outras máquinas para trabalhar o metal usadas para venda (10,890)

A deposit of €3000.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. ATTENTION: The lot includes the following works that must be carried out in this time order no later than 30 days from the award. The total removal of the goods and correct disposal of the remaining NON-FERROUS materials after removal. The complete floor cleaning of the respective indoor and outdoor area. Access to the site will be allowed only after the delivery of all the documentation necessary for safety on site, according to the regulations in force and the specific provisions of the seller. Liability insurance is required for any damages. Surplex will monitor the progress of the work to ensure that the deadlines are met. An advance payment will be required for surveillance co ...

Auction-ID: A1-48745-52

Panel dimensions: 2000 x 1500 x 300 mmincl. height gauge from the manufacturer MAHRType: DIGIMAHR Auction-ID: A7-49089-137

Auction-ID: A1-48745-74

Beam polarization: 100:1verticalNominal tube voltage at maximum tube current: 533 VFilling voltage at maximum tube current: 530Maximum tube current: 65 Aincluding matching componentsReference: CES - Lot 138 Auction-ID: A7-49056-149

Includes control cabinet, remote control, shelf trolley with accessories, workshop cabinet with accessories, plus others. Auction-ID: A1-48474-56

dimensions:: innen 1160 x 870 x 850 mmAir consumption: 400 - 800 l/min.air pressure: 3,4 - 8,0 barworkpiece weight: max. 150 kgtotal power requirement: 1,2 kWweight: 160 kgrange L-W-H: 1320 x 1200 x 1760 mmFurnishing:- Very large front flap that opens upwards- Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc.- Integrated suction system with exchangeable air filter- Jet gun without a finger trigger The air flow is controlled by a foot pedal- Four fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film- Switch for suction and cabin lighting Regulation of the working pressure via pressure regulator with manometer- Jet head (grain size 0.125 - 0.42 mm can be used)- Cross struts on the feet easy transport with the pallet truck- Container for blasting material- dust extraction- foot switch- Operating instruct ...

width of the strips: mmband length: mmband speed: m/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 barliter capacity: 2,71 m³ / minmotor speeds:: 3000 U/mindimensions: 1300 x 1000 x 1900 mmtotal power requirement: 18,5 kWweight of the machine ca.: 500 kgFeatures:- Focus Control 2.0 control system- Network pressure sensor- Belt-driven drive system- SoundproofedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 150x1750 mmspeed: 15/30 m/s: 83 dBengine output: 1,27/1,7 kWweight: 145 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmburner heads: 1 Control: CNC workpiece weight: 900 kgtraversing speed: 91 m/mindimensions of the machine ca.: 5562 x 2270 x 2388 mmLaser cutting machine with manual shuttle tableConfiguration1. BodorPower laser source 6 kW2. Bodor Genius laser cutting head with autofocus3. Bodor Thinker 3.0 control system4. Bed made of tenon and mortise structure5. Bodor servo motor and driver6. Nitrogen control valve7. Bodor Lightning perforation technology8. Automatic layout of residual material9. 21.5-inch monitor with touch function10. Automatic adjustment of cutting gas pressure11. Active anti-collision function12. Intelligent vibration protection13. Anti-burn mineral casting14. Bodor Mango® Ergonomic Remote Control15. Gas-saving nozzles with stable flow16. Intelligent maintenance reminder17. WIFI internet connection18. Water cooling19. Extraction system20.  ...

total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 430 mmtable width: 300 mmx-travel: 260 mmy-travel: 160 mmz-travel: 300 mmweight of the machine ca.: 0,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: mmx-travel: 1000 mmthroat: mmtable length: 1300 mmtable width: 300 mmtotal power requirement: 14 kWweight of the machine ca.: 3.2 trequired space: 2.9x3.1x2.7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 580 mmworking heigth: 580 mmair consumption: 400 - 800 l/minworking pressure: 3,4 - 8,0 barsuction capacity: 17,4 m³/htotal power requirement: 1,2 kWweight of the machine ca.: 115 kgdimensions of the machine ca.: 1225 x 935 x 1640 mmDescription- Suitable for various blasting materials, e.g., quartz, glass beads, plastic beads, etc.- Ideal for cleaning, derusting, or paint removal from all types of metal parts , e.g., engine parts, fittings, signs, housings, rims, hinges- High-quality latex work gloves are firmly attached to the housing- Optimal visibility and occupational safety during workpiece processing thanks to the viewing window with adhesive protective film- Dust-free working thanks to circumferential seals on the lid and door frame- Sturdy storage grid allows workpieces to be placed inside the cabin- With drain opening for changing the blasting material- Sucti ...

length: 2000 mmwidth: 1000 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

movement of X-axis: 500 mmmovement of Y-axis: 350 mmvert. movement Z-axis: 256 mmworkpiece weight max.: 800 kgweight of the machine ca.: 4.5 t: +/- 70 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: bis M 24 turning speeds: max. 280 U/minthread: M5 - M24 working area: 2050 Rmax.work height max.: 900 mmtable surface area: 700 x 900 mmoil volume: 100 lengine output: 3.0 kWweight - pallet system: 280 kgEquipment:- electro-hydraulic tapping machine- Large working range (max. radius 2050 mm) Smooth swivel movement, e.g. due to built-in gas pressure dampers- Mobile machine base frame Oil tank hydraulic unit integrated in the base frame Hydraulic pressure gauge- Vertical / horizontal thread cutting possible- Connection cable with 16A plug Special accessories included in the scope of delivery :- Tap quick-change inserts according to DIN 376. M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22- Infinitely variable speed adjustment incl. digital display- Minimum quantity lubrication (spray oiler/compressed air)- T-slot clamping table- Tapping head can be fixed with magnetic ...

workpiece length: 2000 mmmax. workpiece diameter: 400 mmmin. workpiece diameter: mmbore spindle turning speed range: 260-1850 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working range: 1.050 x 650 x 250 mmmax. workpiece weight: 400 (800) kgcontrol: Agievision AGIEmax. conicity: 30° / 100mm travel -x axis: 500 mmtravel -y axis: 350 mmtravel -z axis: 426 mmtravel U x V-axis: +/-70 / +/-70 mmrapid traverse X-axis: 3 m/minrapid traverse Y-axis: 3 m/minrapid traverse U-axis: 0,6 m/minrapid traverse V-axis: 0,6 m/minrapid traverse Z-axis: 0,6 m/minwire dia.: 0,2...0,33 mmtotal power requirement: 12,1 kVAweight of the machine ca.: 3,9 tdimensions of the machine ca.: 2,8 x 2,4 x 2,3 mDocuments: Wire Eroding MachineAGIE - Agiecut Progress 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: bis M 36 turning speeds: max. 150 U/minthread: M5 - M36 working area: 2050 Rmax.work height max.: 900 mmtable surface area: 700 x 900 mmoil volume: 100 lengine output: 4.0 kWweight - pallet system: 320 kgequipment:- electro-hydraulic tapping machine- Large working range (max. radius 2050 mm) Smooth swivel movement, e.g. due to built-in gas pressure dampers- Mobile machine base frame Oil tank hydraulic unit integrated in the base frame Hydraulic pressure gauge- Vertical / horizontal thread cutting possible- Connection cable with 16A plug Special accessories included in the scope of delivery :- Tap quick-change inserts according to DIN 376. M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22. M27 / M30 / M33 / M36- Infinitely variable speed adjustment incl. digital display- Minimum quantity lubrication (spray oiler/compressed air)- T-slot clamping table- Tapping head ca ...

working heigth: mm0: 1000x500 mmtotal power requirement: kWweight of the machine ca.: 1.3 trequired space: 2.6x1.51x2.575 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring range X-axis: 300 mmmeasuring range Y-axis: 290 mmmeasuring range Z-axis: 650 mmtool diameter: SK 50 mmNumber of revolutions: 30 U/minmax. workpiecediameter: 300 mmmax. workpiece length: 500 mmmax. workpiece weight: 40 kgaccuracy +/-: 0,002 mmfeeds:: Working speed: X/Y/Z: 80 mm/sdimensions of the machine ca.: 2,5 x 2,0 x 2,5 mweight of the machine ca.: 1,2 ttotal power requirement: 1 kVADocuments: Tool-PresetterWALTER - Heli ToolcheckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 36x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: / mmturning length: / mmworkpiece length: / mmDrum brakesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Includes storage case Auction-ID: A1-48786-171

diameter: div. number: 40x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 40x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 56x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.