outras máquinas para trabalhar o metal usadas para venda (10,815)

CONTROLS  CNC controls TECHNICAL SPECIFICATION  current generation (max): 3600 A  Table-size         : 660 mm  Table-size         : 540 mm  Working head: electr.clamping surf.: 375 mm  .. x: 545 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 2200 mm  space requirements -front/back-: 2560 mm  total height: 2870 mmThe precision electrochemical metal machining (PECM) process is the further development of electrochemical countersinking. High-precision tools can also be machined from super alloys (Inconel, Hastelloy, etc.) and PM steels without process-related tool wear.Natural granite machine frameWorking area 800 mm x 640 mm (W x D)Machine table 660 mm x 540 mm (W x D)Maintenance-free precision work axis with direct driveFixture attachment via 6 T-slot rails (M10) in the machine tableReal-time system for process control and short-circuit detecti ...

CONTROLS  electronic controls WORKING RANGE -HONING-  stroke max.: 170 mm  stroke min.: 6 mm  stroke rate (max.): 500 /min  stroke rate (min.): 60 /minWORKING RANGE -INTERNAL HONING-  Spindle speed    from: 200 /min  .. to: 3000 /minELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1200 mm  space requirements -front/back-: 1600 mm  total height: 1900 mm  total weight approx.: 750 kgincluding partial equipment

CONTROLS  CNC controls SIEMENS 840 D SL CHARACTERISTICS HEAT TREATMENT EQUIPMENT  heating method: induction DIMENSIONS / WEIGHTS  space requirements -left/right-: 8044 mm  space requirements -front/back-: 8046 mm  total height: 4000 mmELECTRICAL SPECIFICATIONS  mains power supply: 624 kVAPower Data:Mains connection power: 624 kVAMains voltage: 400 VRated current: 900 AMains frequency: 50 HzTransformer:Power: 560 kVAVoltage: 400 / 580 VCurrent: 809 / 558 AFrequency: 50 HzConverter:Power: 552 kVA / 450 kWVoltage: 750 VCurrent: 667 AFrequency: 6 – 10 kHzStarting:Power: 50 kWVoltage: 400 VCurrent: 90 AFrequency: 50 HzAuxiliary Equipment:Voltage: 400 VCurrent: 25 AFrequency: 50 HzControl Voltage:Voltage: 230 / 24 VCurrent: 5 / 40 AFrequency: 50 Hz / DCAutomation KUKA Roboter

CONTROLS  electronic controls BOSCH REXROTH CML 40.2 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE  length: 50 mm  diameter: 700 mmELECTRICAL SPECIFICATIONS  total power consumption: 100 kWThe machine processes workpieces with an outer diameter of 20–50 mm and lengths between 300 and 700 mm. With a cycle time of approximately 20 seconds, it enables high production speeds whilst maintaining consistent quality.

CONTROLS  electronic controls ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1500 mm  space requirements -front/back-: 1250 mm  total height: 2100 mm- Polishing cell C710 (1970 houres in production)Equipment of the machine:Collaborative UR3 e-series robot with intuitive HMIAutomatic compensation for tool wearPolishing station Crevoisier C5100 (drive polishing tools)Spindle for holding standard Crevoisier colletsIntegrated suction with 14m/sRenishaw measuring probe for position detectionPalletizing for approx. 40 STK 2 Pal.Two polishing paste dispensers with a capacity of three liters each

CONTROLS  CNC controls WORKING RANGE -WIRE CUTTING-  X-axis travel: 500 mm  Y-axis travel: 350 mm  z-axis travel (vertical): 426 mm  conical operation for max.: 30 °  U-axis travel: 140 mm  V-axis travel: 140 mmWIRE SYSTEM  wire diameter (min): 0.15 mm  wire diameter (max): 0.33 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1940 mm  space requirements -front/back-: 2300 mm  total height: 2600 mm  total weight approx.: 4200 kg

CONTROLS  electronic controls

CONTROLS  electronic controls PRESS DESIGN  number of suspensions: 2   opening in table: yes PRESS FORCES  total force (nominal): 45 toPRESS TABLE  table surface (left-right): 550 mm  table surface (front-back): 450 mmSLIDE  slide force: 45 to  table surface (left-right): 550 mm  table surface (front-back): 360 mm  stroke: 50 mm  stroke rate (max.): 400 /minSLIDE (MECHAN. PRESS)  slide adjustment: 50 mm  stroke min.: 10 mm  stroke max.: 50 mm  stroke rate (min.): 80 /min  stroke rate (max.): 400 /minTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 305 mmGrid 2016 Completely Overhauled

CONTROLS  CNC controls TECHNICAL SPECIFICATION  Case size: 860 mm  .. x: 620 mm  Adjustment of  x-axis: 350 mm  Adjustment of  y-axis: 250 mm  Erosion stroke: 350 mm  Max. dist. table-electr.clamp.surf.: 520 mmELECTRICAL SPECIFICATIONS  mains power supply: 8.3 kVA  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2700 mm  space requirements -front/back-: 1900 mm  total height: 2600 mm  total weight approx.: 3000 kgDescription- Work container can be lowered- C axis for rotation, indexing and erosion- AGIEVISION control incl. TECTRON, AGIESETUP 2D- USER SEQUENCE, SPACETRACK, AGIEPATH with GEOEDITOR- Electrode changer 28 times- Incl. EROWA pneumatic chuck

CONTROLS  PLC SIEMENS S7 300 FEEDSTOCK TUBE  external diameter min.: 20 mm  external diameter max.: 70 mm  wall thickness min.: 1 mm  wall thickness max.: 6.5 mmMACHINE CHARACTERISTICS SWAGING  force: 630 kN  stroke rate (max.): 630 /minELECTRICAL SPECIFICATIONS  total power consumption: 40 kWTube pointing machine HAGINGER AHM 63 with slide feeder S- Material: Steel tubes with a strength of 800 N/sqmm- Max. forming force: 4 x 630 kN- Drive motor power: 30 kW

CHARACTERISTICS HEAT TREATMENT EQUIPMENT  temperature max.: 950 °CClear width 2,200 mm Usable width 2,070 mm Usable height 400 mm Working height 1,300 mmInlet roller conveyor 14,700 mm Inlet box 2,500 mm Annealing furnace 29,169 mm (Annealing furnace clear length) approx. 26,769 mm Cooling section (HT and NT) 51,000 mm Outlet box 2,500 mm Outfeed roller conveyor 14,660 mm Total length 114,530 mm(annealing furnace and cooling section)N2 purge gas volume 420 m3Furnace design: Roller hearth continuous furnaceMaterial: TubesOuter diameter: 14 - 180 mmWall thickness: 0.8 – 8.0 mmLength: 4.0 – 13.0 mSurface before annealing: --Throughput at 920 °C annealing material temperatureThroughput at 700 °C annealing material temperatureReference pipes: 25 x 2.5 x 8000 mm33 x 3.5 x 8000 mm40 x 3.5 x 8000 mm55 x 2.8 x 8000 mm63 x 4 x 8000 mm75 x 6 x 8000 mm110 x 8 x 8000 mmTube outlet temp.,depe ...

CONTROLS  electronic controls DIMENSIONS / WEIGHTS  space requirements -left/right-: 4900 mm  space requirements -front/back-: 600 mm  total height: 1200 mm  total weight approx.: 500 kgELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzClamping range: 3-25mmRod length: 3000mm

max. temperature: 800 Gradsize of opening: Durchmesser 430 mmdepth of chamber: 630 mmdimensions of the machine ca.: 2 x 1 x 1.6 mweight of the machine ca.: 530 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table-size: 500 x 380 mmOverall size: 1400 x 1500 x 1800 mmweight of the machine ca.: 500 kground table: 3-jaw chuck: diameter: 125 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 550 mmy-travel: 320 mmz-travel: 420 mmb-axis: -45 / +180 °c-axis: 360 ° 0Control: SIEMENS 840D SL spindle taper: A-50 spindle turning speed - stepless: 12000 U/mintools in tool magazin: 64 total power requirement: 36 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 3 x 5 x 3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring range X-axis: 330 mmmeasuring range Y-axis: 400 mmspindle taper: SK 40/50 dimensions of the machine ca.: 1080 x 660 x 1080 mmxmmxmmweight: 175 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

área de projeção: 510x350 mmtamanho da mesa: 300x170 mmcurso longitudinal: 200 mmcurso transversal: 50 mmmovimento vertical: 150 mmamplificação -dobra: 10/20/50/100 tensão: 220 Vdimensões da máquina ca.: 850x110x1800 mmpeso da máquina ca.: 310 kg

área de projeção: 510x350 mmtamanho da mesa: 300x170 mmcurso longitudinal: 200 mmcurso transversal: 50 mmmovimento vertical: 150 mmamplificação -dobra: 20 tensão: 220 Vdimensões da máquina ca.: 850x1100x1800 mmpeso da máquina ca.: 350 kg

comprimento: 1680 mmlargura: 780 mmaltura: 1250 mmpeso: 63 kg

largura de transmissão: 700 mmaltura de trabalho: 390 mm

comprimento: 2000 mmlargura: 800 mmaltura: 1250 mmpeso: 170 kg

temperatura máxima: 150-500 Dimensões do cesto Grad: 300x210x460 mmPotência total necessária: 2,6 kWpeso da máquina ca.: 80 kgdimensões da máquina ca.: 0.80x0.60x0.95 m

temperatura: 80/130 C0: 100 kgcapacidade de enchimento: 750 ldimensões do cesto: 670x480 mmnúmero: 25 potência total necessária: 43 kWpeso da máquina ca.: 890 kgdimensões da máquina ca.: 185x190x150 cm

temperatura máxima: 1150 tamanho gradde abertura: 250 x 160 mmprofundidade da câmara: 400 mmpeso da máquina ca.: 480 tdimensões da máquina ca.: 1.1 x 1.1 x 1.6 m

O Moinho de Seção foi comissionado em 2011, incluindo equipamentos mecânicos avançados de laminação, juntamente com sistemas elétricos e de automação utilizando tecnologia da marca Siemens. O laminador reutilizou uma pequena parte do equipamento do laminador anterior que ali se encontrava. Esses são os suportes do moinho de acabamento, o cisalhamento de alta velocidade antes do leito de resfriamento e o acabamento do cisalhamento a frio. Projetado para uma capacidade de produção de 600.000 toneladas por ano, o laminador pode processar tarugos, flores ou blanks de vigas em uma ampla mistura de vigas, seções e barras planas. Possui um forno de reaquecimento de feixe de caminhada de 120 tph, um moinho reversível de rutura (BDM), um moinho de inversão ultra-flexível de três suportes (UFR) e um moinho de acabamento contínuo de oito stands. A instalação está ainda equi ...

comprimento: 700 mmlargura: 700 mmaltura: 750 mm

1. Transportador de rolos - Comprimento: 6000mm - Largura da teia 395mm 2. Transportador de rolos - Comprimento: 4000mm - Largura da teia 395mm

Comprimento 5000mm Largura da teia 395mm

Automático. Ataque Transportador de rolos 4000 mm, à direita

Máquina de fenda Elmass para trilhos de cunha de 2,5-14mm. Graças à ferramenta guiada por furo, até mesmo chaves extralongas podem ser empurradas. Ferramentas para furos padrão de 6-50mm e larguras de sulco de 2,5-14mm estão disponíveis. Trilhas de cunha em buracos cegos também são possíveis. Várias esteiras de cunha graças à mesa rotativa de 400 mm são viáveis.