outras máquinas para trabalhar o metal usadas para venda (11,432)

1 hydraulic double-column press (11), manufacturer: Exner, type EX100SBZR, built in 1988, power 42 kW, pressing force 1,000 kN, GG 11 Exner, type EX100SBZR, built in 1988, SN 10094, power 42 kW, pressing force 1,000 kN, GG 11,000 kg, overtravel 26 mm, table size approx. 900 x 1,100 mm, swivel chair, separate control panel, control system, manufacturer Siemens, touch panel, two-hand operation, manufacturer Sick, type XY2SB, front material feed, linear travel, approx. 1,000 mm Find more here - / Contact us at -

1 eccentric press, manufacturer Weingarten, type AR125, built in 1970, serial number 120526, pressing force 125 t, ram stroke 20 - 120 mm, ram adjustment 100 mm, sheet thickness max. 13 mm, two-hand operation, swivel chair Find more here - / Contact us at -

1 eccentric press (23), manufacturer Heilbronn, type EP50, built in 1986, pressure force 500 kN, stroke 8 - 100 mm, stroke rate 140/min, ram adjustment 50 mm, drive power 3 kW, GG 3,000 kg, two-hand operation, swivel chair Find more here - / Contact us at -

1 hydraulic double-column press, manufactured by Exner, type EX80SB, built in 1987, power 15 kW, pressing force 800 kN, GG 5,300 kg, overtravel 38 mm Find more here - / Contact us at -

1 hydraulic double-column press (5), manufactured by Exner, type EX40, built in 1982, , power 7.5 kW, pressing force 400 kN, GG 2,050 kg, overtravel 50 mm, two-hand operation, light barrier system, manufactured by Sick Find more here - / Contact us at -

1 hydraulic double-column press, manufacturer Exner, type EXSBR200F, built in 1996, power 50 kW, pressing force 2,000 kN, GG 16,000 kg, overtravel 42 mm, two-hand operation, light barrier system, manufacturer Sick, table size approx. 800 x 1,200 mm, swivel chair Find more here - / Contact us at -

table length: 175 mmtable width: 110 mmgrinding wheel diameter: 500 mmtotal power requirement: 1 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: PEAFFER Model: P160 H/I Power: 8 HP Voltage: 380 V Phase: 3 Frequency: 50 Hz Find more here - / Contact us at -

CNC vertical machining center Type: VF-9 D/40 HE Manufacturer: HAAS Year: 2006 Control: Haas X: 2134 mm Y: 1016 mm Z: 762 mm Table: 2134 x 914 mm Max table load: 1814 kg Max spindle speed: 10000 rpm Through spindle cooling Machine weight: 12837 kg In good condition, fully functional, under power Find more here - / Contact us at -

Manufacturer: HAEUSLER Model: HPR 330 V+H Year of Manufacture: 2007 Approximately 10 pallets of tools for round bar processing are included, with diameters of 60.5, 137, 91, 168, 76, 51, 152, 129, etc. Condition : Machine currently not in use and therefore not fully assembled Technical Data: - Maximum bending moment (at 240 N/mm² yield strength): 200–330 cm³ - Number of bending rolls: 3 - Roll arrangement: asymmetric / symmetric - Roll diameter: 520 mm - Driven rolls: all 3 - Roll drive: hydraulic - Working speed: 0–7 m/min, stepless - Speed compensation between upper and lower rolls: automatic - Roll rotation reversal: electro-hydraulic - Adjustable bending rolls: 2 - Adjustment of bending rolls: hydraulic - Roll position display: digital, 0.1 mm accuracy - Roll bearings: roller bearings - Number of pressure roller systems: 2 - Adjustment of pressure roller systems: hydraul ...

Manufacturer: AGIE Model: FUTURA V 1PM Electrical Specifications: - Voltage: 400 V - Frequency: 50/60 Hz - Phase: 3 PH - Circuit Breaker Power: 17 kVA - Power Factor (Cos φ): — - Full Load Current: 15 A - Full Load Power: 3.9 kVA - Amp Rating of Largest Motor/Load: 3.4 A - Overcurrent Protection: 20 A @ 480 V ~, 18000 AIC Weight: 265 kg Condition and Maintenance: Last service performed at the end of 2021 (running hours: 9107). The machine has been used only a few hundred hours since. Overall in good condition. Find more here - / Contact us at -

amount: 1 STKTool holderThese chucks are designed for high-speed machining.These are precision tools from the Italian company DAndreaThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Thielenhaus Model: MicroStar 284 Year of Manufacture: 2020 ( unit 1 ) 2018 ( unit 2) Power Supply: 3-phase (3~) Frequency: 50 Hz Operating Voltage: 400 V Rated Current: 48 A Control Voltage: 230 V / 24 VDC Main Fuse Rating: 63 A Certification: CE Find more here - / Contact us at -

max. wheel diameter: 600 mmgear width: 500 mmmax. module: 15 min. module: 1 total power requirement: 2 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2x1,5x2 mThe rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles availab ...

Manufacturer: Tox Pressotechnik Model: MAG 075.222.A.001 Year of Manufacture: 2008 Condition : Excellent Min./Max. Air Pressure: 0.3 / 0.5 MPa ; 3 / 5 bar Max. Press Force at Max. Air Pressure: 680 kN Total Stroke: 100 mm Power Stroke: 11 mm Machine Weight (without tool): 3420 kg Find more here - / Contact us at -

Manufacturer: Matec Model: 30 HV Year of Manufacture: 1997 Type of Machine : 5-axis CNC vertical machining center - Well-maintained condition. - Working area: X = 2000 mm, Y = 600 mm, Z = 800 mm. - Equipped with rotary table Ø310 mm. - Swivel head with 1° Hirth toothing. - Heidenhain TNC426 control unit. - SK40 spindle with 12000 rpm. - Tool magazine with 24 positions. - Vacuum clamping plate dimensions: L = 1250 mm, W = 630 mm, with 8x8 mm grid and 5 mm groove. - Side opening for inserting long parts. Find more here - / Contact us at -