outras máquinas para trabalhar o metal usadas para venda (10,972)

ELECTRICAL SHEAR Inv. No. 12.900S1 Make BINSWANGER & KIENLE Model KPSG130 Serialnumber 2574 Capacity 3 mm x 1,300 mm Backgauge 450 mm Cutting angle 2°30' KW 3 Volts 380 hz 50 Auction-ID: A1-50718-31

Auction-ID: A1-50601-2

with accessories Auction-ID: A1-50060-61

chamber dimensions 600x600x900mm (horizontal); max batch weight 600kg; operating temperature; 400 – 1350°C; max. vacuum: 1 x 10⁻² mbar;max. overpressure: 6 bar (abs.); process gas: Nitrogen; heating zones: 1; casing cooling: 4 – 6 bar; cooling water consumption (max. 24°C): 580 l/min; emergency water supply: 70 l/min; vacuum pumps: 3 units (Alcatel); control system DEMIG Auction-ID: A1-50601-3

2024 calibrated Auction-ID: A1-50060-142

With table, maximum thickness: 2mm, motor power: 2.8 KW Auction-ID: A1-50060-8

max thickness: 1.5 mm, Auction-ID: A1-50060-7

Equipped with pneumatic pressure tank, extraction and lighting. Including 2x suspension file cabinet Auction-ID: A1-50060-89

To be visited under power after consultation Auction-ID: A7-50850-1

best. from continuous chain conveyor approx. 1,000 mm wide, manual feed station, 1 washing station approx. 1,000 mm, 2 rinsing stations each 1,000 mm, 1 drying station approx. 1,000 mm, 1 reject station, control, bottom drip pan, Technical data, Technical data Electrical connection 400 V, zero (0) and earth (PE), at 50 Hz Connection fuse max. 400 A depending on the laid supply cable Maximum current consumption approx. 250 A Maximum power consumption approx. 85.4 kW Washing zone Pump type Lowara SVI 1603/07S30T Electrical connection 400 V, zero (0) and earth (PE), at 50 Hz Tank capacity 1050l Pump motor power 3 kW Pump delivery 390 l/min Heating capacity 45 kW (5x9 kW) Flushing zone 1 Pump type Lowara SVI 1603/07S30T Electrical connection 400 V, zero (0) and earth (PE), at 50 Hz Tank capacity 1050l Pump motor power 3 kW Pump delivery 390 l/min Heating capacity 36 kW (4x9 kW) Flushing z ...

Rated power: 19 kVA; Rated current: 29 A; No-load voltage: 280 V; Output current adjustment: 30-120 A; Rated output voltage: 128 V; Max cutting thickness: 45 mm; Cyclic duration factor: 60%; Efficiency: 80%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact 6093 Auction-ID: A1-50865-352

Robust mechanical swing shears for precise straight cuts of metal sheets. The machine has a working length of 2,040 mm and is designed for processing steel sheets up to approx. 2.5 mm. Due to the solid machine construction with a dead weight of approx. 2,050 kg, the shears are suitable for use in workshops, metal construction and industrial production. Technical data: - Working length: approx. 2,040 mm - Cutting capacity steel: approx. 2.5 mm - Manufacturer's specs max. material thickness: up to 3 mm - Motor power: 5.5 kW - Operating voltage: 380 V - Frequency: 50 Hz - Current consumption: 12 A - Connection: 3-phase - Machine weight: approx. 2,050 kg - Mechanical swing shear design - Operation via footswitch - Several front material support arms - Backgauge available - Cutting area with lighting - Stable machine table for guiding the metal sheets The machine has a solid, classic con ...

Gripper device swivel, 1 pc. HAINZL Berts test bench 350 L / 200 MPa, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-482

PIPE CONNECTION APPROX. 140 MM, Auction-ID: A1-50766-430

WITH SCHUNK ROBOT MOUNT, Auction-ID: A1-50766-467

ONA – ONA-COMPACT-2 – EDM Machine ONA ONA-COMPACT-2 industrial machine tool, manufactured in 1990, for electrical discharge machining (EDM). This process allows conductive metal parts to be precisely machined by means of controlled electrical discharges. The machine is particularly suitable for the production of parts with complex geometries and for the manufacture of moulds, dies, tools and technical parts. Features: Manufacturer: ONA Model: ONA-COMPACT-2 Year of Manufacture: 1990 Type: EDM / EDM machine Process: EDM machining Materials: conductive materials Application: Molds, dies, tooling, and technical parts Use: industrial and professional Machine sold as is, with the elements, accessories and equipment visible in the photographs. The operating condition, performance and compliance of the equipment have not been verified. The precise technical characteristics must be checked ac ...

PLASMATREAT FG 5001 – Industrial Plasma Generator PLASMATREAT FG 5001 industrial plasma generator, designed for surface treatment applications using Openair-Plasma technology. This equipment is intended for cleaning, activation and surface preparation operations in order to improve their adhesion before various industrial processes. Its compact design makes it easy to integrate into a production line or an automated installation. Features: Brand: PLASMATREAT Model: FG 5001 Type: Industrial Plasma Generator Technology: Openair-Plasma Applications: cleaning, activation and surface treatment Use: industrial and professional Dimensions (L x W x H): 60 x 80 x 35 cm Weight: 55 kg Equipment sold as is. Auction-ID: A1-50714-4062

100 bar 10l/min max. 60 C 1.5Kw 212-240 Volt 2800 rpm rpm Auction-ID: A7-50868-52

STILCRAM ORM sheet metal bending cylinder 1070x110. 3-roller machine. Working length: approx. 1,070 mm.Maximum sheet thickness: 4 mm.Diameter of the upper roller: approx. 110 mm.Motor power: 2.2 kW. Electrical connection: 380 V.Year: 2022. Approximate dimensions (L x W x H): 2,250 x 800 x 1,100 mm.Approximate weight: 850 kg.The dimensions and weight indicated are approximate values and should be considered as a guideline. According to the information provided, the machine has very few hours of use and all maintenance has been carried out. According to the seller, the machine was in good working order as of 13/11/2024. Possibility of loading onto a truck by overhead crane available on the premises. Condition and content as shown in the photographs. Auction-ID: A7-49809-10

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094 Auction-ID: A1-50865-350

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-50865-334

Automated production plant for the production of carbon prepregs (1500 x 1500 mm), footprint 22,000 x 1,300 x 3,000 mm, energy supply 400 V 50 Hz max. 15 kW, compressed air 8 bar DN 8 mm, production system consisting of storage, gripping cutting unit, feed table and safety equipment, rejection belt The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-19

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095 Auction-ID: A1-50865-348

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-50865-335

TRUMPF EHT TruShear 5062 CNC shear. Condition: Pre-owned. Year of acquisition: 2010 (purchased new in December 2010). Cutting length: approx. 2,000 mm.Maximum sheet thickness: 5 mm.Equipped with automatic rear table with numerical control. Maximum strokes: approx. 26 strokes/min.Approximate reference dimensions (L x W x H): 3,070 x 4,080 x 1,900 mm.The dimensions and maximum number of strokes indicated are technical reference data of the model and should be considered indicative, not verified measurements of this unit. According to the information provided, the machine has been maintained. According to the seller, the machine was in good working order as of 13/11/2024. The data on the CE plate has been erased over time. Possibility of loading onto truck by overhead crane available on the premises. Condition and content as shown in the photographs. Auction-ID: A7-49809-11

WITH SCHUNK ROBOT MOUNT, Auction-ID: A1-50766-466

TRUMPF TruDisk 1000 (FD24) – 1,000 W Industrial Laser System TRUMPF TruDisk 1000 (FD24) industrial laser system with a nominal power of 1,000 W, accompanied by various control, focusing, vision, suction and cooling equipment. The system includes a programmable focusing optics TRUMPF 12-12-30-A32/11 (PFO), which allows the laser beam to be precisely directed and focused on the working area, as well as a TRUMPF TXG03c-K34 vision system with GigE color CCD camera. The plant also has a 10.4\" TRUMPF Multitouch Panel Computer, a TBH LN 265 suction and filtration unit and a KLH RL7/0TK cooling unit. Key features: Manufacturer: TRUMPF Laser Source: TruDisk 1000 (FD24) Rated power: 1,000 W PFO Optics: TRUMPF 12-12-30-A32/11 Vision system: TRUMPF TXG03c-K34 Camera: GigE color CCD Operator Interface: 10.4\" Multitouch Panel Computer Suction / filtration: TBH LN 265 Cooling: KLH RL7/0TK Documenta ...

PIPE CONNECTION APPROX. 140 MM, Auction-ID: A1-50766-429

Automated production plant for the production of carbon prepregs (1500 x 1500 mm), footprint 22,000 x 1,300 x 3,000 mm, energy supply 400 V 50 Hz max. 15 kW, compressed air 8 bar DN 8 mm, production system consisting of storage, gripping cutting unit, feed table and safety equipment, rejection belt The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-18

Auction-ID: A1-50750-877