tornos usadas para venda (3,123)

turning diameter over bed: 420 mmturning diameter over slide rest: 290 mmturning length: 900 mmturning diameter in the gap: mmturning speeds: 40 - 2000 U/mincentre height: 210 mmspindle bore: 38 mmtotal power requirement: 4,0 KWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 2,4 x 1,1 x 1,3 mLead and feed spindle lathe- 3-jaw chuck 220mm- Quick-change tool holder with 5 cassettes- Steady rest- Chip tray- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 570 mmturning length: 2000 mmcontrol: total power requirement: 15 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mmturning diameter over slide rest: 240 mmturning length: 1000 mmturning diameter in the gap: 530 mmturning speeds: 65 - 1810 U/mincentre height: 205 mmspindle bore: 52 mmtailstock quill taper MT: 4 total power requirement: 2,2 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,3 mCenter lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 264 mmturning length: 1000 mmturning diameter in the gap: 550 mmturning speeds: 44 - 2000 U/mincentre height: 200 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 1,5 / 2,4 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,56 m3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 320mmbezel fixedrunning bezel4-fold steel holder.Halogen machine lightmachine lightfoot brakeremovable chip tray, chip protection wallHardened and ground bed tracksComplete coolant systemlining protectionmachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Com dois módulos de usinagem, eixo X: -50 a 725mm, eixo Y: -200 a 300/ -250 a 250mm, travessia rápida X-, Y-, eixo Z: 18/12/30m/min, comprimentos de giro: 1500/2000/2500/3200/4000/4500/6500mm, diâmetro de oscilação: 780/ 880mm, furo do eixo de giro: 92/123mm, faixa de velocidade do eixo principal: 0-3000/0-3000/2000/min, máx. Velocidade da unidade de torneamento/fresagem: 5000/6000/10000/min, comprimento máximo da ferramenta: 900/600/1000/300/900mm, curso da pena: 160/170mm, carga conectada: 102kVA, sistema de controle: SINUMERIK ONE / SINUMERIK 840D sl, controle do sistema de acionamento: SINAMICS S120, peso: 17t. É possível uma inspeção no local.

Está disponível um torno paralelo Pinacho CNC de precisão. Altura do centro: 180mm, largura do centro: 750mm-1000mm, diâmetro de giro sobre a cama guia/escorregador longitudinal/escorregador transversal: 360mm/335mm/198mm, largura da cama: 250mm, furo: 42mm, velocidade: 4000rpm, alimentação X/Z: 10m/min, travessia rápida X/Z: 10m/min. Diâmetro da haste do tailstock: 58mm, comprimento da haste do tailstock: 200mm, cone Morse: MK3, curso mínimo do repouso estável fixo/móvel: 10mm, curso máximo do repouso estável fixo/móvel: 70mm/114mm, controle: Fanuc 0i. Documentação disponível. Inspeção no local é possível

Diâmetro de giro sobre a cama/face deslizante: 360mm/160mm, distância central: 800mm, curso X/Z: 205mm/810mm, velocidade: 3150rpm, furo do eixo: 60mm, posições da ferramenta: 8, travessia rápida X/Z: 10m/min. Dimensões da máquina X/Y/Z: aprox. 3300mm/1800mm/1800mm, peso: aprox. 3300kg, controle: Traub System TX-8. É possível uma inspeção no local.

turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmcenter height over bed: 125 mmcentre distance: 550 mmbed width: 135 mmspindle bore: 26 mmturning speed range - stepless: 50 - 2.000 U/minpower requirement: 750 W3-jaw-chuck diameter: 125 mmtaper in tailstock-quill: MK 2 dia. of quill: 30 mmquill stroke: 70 mmvoltage: 230 Vweight of the machine ca.: 120 kgdimensions of the machine ca.: 1,25 x 0,60 x 0,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpice diameter max.: 90 mmforward bearing diameter: 140 mmTurning speeds mainspindle: 4.200 U/minPower: 35,5 KWControl: INDEX C 200-4 travel -x axis: 1.500 mmtravel -z axis: 340 mmtravel -y axis: 180 mmb-axis: 360 °CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis.Further information:- direct measuring system on X + ZThe machine is in good condition.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: V-300 | V 300The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kW

Circulation/rotation Ø over bed: 475 mmRotation/rotation Ø via cross slide: 260 mmSledge path plan: 260 mmcentre distance: 1000 / 1500 / 2000 mmpower capacity: 22 kWGear stages. m= manual / e= electric.: 2 e Spindle head DIN 55026 / DIN 55027: A6 / 6 Spindle Ø in front bearing: 115 mmspindle bore: 78 / 70 mmturning speed range (V-constant): 1 - 3.000 U/minfeed range flat: 1µ - 1.000 mm/Ufeed range lengthwise and thread: 1µ - 2.000 mm/URapid traverse plan/longitudinal: 5 / 10 m/mindiameter of quill: 70 mmquill travel: 120 mmquill inner cone: 5 MKThis machine is used for the production of individual parts and small batches from simple to the most complex contours.It is characterised by:--> Ease of operation Precision Working range

: 0400 mm: 1250 mm: : 200 mm: 80 mm: 315 mm: 2700 U/min : D1-8 DIN 55029 : 73 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.666h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

altura central: 102 mmdistância central: 450 mmfuro do eixo: 25 mmvelocidade do eixo:: 220 - 2600 peso da máquina ca.: tdimensões da máquina ca.: mOs acessórios não foram verificados quanto à sua exaustividadeOs armários não estão incluídos no âmbito de fornecimento

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 6.944h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.650h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 280 mmturning length: 1000 mmturning diameter in the gap: mmturning speeds: 70 - 2000 U/mincentre height: 195 mmspindle bore: 54 mmtailstock quill taper MT: 3 MKconnected load frequency: 400 Vtotal power requirement: 2,2 kWweight of the machine ca.: 0.85 tdimensions of the machine ca.: 1,95 x 1,0 x 1,75 mProfessional industrial machine3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotating4-fold steel holder.Halogen machine lightMachine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 1,1 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,3 x 0,6 x 0,65 mBenchtop lathe 3-axis LCD digital display system fully assembled.Longitudinal feed.3-jaw chuck 125 mm.4-jaw chuck 125 mm.Clamping plate.4-way steel holder.Clock for thread cutting.Drip trayHardened bed tracks.Emergency stop switch.Forage protectionSet of wheels.Appropriate tools.Base cabinet is optionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 130 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 20 mmtailstock quill taper MT: 2 tailstock quill stroke: 60 mmmetric threading: 0,4 - 3,0 mmthread - inch: 10 - 44 TPIthread - module: 0,2 - 12,5 mmconnected load frequency: 230 Vtotal power requirement: 1,0 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 1,09 x 0,59 x 0,45 mEquipped with- 20 mm spindle passage- adjustable guideways- Powerful 1.0 kW motor- continuously variable speedScope of delivery:- 3-jaw chuck 100 mm,- 4-jaw faceplate chuck 125mm- standing and rotating bezel- Splash guard- Feed protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 25-90 mmthreading length: 3000 mmthread pitch: 2-16 mmtotal power requirement: 25 kWweight of the machine ca.: 10,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 250 mmturning length: 100 mmcontrol: SIEMENS 840 D total power requirement: 35 kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mE M A G (Germany)Vertical CNC Controlled Hard Turning and Grinding machinewith tool turret and workpiece handling SystemModel VSC 250 DS Year 2004 # M7 28.69324_______________________________________________________Turning Ø, max. 250 mmTurning length internal / external 100 mmWorkpiece length min./max. 29 – 100 mm6-positon tool turret Ø / swing-Ø 480/790 mmWorkpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mmFeed rate / Quick feed X/Z 45/30 m/min.Feed force X/Z  ...

turning diameter: 400 mmturning length: 915 mmcontrol: NUM Type 1062 T total power requirement: 12,5 kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mmturning length: 710 mmcontrol: SIEMENS SINUMERIC 840 total power requirement: 40 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mI N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstockand INDEX CNC Control C 200 – 4 (SIEMENS)Model G 300 Year 1995 S/N 5000 65_____________________________________________________________Turning - Ø, with chuck, max. 300 mmSpindle bore 90 mmMax. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mmTurret head slide cross movement (Z-Axis) max. 140 mmTurret with 12 tool holder positions DIN 30 mmFeed range of turret slide /  ...

turning diameter: 150 mmturning length: 500 mmcontrol: total power requirement: 4 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mmturning length: 400 mmcontrol: SIEMENS SINUMERIC 840 C total power requirement: 40 kWweight of the machine ca.: 6.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 125 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,135 tdimensions of the machine ca.: 1,25 x 0,6 x 0,6 mSpeed in 6 levels 125 - 2000rpm.3-jaw chuck 125 mm.4-jaw chuck 125 mm. (Independent)Fixed bezel.Revolving bezel.4-fold steel holder.chip tray.back panel.spindle protection.Hardened bed rails.Longitudinal feed with left / right switching.Set of change gears.Associated Tools.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mmturning diameter over slide rest: 200 mmturning length: 900 mmturning diameter in the gap: 320 mmturning speeds: 75 - 2000 U/mincentre height: 160 mmspindle bore: 38 mmtailstock quill taper MT: 3 connected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,6 x 0,75 x 1,7 mSINO digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 250mmbezel fixedQuick-change steel holder with 4 pcs. steel holdermachine lightChip tray, chip protection wallHardened and ground bed trackslining protectionmachine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Estamos a vender um centro de viragem Haas ST-20 em nome de um cliente. A máquina foi instalada e nunca utilizada de forma produtiva., - Opções de controlo, - pacote de opções, - fluxo de refrigerante de alta pressão, - pacote de acessórios

diâmetro de giro: 60 mmcomprimento de giro: 200 mmnúmero de lâminas: potência total necessária: 20 kWpeso da máquina ca.: tdimensões da máquina ca.: m

turning diameter: 1250 mmswing diameter: 1160 mmturning height: 800 mmfaceplate diameter: 1000 mmtotal power requirement: 97 kWweight of the machine ca.: 25000 tdimensions of the machine ca.: mP I T T L E R (Germany)CNC Controlled Vertical Turning and Milling CentreWith Tool Changer and Pallet ChangerModel PV 1250 / 1-1 Year 1994 _______________________________________________________Turning Ø max. 1,000 mmSwing Ø max. 1,160 mmTurning length 800 mmX Axis - horizontal 1,300 mmY Axis - vertical 800 mmFeed / quick feed 16,000 mm/minMain spindle speeds 10 - 1,000 rpm !Main spindle speeds via separate C Axis 0.1 - 16 rpmPositioning accuracy of C Axis 360° + / - 5 Tool holder ISO 50Tool drive 22 kWMax. torque / spindle speed 315 Nm / 2,500 rpmPallet size 630 x 630 mmSpindle drive  ...