outras máquinas para trabalhar o metal usadas para venda (10,972)

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-50866-335

max. wheel diameter:275 mmgear width:58 mmmax. module:8 min. module:0,5 weight of the machine ca.:10 tmax. number of teeth:200 min. number of teeth:5

Manufacturer: Jean PerrotType: MK.2006Year: 1981Vehicle number: 8971018Release date: 10/03/1981Equipment: electrically adjustable rear gauge, digital position display, on/off controls, cutting control, worktable with sheet metal supportsWidth displayed on order: 369.5 mmRemarks: Pre-owned condition with visible traces of oxidation. Auction-ID: A1-50671-59

Auction-ID: A3-46142-11372

length:12192 mmwidth:2438 mmheight:2896 mmweight:4580 kgTotal weight:34000 kgcharge:29420 kgCooling ContainerInternal dimensions:Length 11585mmWidth 2290mmHeight 2545mmPallet spaces 23

plate thickness: mmsheet width: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m

weight of the machine ca.:11,2 tone spindle

tube diameter:40-90 mmwall strength:20 mmweight of the machine ca.:11 tdimensions of the machine ca.:4 x 1,6 x 1,35 mbending radius max.:270 mmThis machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure valve  ...

USED SINICO TR60/4 CUT-OFF MACHINEEquipped with1 Bar feeder bar of 6 metersDimensions and weightMachine: 5100x2350xH2400 - Tray: 1300x700 - Cabinet: 4000x700xH1800mm - Conveyor: 4200x1650xH1700mm - Bar feeder: 6900x1220xH1900mm - Weight: 10200kg Auction-ID: A1-50950-70

screw size:60 mmclosing pressure:3500 kNtotal power requirement:193 kWweight of the machine ca.:25,5 tdimensions of the machine ca.:7,65 x 3,65 x 3,95 m

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-50866-334

diameter:210 mmweight of the machine ca.:0,05 tturning speeds:4200 Bore:75 mmclamping diameter:254 mmdimensions of the machine ca.:0,6 x 0,5 x 0,4 m2-jaw power operating chuck with draw pipe and various jaw sets.

3D shape measuring station for Mahr MarForm MFU 200 Aspheric 3D aspheric optics. Manufacturer: Mahr GmbH (Göttingen, DE) – machine no. 9000920 (+ module 5440560) – serial no. 1124 – year 2018. Mahr ServiceCenter calibration 2026 (certificate no. 20260217), next maintenance scheduled for 2027. Accessories: Windows 10 PC, MarWin 13 software, Decenter/Tilt option, calibration set, Ø15 sphere, quick clamping, hydraulic chuck Ø25, 2 cases, manual + CD. Not included: workpiece carrier tray (Xonox, Thorlabs, etc.). Power supply 230 V – 1,800 VA. Weight: 4,573 kg. Specialized dismantling and metrology transport required. Given the technical nature of the machines, the dismantling and loading of the batches is the responsibility of the buyer. Auction-ID: A1-51054-1

Auction-ID: A3-46142-11376

bore capacity in steel (diameter):12 mmthroat:300 mmbore stroke:80 mmtotal power requirement:1,5 kWweight of the machine ca.:1,2 tdimensions of the machine ca.:0,6 x 0,7 x 2,1 mAppr. 100 year old column boring machine, complete overhould and ready to operate- swivel table, base table- taper tool chuck- base motor with drive belt to overhead spindle

length:1600 mmwidth:1000 mmplate height:200 mmweight of the machine ca.:1 tdimensions of the machine ca.:1,6 x 1,0 x 1,3 mHardstone measuring plate with support desk and 2 tailstocks

working area:2500 mmFree moveable 6-axis measuring device- operating software- W-Lan- ball tracer

Basket size LxWxH:600 mmMax. basket weight:80 kgNo. of washing chambers:1 Temperature for washing water:60 °CElectrical heating power:4 kWtotal power requirement:5 kWLoading:Höhe bis 300 tank capacity:50 lCapacity:60 l/minMachine size LxWxH:0,75 x 1,0 x 1,2 mStainless steel high pressure cleaning machine for industrial use with basket diameter 600 mmWorkpieces will be cleaned with hot water, cleaning compound and high pressure in turnable baskets- pneumatic spring supported machine lit- stainless steel driven basket- spraying bars and pump stainless steel design- loading basket with Jog function

Fatigue testing machine max. bending moment: ±12Nm alternating max. bending moment: 24Nm swelling, 3 different measuring springs are available, test frequency: 23Hz Waisted flat sample possible in three different variants Optical measuring device, preload and load amplitude adjustable via travel Auction-ID: A1-51071-12

x-travel:650 mmy-travel:450 mmz-travel:420 mmcontrol:MAKINO Hyper i U-axis:± 75 mmV-axis:± 75 mmmax. size of workpiece LxWxH:1000 x 800 x 400 mmworkpiece weight:max. 1500 kgTable dimensions:910 x 710 mmweight of the machine ca.:5 tDimensions (L/W/H):3 x 3 x 2,3 mmMemory:10 GB Wire EDM in good condition.

bore capacity in steel (diameter):40 mmarm length:1250 mmworkpiece height max.:1390 mmDist. spindle nose & working surface base:350 - 1260 Spindle travel:315 max. boring diameter:40 mmDistance between spindle axis and column:350 - 1260 spindle taper:4 MKRange of spindle speeds:22,4 - 2800 Number of spindle speeds:16 Number of spindle feeds:16 Table:500 x 630 Travel of spindle head:900 mmtotal power requirement:3,5 kWdimensions of the machine ca.:2150x1070x2840 mfeed:0,09 - 1,5 m/minweight of the machine ca.:3 t

x-travel:1000 mmy-travel:600 mmz-travel:550 mmfixed clamping table:1200 x 600 mmspindle drive motor:9 kWspindle taper ISO:40 spindle turning speed range:10 - 5000 U/minfeed range:2 - 6000 mm/mintotal power requirement:15 kWweight of the machine ca.:6 t

faceplate diameter:4000 mmswing diameter:4300 mmturning height:2500 mmmax. workpiece weight:63 ttotal power requirement:125 kWweight of the machine ca.:134 tdimensions:6100x10400x8400 mmUsed Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

Pressure:175 tchamfer lenght:4100 mmdistance between columns:3600 mmcolumn arm:410 mmram stroke speed:180 mm/secreturn speed:135 mm/secworking speed:10 mm/secwork stroke:275 mmoil volume:200 ldayligth:550 mmtable height:900 mmtable width:90 mmtotal power requirement:15 kWweight of the machine ca.:12000 kgdimensions of the machine ca.:5100 x 2150 x 2850 mm

Auction-ID: A3-46142-11375

Servo-Hydraulic Testing Machine Machine for dynamic and static tensile / compressive testing of materials and components Max. static and dynamic swelling load: ±100 kN Max. dynamically changing load: ±80 kN, max. piston travel: 100mm, frequencies: 0 to 20 Hz possible ZD_Kegelkopf, ZD_Kegelkopf_kurz6, ZD_Kegelkopf_kurz8, 4PB_Balken Integrated hydraulic power unit Control: Instron Fast Track 8800 100kN version Instruction manual included Enclosed disks: Console 8, WaveMatrix, National Instruments NI-488.2 (GPIB driver) With defect, cannot be started. Auction-ID: A1-51071-9

Technical description :- RAPID ACTION DOOR - Height = 2000mm- Width = 1800mm

Technical description :- RAPID ACTION DOOR - Height = 2000mm- Width = 2000mm

DIMENSIONS / WEIGHTS:. - total height:1000 mm