serras usadas para venda (1,301)

: neu : ca. 4 Monate ab Auftragse : Türkei : 82900 €: 1566.81 €: Doppelsäulenführung : 8400x54x1,6 mm: 20-100 m/min: 650 mm: 1000 x 600 mm: rechteck 660 x 600 mm : rechteck 440 x 600 mm : rechteck 660 x 600 mm : 880 mm: 4 kW: 7.5 kW: 0.12 kW: 4400 mm: 2270 mm: 2660 mm: 6520 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmentHYDRAULIC UPLIFT OF SAWING FRAMEuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the softwar ...

Drive saw blade: 2.2 kWHydraulic unit: 0.37 kWCoolant pump: 0.12 kWTotal power requirement: min. 2.7 kWCutting speed: up to 75 m/minSaw feed: hydraulicLowering speed: 0-250 mm/minSaw blade dimensions: 4100 x 27 x 0.9 mmMax. material weight: 250 kgCutting length: approx. 400 mmReference: Weilheim 2. gr. A - Lot 17 Auction-ID: A7-46763-344

Serial number: 814263423311032858Operating voltage: 230 VFrequency: 50 HzConnection: 1400 WSpeed: 4600 rpmMax. saw blade diameter: 216 mmReference: Common - Lot 39 Auction-ID: A7-46763-155

Serial number: M275930Power: 7.7 kWCurrent: 19 AVoltage: 400 VFrequency: 50 HzSpeed: 2820 rpmMax. machining length: 6000 mmReference: Groven - Lot 19 Auction-ID: A7-46763-316

Machine number 6418106052material discharge length approx. 1600 mmwith feed length approx. 2200 mmmax. material span approx. 250 mm (measured)max. material clamping height approx. 200 mm (measured)with discharge roller conveyors, 2 pieceseach approx. 1000 mm lengthmax. load t/mtotal material removal length approx. 4000 mmwith spare saw blades, approx. 8 pcs.Reference: Prologtec Lot 3 Auction-ID: A7-46763-126

Batch that is part of a combination of batches Auction-ID: A1-47254-77

Serial number: 08Y1083Speed range: 2810 rpmPower: 1.8 kWAmperage: 4.5A Voltage: 400 VFrequency: 50 Hzmin. saw blade diameter: 294 mmmax. saw blade diameter: 300 mmincl. roller conveyorlength approx.: 3500 mmReference: Groven - Lot 18 Auction-ID: A7-46763-315

Serial number: M274150Speed range: 2800 rpmVoltage: 400 V Frequency: 50 HzPower: 7 kWCurrent: 18 AMax. machining length: 6100 mmReference: Groven - Lot 22 Auction-ID: A7-46763-318

Serial number: 20243112Power: 1.5 kWCutting capacity round 90°: 225 mmCutting capacity square 90°: 200 x 200 mmCutting capacity flat 90°: 245 x 150 mmCutting capacity round 45°: 160 mmCutting capacity square 45°: 160 x 160 mmCutting capacity round 60°: 100 mmCutting capacity square 60°: 100 x 100 mmWorking height: 910 mmSaw blade dimensions: 2480 x 27 x 0.9 mmCutting speeds infinite: 20 - 90 m/minfor further technical data see photographed data sheetwith feed and discharge roller conveyorLength of the feed roller conveyor: approx. 3800 mmLength of the discharge roller conveyor: approx. 3000 mmTransport dimensions: 1400 x 1700 x 2080 mmReference: Schiller - Lot 1 Auction-ID: A7-46763-177

Auction-ID: A7-47100-11

cutting diameter: 360 mmsaw band length: 0 mmcutting width: 0 mmcutting speed: 0 m/mintotal power requirement: 1,0 kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 2,2 x 2,05 x 1,5 mHorizontal Bandsaw- Max. Miter Angle: 45°- Coolant System- Emergency Stop- 1300 mm Infeed Roller Conveyor- 2 Spare Saw BladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 060215 : Juni 2026, Zwischenverkau : Türkei : 9280 €: 179.1 €: Schwenkrahmen : 3160x27x0,9 mm: 20-100 m/min: 270 mm: 270 mm: 340x220 mm: rund 230 mm, quadratisch : rund 150 mm, quadratisch : rund 180 mm, quadratisch : 910 mm: 0.37 kW: 1.5 kW: 0.12 kW: 1730 mm: 770 mm: 1460 mm: 476 kgDIGITAL ANGLE READ OUTblade brushcontrol panelswivel frameinfinitely adjustable lowering with hydraulic cylinderhydraulic lifting of the saw framequick lowering with automatic switchover to working speed using a sensor pinmech. Vice with quick clampingcoolant equipmentmachine basechip collecting trayuser manualin GERMAN or ENGLISHOPTIONS:Roller tables and band saw blades on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-47249-216

Floor cutter with Honda engine 5.1kw; Blade holder 350mm; Device is defective Dimensions: 800mmx400mmx1200mm Auction-ID: A7-47086-64

Clipper Floor Cutter CS 451 #4503228901029 used Dimensions: 780mmx460mmx890mm Auction-ID: A7-47086-65

Concrete joint cutter Husqvarna: Disc diameter: 150mm; max. cutting depth:38mm; 3.6kw power;#20212500553 Dimensions: 800x600x1000mm Auction-ID: A7-47086-129

K770 power cutter from Husqvarna; Blade holder: 350mmx25.4/20mm BJ:2022; bellowed; Dimensions: 800x500x300mm Auction-ID: A7-47086-134

XtraTilt Combination KX037-4 / U36-4 Dimensions: 450mmx270x460mm Auction-ID: A7-47086-150

ring stone saw for masonry blocks; 3200W; in a suitcase; defective;#201818110017 Dimensions: 800x600x200mm Auction-ID: A7-47086-139

K770 power cutter from Husqvarna; Blade holder: 350mmx25.4/20mm BJ:2022; bellowed; Dimensions: 800x500x300mm Auction-ID: A7-47086-149

Floor cutter with Honda engine 8.2kw, blade holder: 500mm; Device is defective Dimensions: 1200x800x1200mm Auction-ID: A7-47086-71

masonry band saw for sawing aerated concrete blocks; 1.1kW nominal power; incl. roller table; Cutting Height: 760mm; Cutting length: 700mm; Dimensions: 1560x990x2210mm Auction-ID: A7-47086-132

Masonry cut-off saw 400V/7.5kW; Saw blade 900mm; defective Dimensions: 1800x1040x1600mm Auction-ID: A7-47086-81

K770 power cutter from Husqvarna; Blade holder: 350mmx25.4/20mm BJ:2022; bellowed; Dimensions: 800x500x300mm Auction-ID: A7-47086-156

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-47249-121

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 12200 €: 234.24 €: Schwenkrahmen : 3660x27x0,9 mm: 20-100 m/min: 320 mm: 300 mm: 320x300 mm: 640 mm: 0.37 kW: 2 kW: 0.12 kW: 1900 mm: 850 mm: 1300 mm: 770 kgRoller material feed with encoder and NC controlblade brushcontrol panelheight adjustment bar with limit switchhydromechanical blade tensioninverterhydraulic vicecoolant pumpsaw bladesecurity switch1,2 meter roller tableusers manual in GERMAN or ENGLISCHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade Ø 300 mm; overall size 130x120x170 cm; working height 90 cm; table size 106x91 cm; equipped with Maggi Steff 2034 power supply Auction-ID: A1-44305-33

cutting diameter: 335 mmcapacity 90 degrees: flat: 500 x 335 mmcapacity 45 degrees: round: 330 / 305 mmcapacity 45 degrees: flat: 320 x 335 / 305 x 335 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 335 mmsaw band length: 4400 x 34 x 1,1 mmControl: SIEMENS speed: 15 - 150 m/minwork height max.: 750 mmmaterial layer: max. 250 kg/mcoolant tank capacity: 80.0 ltr.oil volume: 30.0 ltr.power capacity: 5.5 kWweight of the machine ca.: 1980 kgrange L-W-H: 2900 x 2350 x 1900 mm current new price approx. 80.000 euros special price on requestEquipment:- MEBA double mitre bandsaw - fully automatic- with electric miter adjustment via servo motor Adjustment right up to 60° / left up to 45°- Material feed 0 - 600 mm // with multiple feed 0 - 9999 mm- Infinitely variable lowering speed 0-300 mm/min- Saw blade speed via frequency-controlled AC drive (15-150 m/min)- Automatic cutt ...

Auction-ID: A1-44305-36

Equipped with DSG 150 Eco fan, various manuals, roller conveyor H97xW41xL132cm, various machine parts/dies; including flexible hoses up to the ceiling Auction-ID: A1-44305-20