tornos usadas para venda (3,111)

Altura da ponta: 250 mm Largura central: 2000 mm Ø circunferencial: sobre a cama 500 mm Furo do eixo: 50,8 mm Suporte do eixo: tamanho 6 Pick-up cone tailstock: 5 MK Velocidades do eixo: 22 - 2000 rpm Alimentação: longitudinal/plana 0,05-6,4/0,025-3,2 mm/rev Intervalos de rosca: 80 - 1 mm Conexão elétrica: 380 V, 5,5 kW Requisito de espaço: 3600 x 1100 x 1500 mm Peso: 1875 kg

faceplate diameter: 1800 mmswing diameter: 2000 mmturning height: 1500 mmControl: SIEMENS 840 D workpiece weight max.: 5000 kgram head dimension: 250 x 250 mmtable turning speeds: 1 - 320 U/minpower capacity - table: 100 kWTorque: 31784 Nm0: 218 kwweight of the machine ca.: 55 tDimensions:- Turning diameter on the faceplate 2000 mm- Faceplate diameter 1800 mm- Turning height with turning head L100 1500 mmPower on the ram:- Clamping force of tool holder or accessories 120,000 N- Max. Feed force Z and X axis 30,000 N- Drive power of the milling, drilling and grinding spindle 37 kW- Speeds for turning 10 - 3000 rpmTravels:- Axis X, horizontal support on the crossbeam -2270/+2275 mm- Axis Z, vertical support on crossbeam 1250 mm- Axis C, table rotation 360°Feed speeds:- Axis X 15,000 mm/min- Axis Z 15,000 mm/min- Axis C 3.25 rpmCoolant system:- Coolant ...

faceplate diameter: 3200 mmswing diameter: 5100 mmturning height: 2505 mmcross rail - adjustment: 1500 mmmax. ram stroke: 1250 mmslide adjustment: 2000 mmcontrol: Siemens 8 T tool changer: 16 STK table load: 60 tfaceplate turning speed range -stepless-: 0,8-100 U/minfeed: 0,0 1-1000 mm/minrapid traverse: 6000 mm/mindrive of main spindle: 75 kWweight of the machine ca.: 70 tdimensions of the machine ca.: 9,3 x 6,1 x 6,0 mmachine is in an excellent conditionwith div. acessories (photos available)machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 45 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0350 mm: 196 mm: 0650 mm: 170 mm: 42 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 45 mm: 2,25/3,25 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0460 mm: 1500 mm: : 230 mm: 78 mm: 400 mm: 2200 U/min : D1-8 DIN 55029 : 95 mm: 145 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm: 210 mm: 0635 mm: 167 mm: 40 mm: 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1000 mm: 190 mm: 54 mm: 5,5 kW

: 0400 mm: 1250 mm: : 200 mm: 55 mm: 315 mm: 2700 U/min : D1-6 DIN 55029 : 73 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 1,3 x 0,65 x 0,6 mlongitudinal feed.3-jaw chuck 125 mm.4-way steel holder.chip tray, bulkheadHardened bed tracks.Emergency stop switch.lining protectionTool box, instruction manual.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 290 mmturning diameter over slide rest: 170 mmturning length: 750 mmturning speeds: 75 - 2000 U/mincentre height: 145 mmspindle bore: 38 mmtailstock quill taper MT: 3 MKtailstock quill stroke: 80 mmconnected load frequency: 230 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,34 tdimensions of the machine ca.: 1,3 x 0,75 x 0,7 mLongitudinal and transverse feed.3-jaw chuck 160 mm.4-jaw chuck 160 mm.faceplate4-way steel holder with 4 pcs tool holders2 pcs. bezelsMachine lightDrip trayHardened bed tracks.Emergency stop switch.Feed protectionSet of wheels.Machine tools.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mmturning diameter over slide rest: 220 mmturning length: 1000 mmturning diameter in the gap: 380 mmturning speeds: 70 - 2000 U/mincentre height: 180 mmspindle bore: 50 mmtailstock quill taper MT: 3 MKconnected load frequency: 230 oder 400 Vtotal power requirement: 1,8 kWweight of the machine ca.: 0.65 tdimensions of the machine ca.: 2,0 x 0,8 x 1,56 mProfessional industrial machine3-axis digital display3-jaw chuck 180 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotating4-fold steel holder.Halogen machine lightMachine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 420 mmturning length: 1250 mmcontrol: INDEX, C 200-4 D swing diameter: 630 mmtravel x1: 320 mmtravel z1: 1250 mmtravel x2: 170 mmtravel z2: 1250 mmtravel x3: 320 mmtravel z3: 1250 mmmain spindle speed: max. 3000 U/minmain spindle drive: 53 kWspindle passage: 102 mmspindle head: DIN 55026 Gr. 11 max. torque on the spindle: 675 Nmsub spindle - spindle speed range: max. 3000 U/minsub spindle drive: 53 kWsub spindle - spindle passage: 102 sub spindle - spindle head: DIN 55026 Gr. 11 sub spindle - spindle torque: 675 Nmtravel sub spindle: 1250 mmfeed power: X1 14000/Z1 14000 Nrapid traverse: X1 20/Z1 40 m/minfeed power: X2 8600/Z2 14000 Nrapid traverse: X2 20/Z2 40 m/minfeed power: X3 14000/Z3 14000 Nrapid traverse: X3 20/Z3 40 m/minnumbers of turret head positions: Rev. 1 = 12 numbers of turret head positions: Rev. 2 = 10 numbers of turret head positions: Rev. 3 = 12 n ...

turning diameter: 500 mmturning length: 1500 mmcontrol: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mmspindle bore: 70 mmspindle turning speed range: 3 - 2800 U/minspindle power: 15 kWmax. torque on the spindle: 1530 Nmspindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 Nrapid travel - longitudinal/face: 10 / 5 m/minbed width: 360 mmtravel of cross-slide: 265 mmupper slide travel: 140 mmturning tool - shaft cross cut: 32 x 25 mmtailstock quill diameter: 80 mmtailstock quill stroke: 160 mmtailstock taper MT: 5 total power requirement: kWweight of the machine ca.: 3,3 tdimensions of machine L x W x H: 3,45 x 1,65 x 1,93 mAccessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mmturning diameter over slide rest: 240 mmturning length: 1000 mmcentre height: 205 mmcentre distance: 1000 mmspindle bore: 47 mmspindle turning speed range: 28 - 1250 U/minfeeds - longitudinal: 0,03 - 8,8 mm/Ufeeds - cross: 0,006 - 1,84 mm/Uthread - mm pitch: 0,25 - 76 mmthread - inch: 1/2 - 152 Gg/thread - module: 0,25 - 22 mmbed width: 320 mmtailstock quill diameter: 55 mmtailstock taper MT: 4 face slide travel: 290 mmupper slide travel: 120 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,3 tdimensions of machine L x W x H: 2,32 x 1,15 x 1,22 mAccessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head with 2 inserts, solid steady, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Altura central: 400 mm Largura central: 1250/1300 mm Ø circunferencial: sobre a cama 440 mm Furo do eixo: Suporte do fuso: Pick-up cone tailstock: 5 MK Velocidades do eixo: 11,2 - 2240 rpm Alimentação: longitudinal/plana 0.1-2.8/0.05-1.4 mm/rev Pitches de tópicos: Conexão elétrica: 380 V, 11 kW Requisito de espaço: 3400 x 1400 x 1300/1700 mm Peso: aprox. 2700 kg

Altura central: 300 mm Largura central: 1000 mm Ø circunferencial: sobre a cama 610 mm Furo do eixo: 71 mm Suporte do eixo: tamanho 8 Pick-up cone tailstock: 5 MK Velocidades do eixo: aprox. 11,2 - 1800 rpm Alimentação: longitudinal/plana 0.014-16/0.063-7 mm/rev Inclinações de rosca: 0.1 - 112 mm Conexão elétrica: 380 V, aprox. 5,5 kW Requisito de espaço: 2900 x 1450 x 1750 mm

swing dia.: 440 mmmax. turning diameter: 220 mmturning length: 450 mmtravel -x axis: 200 mmcontrol: Fanuc 18i-TB max. helix angle: 60 °spindle bore: 64 mmtool taper: VDI 30 numbers of positions in the tool changer: 12 CNC Lathe | COLCHESTER - TORNADO T6MSequipped with counter spindle and chip conveyor.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar material dia.: 75 mmmax. max. swing dia.: 540 mmturning length: 650 mmcontrol: FANUC Oi-TB machine weight ab.: 6.200 kgCNC Turning- and Milling Center | JOHNFORD - SL-50-CF-Yequipped with chip conveyor.Additional equipment:+ C axis+ Y axis+ driven toolsThe machine is in good condition.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: SL 50 | SL50 | SL-50 CF Y | SL50 CF YThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Controle Siemens Sinumerik 840D Passagem da barra 65 mm Velocidades 5.000 min-1 2 x revólver de 12 velocidades com revólver acoplado Concorrência. Torreta 1 com eixo Y Instalação de recolha de peças Sistema de filtro de correia Transportador Revista de carregamento de barras IRCO Profimat

turning diameter: 250 mmturning length: 510 mmcontrol: Fanuc I Series total power requirement: 12 kWweight of the machine ca.: 4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diâmetro de giro sobre a cama: 32 mmfaixa de velocidade de giro do eixo: 8000 U/minpassagem do eixo: mmcomprimento de giro: 320 mmControlo: Fanuc 0i-TC necessidade de potência total: kWpeso da máquina ca.: 3,5 tdimensões da máquina ca.: 2,63 x 1,3 x 1,8 m

Digitais Diâmetro de giro 120 mm Comprimento de giro 700 mm Velocidade do eixo 2000 min-1 Tailstock

Controle Fanuc Série 20-T Diâmetro de giro 330 mm Diâmetro da barra 42 mm Comprimento de giro 650 mm Velocidades 5.000 min-1 Revólver de 8 velocidades Lubrificação em quantidade mínima

pequena construção fina com 3 RPMs no sentido horário e 3 RPMs no sentido anti-horário

Suporte para haste de perfuração com haste de perfuração, D = 50 mm, comprimento 650 mm . . Suporte de aço de retração, CFG .

diâmetro de giro: 254 mmcomprimento de giro: 600 mmcontrole: Seicos necessidade de potência total: 15 kWpeso da máquina ca.: 5,6 tdimensões da máquina ca.: 2,5 x 1,3 x 1,87 m

Key data: 2 mm, 10 mm

Descrição KRAMATORSK Torno pesado CNC 1 K 671 320 F3 Detalhes Tipo 1 K 671 320 F3 Ano de construção 1988 (comissionado pela primeira vez em 1998) Comprimento de giro 10.000 mm Diâmetro de giro sobre leito 2.000 mm (modificado) Diâmetro da placa facial 1.950 mm Faixa de fixação da placa facial 400 - 1.350 mm Velocidades 1,00 - 140 rpm. Binário 125.000 Nm Força de corte principal 130 kN máx. O tailstock pode ser girado automaticamente peso máximo da peça: 70 a peso máximo da peça com repouso estável de 100 a Potência de acionamento 100 kW Número de faixas de cama 4 Dimensões 22.000 x 6.200 x 2.900 mm Controlo CNC SIEMENS 840D (2010 por 220.000,00 €) Alimentação de suporte X-Z 0.3 - 4.000 mm/min. Suporta travessia rápida X-Z 4.000 mm/min. Dimensões cone interno 140 x 1 ...

: 0330 mm: 1000 mm: : 167 mm: 40 mm: 3000 U/min : DIN 55029 D1-4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.