tornos usadas para venda (3,111)

Key data: 1160 mm

Torno CNC vertical potente da HYUNDAI WIA Ano de construção: 2013 Guia Manual FANUC 32i Diâmetro máximo de rotação 1.160 mm Diâmetro máximo do swing 1.355 mm Potência do fuso principal até 60 kW Torque máximo 6.490 Nm Eixo C com resolução de 0,001° Torre de ferramentas BMT85P de 12 velocidades 12 estações de ferramentas elétricas Renishaw Q-Setter Monitorização de Falhas de Ferramentas Hyundai WIA Sistema de líquido de arrefecimento de 20 bar Transportador de cavacos com fita articulada Mandril de 800 mm de 3 mandíbulas Seoam CAS 32

Horizontal turning machine manufactured in 2014. This SEIGER SLZ 500E features a center distance of 1500 mm and a swing diameter over the bed of 500 mm. It is equipped with a powerful main drive of 20/25 kW and a maximum spindle torque of approximately 1400 Nm. If you are looking to get high-quality turning capabilities, consider the SEIGER SLZ 500E machine we have for sale. Contact us for further details regarding this machine.

Center height: 225mm, distance between centers: 1000mm, swing over bed/cross slide: 450mm/260mm, spindle bore: 65mm, max. spindle speed: 3000rpm, max. feed rate: 10m/min, tool turret: 4, main motor power: 7.5kW, control: Fanuc 0i Mate TC. Machine dimensions X/Y/Z: approx. 3500mm/1500mm/1700mm, weight: approx. 1550kg, operating hours: approx. 27000h, feed hours: approx. 1329h. Documentation available. An on-site inspection is possible.

Torno PPL 200-225 - Diâmetro de viragem sobre a cama: 400-450 mm - Diâmetro de rotação sobre o ferrolho: 235-285 mm - Deslocamento com a ponte: diâmetro de rotação 600-650 mm - Diâmetro da placa frontal: 350 mm - Largura da cama: 320 mm - Potência do motor: 5,5 cv - Carro da ferramenta: curso de 150 mm Em bom estado, totalmente funcional, pode ser visto e experimentado no local. Envio também para o estrangeiro. Visualização: Basicamente, gostaria de salientar que o artigo pode ser consultado e testado sob energia antes da compra, para excluir mal-entendidos. Por favor, faça perguntas antes de comprar para evitar confusões. Se tiver alguma dúvida geral ou quiser marcar uma visita para uma visita, pode ser contactado a qualquer momento através do número de telefone abaixo ou acima. Exceto erros na descrição e na venda anterior. O IVA é mostrado ...

Torno CNC Fabricante: Gildemeister Tipo: CTX 410 V3 Máquina nº: 0136004581 Ano de fabricação: 2006 Controlo: Siemens 840D ShopTurn Diâmetro circunferencial: 505 mm Diâmetro do mandil: 210 Passagem do eixo: 65 mm Potência de transmissão: 40/100% ED 21/28 KW Intervalo de velocidade de – até: 25-5000 Dimensões aproximadas: 4300x2000x1800 Peso aproximado: 5600 Kg - Revólver de 12 velocidades - VDI 40 - Eixo C - Ferramentas elétricas 12 estações - Maquinação de barras de encapsulamento - Transportadores de cavacos - Contramão - SMW Autoblok 210BB - Porta-ferramentas acionados 3x axiais - Porta-ferramentas acionados 2x radiais - Vários outros suportes de ferramentas - Novo motor para revólver Exceto erros

Torno CNC Fabricante: Gildemeister Tipo: CTX 420 Linear V4 Máquina n.º: 02260005181 Ano de fabricação: 2005 Controlo: Siemens 840D ShopTurn Diâmetro circunferencial: 680 Diâmetro do mandil: 250 Potência de tração: 40/100% DE: 37/25 KW Intervalo de velocidade de – até: 20-5000 rpm Peso aprox.: 6500 Kg - Revólver de 12 velocidades - VDI 40 - Eixo C - Eixo Y - Ferramentas elétricas 12 estações - Transportadores de cavacos - Contramão - SMW Autoblok 250 BH Exceto erros

Torno CNC Fabricante: Gildemeister Tipo: CTX 310 Locomotiva n.º: 8042942713C Ano de Fabricação: 2008 Controlo: Heidenhain IT Diâmetro circunferencial: 500 mm Passagem do fuso: 65 Potência de tração: 40/100% ED: 16/12 KW Intervalo de velocidade de – até: 25-6000 rpm Peso aprox.: 3500 Kg - Revólver de 12 velocidades - VDI 30 - Transportadores de cavacos - Eixo C - Ferramentas elétricas 12 estações - Maquinação de barras de encapsulamento - LNS QuickLoad Servo 3, carregador curto - Contramão - Hainbuch ToplusMini Axzug 65 Exceto erros

An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement.

Horizontal turning machine manufactured in 1997. This BOEHRINGER DUC 560/2000 features a maximum turning diameter of 570 mm and a turning length of 2000 mm. It includes an 8-position disc turret and a three-jaw chuck with a diameter of 200 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER DUC 560/2000 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2007. This KEY EAST BV-40160 features a swing over bed of 1,010 mm and a distance between centers of 4,000 mm. It includes a front and rear chuck diameter of 500 mm, along with a digital readout for enhanced precision. If you are looking to get high-quality turning capabilities, consider the KEY EAST BV-40160 machine we have for sale. Contact us for further details.

Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible.

Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible.

Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine.

Horizontal turning machine manufactured in 2001. This EMCO EMCOMAT 200X1000 features a turning length of 1,000 mm and a maximum turning diameter over bed of 400 mm. It is equipped with a Fagor 8055 CNC control unit and includes a SMW AUTOBLOCK wedge-type chuck and a Multifix quick-change tool holder. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOMAT 200X1000 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1999. This Gildemeister CTX400 Serie2 features a maximum turning diameter of 420 mm and a distance between centers of 600 mm. It includes a disc turret with 12 tool stations and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX400 Serie2 machine we have for sale. Contact us for further details.

This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details.

Distance between centers: 2000mm, control: Siemens Sinumerik 810, the controls flash memory is currently probably defective, but the parameters can still be accessed. an on-site inspection is possible.

A Buffalo CNC lathe in need of repair is offered for sale. Center height: 200mm, distance between centers: 880mm, chuck diameter: 160mm, swing over bed: 410mm, swing over cross slide: 230mm, bed width: 260mm, spindle bore: 46mm, spindle nose: A2-5, max. spindle speed: 5000rpm, X-axis travel: 190mm, Z-axis travel: 855mm, rapid traverse: 12m/min, tailstock quill diameter: 58mm, tailstock quill travel: 140mm, tailstock quill taper: MT4, control: Fagor 8055 TC. Accessories included. Dimensions X/Y/Z: approx. 2286mm/1800mm/2230mm, weight: approx. 2350kg. The feed motor of the spindle drive is defective. An on-site inspection is possible.

Max. turning diameter: 1000mm, max. swing diameter: 1250mm, max. workpiece diameter: 1000mm, max. workpiece length: 850mm, max. workpiece weight: 1000kg, X/Z travel: 1250mm/1000mm, max. speed: 900rpm, feed rate: 14m/min, rapid traverse: 20m/min, spindle nose: DIN 55026 short taper size A15, tool interface: DIN 69880 VDI60 tool holder, spindle diameter at the front bearing: 240mm, control: Siemens Sinumerik 840D. Machine weight: approx. 25t, space requirement: 85m². Equipment: SMW IN-D 1000 chuck, chip conveyor. The machine has no driven tools. Documentation available. Inspection possible by appointment.

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible.

Vários suportes de troca rápida / suportes de troca rápida / acessórios no total 42 PCs: 7 peças WDL 4/50 16 WDR 4/40 10 peças WDL 4/40 3 peças WB 4/60⌀ 3 unidades. WBW 4/60⌀ 1 pcs. WBW 23/60⌀ 2 peças sem tipo Por favor, diga-nos quais os artigos que lhe interessam para receber uma oferta. Teremos todo o gosto em fornecer-lhe mais fotografias.

Aqui temos uma Weiler DZ 65, torre de popa Duplomatic de 16 dobras, 2 fusos, cabeça de colete para ambos os fusos, ferramenta acionada em todos os pontos de rotação, Transportador de aparos, refrigerante através de 2 fusos, ejetor de mola do segundo fuso, ligação ao alimentador de hastes, remoção de peças via bandeja de gotejamento, correia transportadora de peças, vários tubos de inserção de fuso, transportador de aparos, alimentação de material Irco Profimat 3m,

Lathe Colchester Bantam VS 3500

Lathe Gildemeister NEF 320 K BJ 2002

Lathe Gildemeister CT 60 BJ 1990

Centro de Viragem Vertical de Dois Fusos - Controlo Siemens 840 D - Cama de máquina VSC 400 Duo - 2 x torre de disco de 12 x diâmetro 40 mm, acionada - 2 x estações adicionais de perfuração e aterramento - Sistema aberto de transporte de peças - Unidade de transferência e torneio - Interface com um sistema de tratamento externo - Alimentação central de arrefecimento para bomba de alta pressão 70 bar - Soprar o dispositivo de captação e os dispositivos de fixação - Medição da peça de trabalho - Monitorização de ferramentas - Opção de rede Emag - Gestão de ferramentas irmãs Diâmetro circunferencial 260 mm X-travel 860 mm Z-curso 200 mm Fuso principal 2 velocidade máxima até 4500 1/min Espaçamento do fuso 1055 mm Main Drive 2 Motor AC Assíncrono 6ß/100% ED 39/28 KW Torque máximo 460 Nm Travessia rápida x/ z 45/ 30 m/min

Diâmetro da barra: 8 mm a 65 mm (material redondo) Comprimento da cana (33L): aproximadamente 3,3 metros Tipo de máquina: Cabeça fixa de fuso (tornos automáticos) Tipo de carregador: Carregador MP (múltiplos carregadores)

A Hitachi Seiki CNC turning center in need of repair is offered for sale. Max. turning diameter: approx. 255mm, max. turning length: approx. 380mm, X/Z travel: 200mm/400mm, spindle speed: up to approx. 3600rpm, spindle motor power: 11kW, bar capacity: approx. 64mm, spindle bore: approx. 78mm, chuck size: approx. 255mm, tool turret: 10/12-station, tailstock taper: MT5, control: SEICOS-L MULTI, version V3R5.G. Weight: approx. 4300kg. A tool holder on the chuck is broken. An on-site inspection is possible.

Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max.  ...