outras máquinas para trabalhar o metal usadas para venda (10,972)

must be demoted yourself lifting bridge and forklift is available and can be used machine is in working condition Auction-ID: A3-46142-11479

number of spindles:6 spindle passage:18 mmturning length:63/50 mmweight of the machine ca.:4,5 tspindle drive motor:11 kW

Electromechanical recirculating bending testing machine Machine for determining flexural fatigue strength max. bending moment of 27 Nm with a specimen diameter of 6.74 mm, frequency: from 0 to 120 Hz 200 Hz possible, trapezoidal torque curve between the bearings The blue boxes in the background are not one of them. The control cabinet pictured belongs to this auction and can control up to two of these recirculating bending machines. However, there is only one PUNZ up for auction Auction-ID: A1-51071-18

measuring range X-axis:500 mmmeasuring range Y-axis: mmTable dimensions: mmmeasurement range Z =:1000 mmtool diameter:max. 380 mmtool taper:HSK 100 compressed air:4-6 bardimensions:2,1 x 1 x 2,3 mmachine weight ab.:380 kg

Only the instrument itself, the associated folder and the enclosed five sample holders are part of the auction. The last calibration certificate from 27.05.2025 is also enclosed. Auction-ID: A1-51071-27

Rated power: 19 kVA; Rated current: 29 A; No-load voltage: 280 V; Output current adjustment: 30-120 A; Rated output voltage: 128 V; Max cutting thickness: 45 mm; Cyclic duration factor: 60%; Efficiency: 80%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact 6093 Auction-ID: A1-50866-352

- Electromagnetic resonance testing machine, Amsler - High-frequency pulsator - Max. one-sided tensile compressive load: 20 kN Max. alternating load: ±10 kN, max. travel: ±1.2mm, frequency range: depending on the stiffness of the structure and the number of additional weights between 35 and 240 Hz - Round specimens with threaded heads, flat specimens, bending specimens - Static pre-force adjustable by hand. Device for 4-point bending in pull/compression direction available Electromagnetic resonance test bench from Amsler with control unit from RUMUL. Unfortunately, the control unit cannot be switched on. With concrete cube as building decoupling, weight 2t. The specified dimensions are device incl. foundation cube. Auction-ID: A1-51071-10

sheet width:3050 mmplate thickness:4 mmtotal power requirement:9 kWweight of the machine ca.:6 tdimensions of the machine ca.:3900 x H 1850 x T 2100 mm

USED ESCOFIER M6 NET ROLLING MACHINEPower: 6 TonsDiving workDimensions and weightEuro pallet: 1200x800xH2000mm - weight 300kg Auction-ID: A1-50950-12

Large-format CNC die-sinking EDM machine AEG ELOTHERM P1 in heavy-duty industrial design with solid casting machine bed and gantry design. The machine is particularly suitable for tool and mould making as well as for machining large workpieces and dies. Travel distances X 992 mm, Y 807 mm and Z 561 mm. Pool dimensions approx. 1260 × 1060 × 550 mm. Operating hours according to the display approx. 72,180 h. Equipment: · Original ELO/AEG CNC control with digital display · Separate control panel with keypad and control console · Heavy work table with T-slots · Electrode holder on the Z-axis · Multiple filter system with several filter containers · Dielectric system with pump units · Integrated CO₂ extinguishing system · Servo Driven Axes · Large work basin for large-format workpieces Notes: · Age-related signs of wear present · Visible contamination in the area of the auxili ...

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095 Auction-ID: A1-50866-348

Fatigue testing machine max. bending moment: ±12Nm alternating max. bending moment: 24Nm swelling, 3 different measuring springs are available, test frequency: 23Hz Waisted flat sample possible in three different variants Optical measuring device, preload and load amplitude can only be adjusted via travel Auction-ID: A1-51071-13

Incl. accessories consisting of: e.g. various buttons Clamping plate (red) Control panel Control cabinet, dimensions (LxWxH) approx: 800x800x850 mm 1 desk, dimensions (LxWxH) approx: 1120x800x850 mm 1 office swivel chair 2 computers HP workstation b2699 1 monitor FUJITSU 1 HP keyboard 1 HP printer Auction-ID: A1-50373-12

grinding diameter:3 - 150 mmgrinding length:200 mmtotal power requirement:380V, 50Hz, 30 kWdimensions of the machine ca.:5 x 3 x 2,5 m

Microstrip light projector, for topography measurement Part of the offer is only what is written on the blue car, but WITHOUT the car itself: - MicroCAD measuring device with complete cable set - PC with accessories and user supplies - Granite slab - Calibration body set - Cold light source with light guide - Detailed operating instructions Technical Highlights & Features • Precise cutting edge measurement: Specialized optics for exact determination of radii (fillets) and wear. • Automatic determination of cutting edge radii up to approx. 5 μm. • Statistical validation: Determination of the average radius from several hundred sections, including a pass/bad rating. • High-resolution sensor technology: Area-based measurement with up to 5 million measuring points per scan. • Vertical resolution from 0.1 μm, lateral resolution from 0.4 μm. • Speed: Full 3D capture i ...

grinding diameter: 0,2 - 190 mmgrinding length:400 mmcentre height:100 mmweight of the machine ca.:1,6 tdimensions of the machine ca.:2 x 1,5 x 1,8 m

x-travel: 620 mmy-travel: 350 mmz-travel: 400 mmtable surface area: 820 x 420 mmMaximum weight on the table: 300 kgmilling head -swivable +/-: 90 °Speed range - 2 levels: 0 - 4.500 U/minfeed speeds: 0 - 2.000 mm/minrapid traverse: 5.000 m/mintotal power requirement: 7 kWweight of the machine ca.: 1,65 tdimensions of the machine ca.: 2,25 x 1,9 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

passage width:500 mmworking heigth:150 mmtotal power requirement:250 kWdimensions of the machine ca.:10 x 3 x 3 mheating capacity:2 x 50 + 2 x 33 =166 kWdrying plant - electrically heated:2 units: 40 + 53 KW cleaning pump:in gesamt ca. 20 kW1 Markert Cleantec continuous surface cleaning machine, year of manufacture: 2003 Continuous length approx. 7,000 mm with division into washing zones, rinsing zone, and blow-off system with associated transport system with 2 x 90° curved elements with chain drive with electric control for transporting wire mesh baskets, primarily 400 x 600 mm with associated control cabinet for controlling the timed material flow Machine no.: 932

valve dimensional inspection

indexing:Länge =< 1050 mmtable::Teilungslänge =

Fatigue testing machine max. bending moment: ±12Nm alternating max. bending moment: 24Nm swelling, 3 different measuring springs are available, test frequency: 23Hz Waisted flat sample possible in three different variants Optical measuring device, preload and load amplitude adjustable via travel Auction-ID: A1-51071-14

pulling force - max.:80 ttotal wight:26 tdimensions of the machine ca.:49 m² mtotal power requirement:85 kWworking stroke:250 mm

pulling force - max.:100 ttotal power requirement:87 kWweight of the machine ca.:51 tdimensions of the machine ca.:95 m² mworking stroke:2750 mmmax. helix angle:+/- 30 °Working stroke: 2750 mm

weight of the machine ca.:3,5 t

diameter:500 mmworkpiece weight:30 kgtest dia. min.:200 mmtotal power requirement:0,03 kWweight of the machine ca.:1000 kgdimensions of the machine ca.:1x0,5x1,06 m

measuring range X-axis:-50 . 530/830/1030 mmmeasurement range Z =:605/805/1005 mmtool taper:30 & 40 VDIcompressed air:6 bardimensions:2200 x 1200 x 2100 mmachine weight ab.:900 kgVertical Toolsetter with Cutting Edge detection via Camera System.Operating over CNC Control yb PC System or Manually, 3 axes, CNCEquipped with Modular Prescision Spindle with CNC Rotary Axis. Digital Glas Scale in all Axisand Linear Roller bearing in all Axis of the Slide Carriage.Electronic measuring equipment:PC electronics with intelligent KELCH EasyVision image processing17" TFT colour monitorOptional: second 17" TFT monitor for full screen measuring windowThe CNC Toolsetter is in good condition and ready for immediate use.

Box Width:750 Box Height:1000 dimensions of the machine ca.:1200 m2Powder Coating Line EISEMANN very less used and in very good condition. New Price of the plant 2.600.000,- EUROPower & Free conveyor system with 250 car trains, 5-Zone Spray Pre-Treatment System, stainless steel - water drying cooling zones.2 nos.of WAGNER stainless steel powder cabins each with ABB robots & double-automatic powder guns, as well aseach cabin is equipped with a hand-powder device.Powder Curing Oven, direct gas heated three-zoneSpray cleaning equipment, Stainless Steel - Sewage Treatment Plant, Evaporator with Reverse Osmosis System & Fresh-Air Device.Opening Cross Section Areal: Width 750 mm, Height 1000 mmTechnical Details: Pretreatment conveying speed 2.3 m / min.Pretreatment surface area approx. 200 m2 / h.Painting Surface approx. 120 m2 / h.Throughput of workpieces approx. 4,000 kThis Poweder Coatin ...

length:1000 mmwidth:800 mmheight:1050 mmweight:200 kgSchubladenschrank mit 5 AuszügenMit AMF Spannsystem Elementen

measuring range X-axis:150- 300 mmmeasuring range Y-axis: mmTable dimensions: mmmeasurement range Z =:450 mmenlargement:20 X fine adjustment:+/- 5 mmcompressed air:6 bardimensions:2 x 1,5 x2 mmachine weight ab.:150 kg