serras usadas para venda (1,275)

cutting diameter: 335 mmcapacity 90 degrees: flat: 500 x 335 mmsaw band length: 4400 x 34 x 1.1 mmspeed: 15.0 - 150 m/minwork height max.: 750 mmworkpiece weight: 250 kg/mcoolant tank capacity: 80.0 ltr.oil volume: 30.0 ltr.power capacity: 5.5 kWweight of the machine ca.: 1800 kgrange L-W-H: 2000 x 2200 x 1900 mm current list price: approx. 45.000 euros Special price available upon requestFeatures:- MEBA - Fully automatic two-column linear guide system Fully automatic machine for 90° cuts only- Automatic material feed - Continuously variable lowering speed 0â300 mm/min- Band saw speed controlled by frequency-regulated AC drive (15â150 m/min)- Automatic cutting pressure and feed monitoring- Hydraulic full-stroke material clamping- Automatic movement of the clamping blocks- Operatorâs manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200 x 88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,4 tdimensions: 1,2 x 0,9 x 1,5 mDisplay machine- Never used- 45° left/right miter- Head tilts up to 45° for bevel cuts (compound cuts)- Pneumatic dual quick-clamping system- Includes micro-spray system- Includes carbide saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 58000 €: 1096.2 €: Schwenkrahmen : 3120 x 27 x 0,9 mm: 15 - 101 m/min: 280 mm: 240 mm: 310 x 240 mm: rund 230 mm, quadrat 230 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 240 mm: 835 mm: 0.37 kW: 1.5 kW: 0.12 kW: 1.95 Nm: 1.95 Nm: 5150 mm: 3200 mm: 1950 mm: 5000 x 2200 x 1900 mm: 2150 kgCNC control with 7", touchscreen for the following functions:Feed length, workpiece count, and automatic saw frame rotation for frame adjustmentAutomatic feed 3000 mm / strokeVariable cutting pressureMachine with infinitely variable speedCoolant systemMotorized chip brushChip conveyorAutomatic saw blade breakage monitoringHydraulic vicesRecommended max. diameter of solid material in automatic mode: 150 mmOperating manual in German or EnglishOPTIONS:Hydraulic bundle clamping device, micro-spray device, variable clamping pressure,10", s ...

: neu : 2026 : 060214 : prompt, Zwischenverkauf v : Türkei : 7700 €: 148.61 €: 1 : Schwenkrahmen : 2730x27x0,9 mm: 35/70 m/min: 230 mm: 230 mm: 320x130 mm: rund 210 mm, quadrat 190 : rund 130 mm, quadrat 100 : rund 180 mm, quadrat 150 : 805 mm: 0.37 kW: 1.3 kW: 0.12 kW: 1350 mm: 700 mm: 1300 mm: 430 kgswivel frameinfinitely adjustable lowering with hydraulic cylinderhydraulic lifting of the saw framemechanical vice with quick clampingcoolant equipmentmachine basechip collecting trayuser manual in GERMAN or ENGLISHOPTIONS:Roller tables and band saw blades on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 9420 €: 181.81 €: Schwenkrahmen : 2450x27x0,9 mm: 35/70 m/min: 220 mm: 200 mm: 250x150 mm: rund 160 mm, quadrat 140 : rund 90 mm, quadrat 90 mm : 800 mm: 0.7 kW: 1330 mm: 1300 mm: 1880 mm: 350 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentutomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.OPTION:Adjustable vice pressure (R1) EUR 403,--The data for this ad was created with ModulMWS - the software solution of Logo ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 8300 €: 160.19 €: Schwenkrahmen : 3010x27x0,9 mm: 35/70 m/min: 260 mm: 240 mm: 330x120 mm: rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm: 1500 mm: 1400 mm: 1850 mm: 345 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10460 €: 200.83 €: Schwenkrahmen : 3010x27x0,9 mm: 35/70 m/min: 260 mm: 240 mm: 330x120 mm: rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm: 1600 mm: 1200 mm: 1800 mm: 390 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.Option:Adjustable vice pressure (R1) EUR 403,--The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 17770 €: 341.18 €: Schwenkrahmen : 3010x27x0,9 mm: 35/70 (PLC) m/min: 20-100 (CNC/Touch) m/min: 260 mm: 240 mm: 330x120 mm: rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 220 mm: 835 mm: 0.37 kW: 0.12 kW: 2800 mm: 2050 mm: 1900 mm: 1090 kgVERSION PLC: adjustment of material feed by handwheel, counter and limit switchVERSION CNC:feed lenght and numbers by CNC (99 progamms)VERSION TOUCH: as CNC but with 7", touchscreen for easier operationautomatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declampautomatic feed: PLC 800 mm/stroke, CNC/Touch: 600 mm/strokevariable cutting pressure.Machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch)cutting fluid systemautomatic saw blade breakage detectionhydraulic vicesmaterial chutechip brushsugge ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 8680 €: 167.52 €: Schwenkrahmen : 3120x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 370x140 mm: rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 830 mm: 1550 mm: 1400 mm: 1900 mm: 353 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10860 €: 208.51 €: Schwenkrahmen : 3120x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 370x140 mm: rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 830 mm: 1650 mm: 1200 mm: 1850 mm: 390 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10370 €: 199.1 €: Schwenkrahmen : 3120 mm: 35/70 m/min: 280 mm: 240 mm: 350x140 mm: rund 230 mm, quadrat 200 : rund 150 mm, quadrat 130 : rund 200 mm, quadrat 170 : 830 mm: 1550 mm: 1400 mm: 1750 mm: 420 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentdigital readout for mitre cutsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 11070 €: 212.54 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 420x200 mm: rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm: 1600 mm: 1400 mm: 1800 mm: 438 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 14110 €: 270.91 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 420x200 mm: rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm: 1600 mm: 1600 mm: 1800 mm: 488 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 9080 €: 175.24 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 300 mm: 240 mm: 420x200 mm: rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm: 1600 mm: 1400 mm: 1950 mm: 356 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 11640 €: 223.49 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 300 mm: 240 mm: 420x200 mm: rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm: 1650 mm: 1200 mm: 1900 mm: 400 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.Optional equipmente: adjustable vice pressure EUR 330,--The data for this ad was created with ModulMWS - the software solution of Lo ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 25680 €: 490.49 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 (PLC) m/min: 20-100 (CNC/Touch) m/min: 300 mm: 240 mm: 420x200 mm: rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 220 mm: 835 mm: 0.37 kW: 0.12 kW: 3220 mm: 2050 mm: 1900 mm: 1090 kgVERSION PLC: adjustment of material feed by handwheel, counter and limit switchVERSION CNC:feed lenght and numbers by CNC (99 progamms)VERSION TOUCH: as CNC but with 7", touchscreen for easier operationautomatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declampautomatic feed 800 mm/strokechip conveyer (CNC/Touch)variable cutting pressureMachine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch)cutting fluid systemautomatic saw blade breakage detectionhydraulic vicessuggested max. diam. in automatic mo ...

saw blade diameter: 315 mmcutting diameter: 100 mm: mmcutting speed: 40 / 80 U/mintotal power requirement: 1,2 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 0,8 x 0,6 x 1,65 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet length: 5600 mmMachine number: 83509Table dimensions: 900 x 900 mm Auction-ID: A7-49089-177

Machine number: 831097Blade length: 5600 mmTable dimensions: 900 x 900 mmincl. lot of saw blades Auction-ID: A7-49089-524

Machine number: 1042455Cutting length: approx. 3000 mmincl. right roller conveyorRoller conveyor length: approx. 2000 mmRoller conveyor width: approx. 350 mmRoller conveyor left Length: approx. 3000 mm and width: 350 mm Auction-ID: A7-49089-156

cutting diameter: 15 - 300 mmsaw band length: 4640 mmcutting width: 1,3 mmcutting range - square -: 300 x 300 mmfeed length: 600 mmfeed length: multiple: 5400 mmdimensions of saw-band: 4640 x 41 x 1,3 mmcutting speed: 19 - 130 m/minmin. cut-off length: 10 mmheight of material-table: 700 mmtotal power requirement: 7 kWweight of the machine ca.: 2,7 tdimensions of machine L x W x H: 2,35 x 2,34 x 1,95 mAccessories: chip conveyor, DRO for cutting length, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 290 mmcapacity 90 degrees: flat: 320 x 290 mmcapacity 45 degrees: flat: re 240 x 150 mmcapacity 45 degrees: round: re 240 mmcapacity 60 degrees: flat: re 150 x 180 mmcapacity 60 degrees: round: re 150 mmcapacity 45 degrees: flat: li 240 x 100 mmcapacity 45 degrees: round: li 240 mmturning speed range:: 20 - 100 m/minsaw band length: 3100 x 27 x 0.9 mmpower capacity: 2.4 kWweight of the machine ca.: 570 kgrange L-W-H: 1800 x 950 x 1550 mm Current list price: approx. 12.000 euros Special price upon request Features:- Semi-automatic electro-hydraulic band saw (INDUSTRIE)- Suitable for single-piece and small-batch production- Large, ball-bearing-mounted cast-iron rotary table For miter cuts from 45° left to 60° right- Hydraulic cutting feed Material clamping - Continuously variable band speed (Model F)- Ergonomic control panel- Micro-spray lubrication system (spray oil ...

cutting diameter: 300 mmcapacity 90 degrees: flat: 320 x 290 mmcapacity 45 degrees: flat: re 300 x 280 mmcapacity 45 degrees: round: re 300 mmcapacity 60 degrees: flat: re 190 x 200 mmcapacity 60 degrees: round: re 200 mmcapacity 45 degrees: flat: li 270 x 200 mmcapacity 45 degrees: round: li 270 mmturning speed range:: 20 - 100 m/minsaw band length: 3660 x 27 x 0.9 mmpower capacity: 2.4 kWweight of the machine ca.: 650 kgrange L-W-H: 2050 x 1170 x 1600 mm Current list price: approx. 15.000 euros Special price available upon request Features:- Semi-automatic electro-hydraulic band saw (INDUSTRIE)- Suitable for single-piece and small-batch production- Large, ball-bearing-mounted cast-iron turntable For miter cuts from 45° left to 60° right- Hydraulic feed mechanism Material clamping - Ergonomic control panelâfront right, swiveling - Coolant system- Operatoration manual Semi-auto ...

Machine number: 4818Operating voltage: 400 VFrequency: 50 HzRated current: 1.5 AGrinding wheel diameter: approx. 250 mm Auction-ID: A7-49089-377

saw blade diameter: 550 mmUnder-table saw for aluminum and PVCHydropneumatic saw blade feedTwo-hand operationMinimum-quantity lubrication systemTable rotates on both sides, with locking positions at +/-45° and +/-60°Mitre cuts up to 60° on both sidesFull protective guardvery good condition!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: 280 mmCutting height: 150 mmMotor output: 2 x 4,0 kWsaw blade: 420 x 30 mmCutting length: 6000 mmspeeds: 2800 U/minair pressure: 7 barweight of the machine ca.: 1750 kgdimensions of the machine ca.: 7550 x 1600 x 1450 mmFurnishing:- Control E 255- Extraction ESTA DUSTOMAT-22 Bj. 1998- roller conveyor- 2x saw blade 120 x 4.0 x 30 Z96The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mmsaw band length: 3900 mmtotal power requirement: 3 kWweight of the machine ca.: 0,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 305 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 45210 €: 863.51 €: Schwenkrahmen : 3120x27x0,9 mm: 20-100 m/min: 280 mm: 240 mm: 310x240 mm: rund 230 mm, quadrat 230 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 240 mm: 835 mm: 0.37 kW: 1.5 kW: 0.12 kW: 1.95 Nm: 1.95 Nm: 2800 mm: 2000 mm: 1820 mm: 1200 kgCNC control with 7", touchscreen for following functions:feeding length, pieces and rotation of the bow for mitre cuttingautomatic feed 1000 mm / strokevariable cutting pressuremachine with speed variatorcoolante equipmentmotorizes chip brushchip conveyerautomatic saw blade breakage detectionhydraulic clamping vicesRecommended max. diameter of solid material in automatic mode: 150 mmuser manual in English or GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 61300 €: 1158.57 €: Doppelsäulenführung : 6000 x 41 x 1,3 mm: 20 - 100 m/min: 560 mm: 560 mm: 600 x 560 mm: 810 mm: 2.2 kW: 5.5 kW: 0.12 kW: 3250 mm: 2200 mm: 2350 mm: 4500 kgHydromechanical band tensionContinuously variable bandspeed (inverter)Linear guideFeed vice with servo drive with 700 mm stroke or 9.999 mm for multi-strokeControl panel with touchscreen (50 cutting lengths / 30 programs)Planetary gearboxSaw pressure adjustmentBand deflection sensorCoolant deviceChip brushOptical height adjustmentOPTIONEN: Hydraulicupper clamping Micro cooling unit Roller table3 m Laser cutting lineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.