outras máquinas para trabalhar o metal usadas para venda (10,981)

dressing device automatic: - dressing travel: ? mminfeed each handwheel rotation/division line: 0,05 mmtotal power requirement: - kWWeight: 40 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimension of workpiece: 2400 mmvoltage: 26,8 V: total power requirement: 26,8 kWweight of the machine ca.: 0,040 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Trimestre 1 Casa de fundição em segunda mão para produção de tarugos, incluindo sistema de filtração Mfc.: Gautschi, Mechatherm, Weishaupt, PEHAKA, FISONS, Dantherm Filtration GmbH Construído: Desconhecido A máquina tem um design muito robusto e continua a funcionar bem, pois tem sido sempre mantida com peças sobressalentes originais e especialistas qualificados. Fundição direta numa mesa vertical e fabricar tarugas de 6'' e 8''. Para fazer 9'', a ferramenta da tabela pode ser modificada. A roda vertical pode trabalhar com 9'' ao remaquinar e modificar a mesa de ferramentas. 1 Forno de fusão e inclinação GAUTSCHI, capacidade 20 t, queimadores de óleo combustível A fornalha tem uma máquina de carregamento de elevador para carregar a sucata do topo da fornalha Unidade de desgaseificação FILD da MECHATHERM England Tratamento e filtragem de azoto 1 Moldador verti ...

Travel X/Y/Z: 620mm/420mm/400mm, C-axis: 360°, workpiece clamping plate X/Y: 1000mm/600mm, working tank dimensions X/Y: 1070mm/670mm, max. liquid height: 400mm, max. table load: 1500kg, max. electrode weight: 50kg/250kg, pulse generator: EroForm 60A, filling volume: approx. 1200l, tool changer: disc changer, tool positions: 20. Machine dimensions X/Y/Z: approx. 2450mm/2550mm/2450mm, weight: approx. 4500kg, control: EXMF 10, generator hours: approx. 19300h. Documentation available. An on site inspection is possible.

Travel X/Y/Z: 450mm/350mm/400mm, travel U/V: approx. +/-70mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight without/with tank: 800kg/400kg, wire diameter range: 0.2mm-0.33mm, tank volume: approx. 750l. Machine dimensions X/Y/Z: approx. 2000mm/2300mm/2500mm, weight: approx. 4000kg, control: Agievision. Documentation available. An on site inspection is possible.

Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible.

Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection poss ...

Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure, External PC with contour management and Exprog software, Cooling unit for dielectric fluid, Automatic fire extinguishing system, Automatic central lubrication, Extraction system,, Measuring probe, Machine lamp, Workpiece carrier SK 40, Measuring mandrel SK 40, cutter outer diameter: Max. 320 mm, Shank tool diameter: 10-320 mm, Outer diameter disc-shaped tools: Max. 320 mm, Cutting length: max. 480 mm, X-axis travel: 500 mm, Tool weight: max. 20 kg, Y axis travel: 300 mm, Travel path W-axis: 200 mm, Machine space requirements: 2535 x 2200 x 2280 mm, A-axis rotation range: 360°, E-axis swivel range: 180°, Weight approx.: 4800 kg, Connected load: 5,4 kW, colour: grey RAL 7035/7043

Centro de Laser da Lasag AG TIPO: FLS 542 C Ano de fabricação: 2006 Existem 2 sistemas para cada um do centro laser (2x ótica, 2x fonte laser) Existem também os cabos de fibra ótica e os blocos transformadores para as fontes laser, bem como um sistema de controlo PC. A central foi desmontada e armazenada em pleno funcionamento no final de 2024.

Pressão final de compressão: 10 pe/bar Velocidade: 745 1/min Fluxo volumoso: 3455 dm³/min Potência do motor: 22 kW

Controlo: FANUC Distância de deslocação: X = 500, Y = 350 Z = 300 mm Carga máxima da mesa: 350 kg Dimensões: 3500 x 2400 x 2400 mm Peso: 3.000 kg

FOBA Vario RPD50 VS1109/048 - Windows XP Inglês / Alemão - 1.4GHz 512MB RAM - Fobagraf 441-01 - Câmera EMC / IMP - Novos LED's IMP - Radiador tipo P313 - 2013 – novos filtros - HF 40W - PK usado, ano de construção 2011, 1.3MB, 10.5 W sob a lente - Lente 420, unidade de deflexão Raylase SS 10 - Z - 170mm e eixo X 300mm - Gira-discos em modo pêndulo, - Partida via pedaleira, possível através de cortina de luz - Interno / FOBA PLC - Antepara = altura máxima do componente 150mm - Completamente limpo / com manutenção 19% IVA é mostrado, EXW, Comissionamento, instrução, treinamento possível mediante solicitação

A vertical internal broaching machine (broaching tower) Karl Klink with lift table and loading portal is available. Broaching force: 63kN, broaching stroke: 1000mm, spindle stroke: 400mm, broaching speed: 7.5m/min, return speed: 24m/min, stations: 1, table width: 500mm. Machine dimensions X/Y/Z: approx. 3700mm/3000mm/3200mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.

Cycle time: approx. 31s, machine dimensions X/Y/Z: approx. 2200mm/2400mm/2300mm, weight: approx. 1500kg, control: Siemens. An on-site inspection is possible.

A flat steel bending machine for the production of ZB frames is available. Pneumatic pressure: 8bar, hydraulic pressure: 100bar, weight: approx. 5000kg. An on-site inspection is possible.

Dimensions (L/W/H): 6400x1500x1780 mmTotal power requirement: 19 kWWeight: 1800 kgControl: Arbeits- und Platzersparnis, sicherer Betrieb.Kombinierbar mit einer Hochgeschwindigkeits-Vierseitenfräse zu einer effizienten, automatischen Produktionslinie.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shaft bottom/top: 30mm/30mm, max. round tube length: 48mm, max. round tube diameter: 3mm, max. flat bar dimensions X/Y: 50mm/10mm, max. square tube dimensions X/Y/Z: 40mm/30mm/3mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.

Extração de Fuchs KKFD101F com módulo silenciador e novos filtros (carvão ativado, HEPA, tapete filtrante e saco filtrante) sem garantia; EXW, ano de construção 11/99

Máquina EDM Makino DUO64 vintage 2011.

A Nabertherm circulating air chamber furnace is available. Connected load: 30kW, max. temperature: 650°C, volume: 500l, heating-up time: approx. 60min, internal dimensions X/Y/Z: 750mm/1000mm/750mm. Machine dimensions: approx. 1300mm/1900mm/1850mm, weight: approx. 750kg. Documentation available. On-site inspection possible.

Máquina de medição por coordenadas 3D Unidade de controle XM 1600 Faixa de medição na tabela 200 x 200 x 200 mm Faixa máxima de medição 2000 x 1200 x 1000 mm Precisão: +/- 7μm Repetibilidade: +/- 3μm

Máquina de fio EDM Charmilles Robofil 4030 SI BJ 2001

Two bench coiling machines by Blume & Redecker are available. 1) AM 100, year of manufacture: 1980, max. wire diameter: 3.75mm, winding length: 600mm, max. spool diameter: 340mm. 2) AM 150, wire diameter range: 0.16mm–13.2mm, spindle distance: 80mm, center height: 300mm, swing diameter: 600mm, max. speed: 1000rpm, turning diameter: 500mm. Machine dimensions: approx. 850mm/1900mm/1350mm. An on-site inspection is possible.

A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible.

A bar loading magazine FMB for long turning automatics is offered. Bar diameter (min./max.): 2mm-23mm, max. bar length: 4200mm, max. remnant length: 420mm, loading compartment length/magazine length: 235mm, compressed air connection: 0.6MPa (6bar). An on-site inspection is possible by appointment.

Máquina de gravação a laser FOBA G5 LP100 com portas basculantes - Unidade de gravação de casaco - Guia de eixo redondo da mesa transversal X/Y - Unidade de deflexão (TS10), montada na cabeça do laser, com lente padrão (f = 163 mm), Campo de etiquetagem aprox. 120 x 120 [mm] - Refrigerador de água/água - Eixo Z (com caixa de velocidades e servo-acionamento), curso de 500 mm - Guia de eixo redondo da mesa transversal X/Y Tampo de mesa 250 x 250 [mm] com suporte de batimento em aço, Distâncias de viagem 480 x 500 [mm], Carga máxima: 100 kg - - Controlo do eixo servo para todos os eixos Sistema operacional Windows XP Painel de controlo com monitor, teclado e rato Desenho ou modelo na classe 1 de proteção laser Dimensões (W/H/D) 1100 / 2200 / 2200 [mm] • Peso 800 kg • Sistema elétrico 3/N/PE AC 400V, +/- 10%, 50/60 Hz • Proteção IP54  ...

A vertical internal broaching machine Frömag is available. Broaching tools: 3, stroke: 800mm, pulling force: 60kN, connected load: 15kW. Machine dimensions X/Y/Z: approx. 1050mm/900mm/3800mm, control: Frömag Commander PP-10. An on-site inspection is possible.

Extração Lissmac Tipo: DD 3200 BJ 2014 para Máquinas de Rebarbação

CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production., Accessories:, Total enclosure, Software path management, Software P- System for peeling cutters,, Software shaft endmills (207/208), Software discoid tools face (221/222/223/224), Software profiled workpieces (233/234/239/240), Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263), Software discoid tools (264/265), Software shaft and jointing cutters (267/268/277/278), Software step tools (271), Software scoring saws (299), Software saws flat tooth (301), Software saws single sided with chamfer (302/303), Software saws alternate tooth (304), Software saws triple chip (309), Software saws flat top tooth (310), Software saws flat trapezoid tooth (311) ...

An external whirling unit ProCon for external machining of threads and rotationally symmetrical shapes is available. Installation height: 180mm, motor power: 7.5kW, through hole of hollow spindle: 160mm, tilt angle right/left: 28°/45°, speed: 1800rpm, angular resolution: 0.1°, cutting circles: SK70/SK90, cutting circle pockets SK70/SK90: 4(6)/8, cutting circle bore SK70/SK90: 100mm/120mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible.