAN or ENGLISHALTERNATIV:Version BMSY 440 CDGH NCwith automatic mitre adjustment by NC controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 27600 €: 527.16 €: Doppelsäulenführung : 5750 x 41 x 1,3 mm: 15 - 120 m/min: 460 mm: 460 mm: 520 x 460 mm: 585 mm: 0.55 kW: 4 kW: 0.12 kW: 3000 mm: 1200 mm: 1800 mm: 1650 kgRoller feed with manually adjustable stop with micro switchPiece counterLinear guide41 mm saw bladeControl panelHydraulic viceHydromechanical blade tensionHeavy duty gearboxCoolant deviceMechanical upper clampingPressure adjustmentInverter for stepless blade speedRoller conveyor 1.2 mChip brushOptical height adjustmentOperating instructions in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 104600 €: 1976.94 €: Doppelsäulenführung : 10430x54x1,6 mm: 20-100 m/min: 750 mm: 1300x700 mm: rechteck 850 x 750 mm : rechteck 570 x 750 mm : rechteck 850 x 750 mm : 930 mm: 4 kW: 11 kW: 0.12 kW: 5500 mm: 2280 mm: 3400 mm: 8500 kgHydraulic viceDigital display for angle indicationHydraulic saw arm clampingManual saw arm rotationContinuously adjustable saw arm lowering speedAutomatic saw frame lifting after cuttingSensitive cutting pressure regulation depending on material propertiesHydromechanical blade tension readable via pressure gaugeMobile control panelHeavy-duty, helical-toothed conical gearDriven chip brushBlade guidance via carbide plates and rollersAutomatic blade breakage protectionCoolant systemHydraulic saw frame liftingOperating instructions in GERMAN or ENGLISHOPTIONS:Roller tables and band saw blades on requestThe data fo ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 11070 €: 212.54 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 420x200 mm: rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm: 1600 mm: 1400 mm: 1800 mm: 438 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DOUBLE HEAD CUTTING MACHINE Inv. No. 13.109Z1 Make MECAL Model SW-453 Mach. No. 9001099 Year 2002 Useful cutting length 4.000 mm Max. lame diameter 500 mm Pneumatic inclination of the heads 90° / 45° - 22.5° Including: External inclination Feeler Auction-ID: A1-45737-169

Auction-ID: A1-45737-10

VERTICAL BAND SAWING MACHINE Inv. No. 12.895Z1 Make MÖSSNER Model SSF520 Wheel diameter 520 mm Table dimensions 750 x 800 mm Throad dept 510 mm Passage under upper guide 380 mm Cutting speeds Variables 18-160/240-2280 m/min Motor power 5.5 KW Net weight 1000 kg Max. thickness for fusion cutting 15 mm Including: Coolant Mushroom shaped emergency stop Auction-ID: A1-45737-117

: neu : ca. 4 Monate ab Auftragse : Türkei : 34400 €: 657.04 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 540 mm: 540 mm: 750x540 mm: rund 510 mm, quadrat 450 : rund 270 mm, quadrat 250 : 695 mm: 4 kW: 0.12 kW: 3000 mm: 1300 mm: 2150 mm: 2445 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmenthydraulic uplift of sawing frame3° inclined saw banduser manual in GERMAN or ENGLISH(the vertical hydraulic clamping shown on the photos ist op ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 46700 €: 891.97 €: Doppelsäulenführung : 8200x41x1,3 mm: 20-100 m/min: 810 mm: 750 mm: 910x750 mm: rund 600 mm, quadrat 600 : rund 360 mm, quadrat 360 : 725 mm: 4 kW: 0.12 kW: 4020 mm: 1600 mm: 2450 mm: 3970 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmenthydraulic uplift of sawing frameuser manual in GERMAN or ENGLISHOPTIONS: Hydraulic vertical clamping Micro cooling unit Laser linerThe data for  ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 25680 €: 490.49 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 (PLC) m/min: 20-100 (CNC/Touch) m/min: 300 mm: 240 mm: 420x200 mm: rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 220 mm: 835 mm: 0.37 kW: 0.12 kW: 3220 mm: 2050 mm: 1900 mm: 1090 kgVERSION PLC: adjustment of material feed by handwheel, counter and limit switchVERSION CNC:feed lenght and numbers by CNC (99 progamms)VERSION TOUCH: as CNC but with 7", touchscreen for easier operationautomatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declampautomatic feed 800 mm/strokechip conveyer (CNC/Touch)variable cutting pressureMachine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch)cutting fluid systemautomatic saw blade breakage detectionhydraulic vicessuggested max. diam. in automatic mo ...

Auction-ID: A7-45983-71

: neu : ca. 10 Wochen ab Auftrags : Italien : 11640 €: 223.49 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 300 mm: 240 mm: 420x200 mm: rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm: 1650 mm: 1200 mm: 1900 mm: 400 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.Optional equipmente: adjustable vice pressure EUR 330,--The data for this ad was created with ModulMWS - the software solution of Lo ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 9080 €: 175.24 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 300 mm: 240 mm: 420x200 mm: rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm: 1600 mm: 1400 mm: 1950 mm: 356 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10860 €: 208.51 €: Schwenkrahmen : 3120x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 370x140 mm: rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 830 mm: 1650 mm: 1200 mm: 1850 mm: 390 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 29800 €: 569.18 €: Doppelsäulenführung : 5400x41x1,3 mm: 20-100 m/min: 450 mm: 425 mm: 695 x 425 mm: rund 430 mm, quadrat 425 : rund 320 mm, quadrat 290 : 690 mm: 0.55 kW: 4 kW: 0.12 kW: 3090 mm: 1200 mm: 1940 mm: 1630 kgdouble linear guideshydraulic-mechanical bandtensionsaw bandbrushinfinitely variable cutting speedsensitive cut regulationbi-metal saw band 41coolant devicethermal overload protectionheavy duty gearoptical height adjustment3 ° inclined bandhydraulic clamping of the viceuser manual in GERMAN or ENGLISHOPTIONS: hydraulic vertical clamping micro cooling unit chip conveyer laser cutting lineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Swivel Auction-ID: A7-45983-75

Saw blade diameter approx. 280mm Auction-ID: A7-45983-85

Cutting depth: approx. 300 mm Foot operation on pallet Auction-ID: A7-45983-54

: neu : ca. 10 Wochen ab Auftrags : Türkei : 4200 €: 315 mm: 315x32x63 mm: 45 / 90 U/Min: 45 °: 45 °: rund 105 mm / quadratisch : rund 90 mm / quadratisch : rund 90 mm / quadratisch : 1,3 / 1,8 kW: 600 mm: 1000 mm: 1400 mm: 200 kgManual viceRobust double joint pivotLow-voltage start/stop switch in the handle45-degree left and 45-degree right mitre cutsSplit vice (clamps before and after the sawblade)Sawblade not includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 45100 €: 861.41 €: Doppelsäulenführung : 5200x34x1,1 mm: 20-100 m/min: 360 mm: 360 mm: 610x360 mm: rund 360 mm, quadrat 360 : rund 360 mm, quadrat 360 : rund 325 mm, quadrat 265 : 735 mm: 1.5 kW: 3 kW: 0.12 kW: 2850 mm: 2250 mm: 1870 mm: 2400 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 360 CGS NC (with servo instead of hyraulic feed) € 50.900,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 23800 €: 456.96 €: Doppelsäulenführung : 5200x41x1,3 mm: 20-100 m/min: 460 mm: 460 mm: 650x460 mm: rund 380 mm, quadrat 380 : 590 mm: 0.55 kW: 4 kW: 0.12 kW: 3100 mm: 1000 mm: 1800 mm: 1520 kgblade brushcontrol panelhydraulic vicehydromechanical blade tensioninverterlinear waymaterial limit shaftheight adjustmentpressure adjustmentcoolant pumpsaw bladesecurity switchgearbox1,2 meter roller tableuser manual in GERMAN or ENGLISHOPTION:turn table for mitre cutshydraulic top clamping from aboveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 6254 : prompt, Zwischenverkauf v : Italien : 15040 €: 288.77 €: 1 : Doppelsäulenführung : 3270x27x0,9 mm: 40/80 m/min: 300 mm: 300 mm: 350x260 mm: rund 210 mm, quadrat 210 : rund 110 mm, quadrat 110 : 830 mm: 1.5 kW: 1500 mm: 1600 mm: 1900 mm: 590 kghydraulicvice INCL. ADJUSTABLE CLAMPING PRESSUREsaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.Manufacturer warranty until 31.12.2026OPTIONS:Roller tables and ...