tornos usadas para venda (3,103)

turning diameter: 360 mmturning length: 1000 mmswing diameter over bed slide: 360 mmcentre height: 180 mmturning speeds: 70-2400 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 680 kgdimensions of the machine ca.: 2000x1500x900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features:- Robust lead/feed screw lathe- RÖHM three-jaw chuck Ø 160 mm- Foldable lathe chuck guard- Chuck key- MULTIFIX steel holder A, with 3x new inserts- Movable tailstock- Swiveling machine light- Control panel, front left- Automatic feeds for face and upper support- Machine base, with cabinet door (storage space)- Chip splash guard rear panel- Emergency stop button- Operating instructionsThe data for this ad was created with M ...

turning diameter: 42 mmturning length: 250 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC-lathe with bar feedwith Sameca bar feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 250 mmturning length: 450 mmcontrol: TX8D bore: 80 mmspindle speed:: 3150 U/min.CNC Lathe with Bar Feed and 3 TurretsVery large spindle bore, with bar loading devicePlease ask for further details.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 190 mmturning length: 210 - 230 mmx-axis: 125 mmz-axis: 195 mmturning speed range: 6.000 U/mingreates pass round over bed: 190 - 200 mmspindle bore: 43 mmmachine weight ab.: 2.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 120 mmspindle bore: 20 mmcopying device: ja kWweight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 100 mmturning length: 100 mmMain Spindle:: spindle motor: 7,5 / 11 kWspindle passage: 42 mmcollet diameter: DIN 173E (A5) spindle turning speed range: 6000 U/minrapid traverse: 30 m/mintravel x / y / z: 300 / 770 / 250 mm2nd Spindle:: spindle motor: 2,2 / 3,75 kWspindle passage: 30 mmdia. of draw-in collets: DIN 173E (A5) mmspindle turning speed range: 6000 U/minrapid traverse: 30 m/mintravel x / y / z: 900 / 770 / 300 mmcontrol: Mitsubishi M830 tool taper: ER 20 total power requirement: kWweight of the machine ca.: 5,6 tdimensions of the machine ca.: 3,8 x 2,2 x 2 mSimultaneous machining on the main and counter spindles- Mitsubishi M830 CNC control with electronic handwheel- Main and counter spindles-- each with C- and Y-axes-- 173 E collet chuck (A5)- Swivel head (B-axis 0–360° in 0.001° increments) on the main and counter spindles- 36 tools (24 of which are dr ...

greates pass round over bed: 700 mmswing diameter over slide rest: 380 mmmax. turning diameter: 410 mmcontrol: HEIDENHAIN - 4290 max. Spindle speed: 5.000 U/min.centre distance: 975 mmtravel -x axis: 300 mmtravel -y axis: 120 (+/- 60) mmtravel -z axis: 850 mmnumbers of positions in the tool changer: 12 tool taper: VDI40 CNC Turning- and Milling Center | DMG - CTX 800 Beta equipped with a turret for driven tools, SCHUNK lathe chuck (Ø 315 mm) as well as tailstock and chip conveyor.An extensive tool package is in the Scope of delivery includes.The machine is in a well-maintained condition.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: CTX800beta | CTX800 beta | CTX-800The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmcontrol: FANUC Series 18i TB weight of the machine ca.: ~ 5.500 kgVertical Turning Machine | EMAG - VL 3 mLT with driven toolsThe machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL3 | VL3mLT | VL-3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmcontrol: FANUC Series 32i Model A weight of the machine ca.: ~ 5.500 kgVertical Turning Machine | EMAG - VL 3 + VL 3The machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL3 | VL-3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmcontrol: SIEMENS SINUMERIK 840D sl weight of the machine ca.: ~ 5.500 kgVertical Turning Machine | EMAG - VL 3 + VL 3 YThe machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL3 | VL-3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 36884 centre distance: 1000 mm: 520 mm weight of the machine ca.: 2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm: 210 mm: 1000 mm: 167 mm: 40 mm: 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 750 mmturning length: 3.500 mmturning length: Standard: 3.071 mmcontrol: Sinumerik 840 D SiemensWorking height: 1.300 mmaxis stroke:: x-travel: 435 mmz-travel: 3.071 mmmax. workpiece weight between centers: 2.000 kgMain spindle:: turning speed range - main spindle: 10 - 3.000 min/-1power capacity - main spindel: 61,2 / 195 kWmax. Torque: 779 Nmspindle head: A 11 DIN 55026spindle diameter in front bearing: 180 mmSubspindle:: Spindle speed range subspindle: 10 - 3.000 min/-1power capacity - Sub spindle: 73 / 233 kWmax. Torque: 932 Nmspindle head: A 11 DIN 55026spindle diameter in front bearing: 180 mmTurret 1:: U-axis: min. -5 - max. 430 mmw-axis: min. 276 - max. 3.347 mmtool taper: VDI 50 number of toolpositions: 12 pos.Number of driven toolspositions: 12 pos.Spindle speed - driven tool stations: max. 3.000 min -1power capacity - driven tool-stations: 9,7 kWTorq ...

turning diameter over bed: 350 mmturning diameter over slide rest: 216 mmturning length: 1000 mmturning diameter in the gap: 550 mmturning speeds: 40 - 1800 U/mincentre height: 170 mmspindle bore: 40 mmtotal power requirement: 4,0 KWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 2,0 x 0,85 x 1,6 mCentre lathe (lead screw and feed rod)- Digital readout- 3-jaw chuck (160 mm)- Spare jaws- Coolant system- Multifix tool post- 4 Multifix tool holders- Steady rest- Live centre- Chip tray- Chuck guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 390 mmturning length: 2250 mmcontrol: Sinumerik 840D swing diameter: 610 mmcross movement. (x-axis): 605 mmlongitudinal traverse (z-axis): 1.870 mmy-axis: 210 mmb-axis: 240 °Axial travel (X2) / Longitudinal travel (Z2): 267/1.840 mmLongitudinal travel (Z3): 1.840 mmmain spindle: - clamping chuck diameter: 250-315-400 mmbar material dia.: max 82 mmspindle head: Ø 220H5 spindle bore: Ø 118 mmClamping tube inner diameter: 82 mmDiameter in front bearing: 180 mmCounter spindle: - clamping chuck diameter: 250-315-400 mmbar material dia.: 92 mmspindle head: Ø 220H5 spindle bore: Ø 118 mmClamping tube inner diameter: 104 mmDiameter in front bearing: 180 mmMain spindle drives left and right: - power requirement: 45/47 kWspeed area: 20 - 3.200 1/minBuckling speed: 650 1/mintorque: 650/ 1.080 NmC-axis speed: 3.200 1/minTorque C-axis: 660 1/minPartial accuracy C-axis: 0,025 ° ...

turning diameter: - mmturning length: - mmswing diameter over bed slide: - mmtotal power requirement: - kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: - mmturning length: - mmswing diameter over bed slide: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 590 mmturning length: 1100 mmcontrol: Fanuc turning diameter over bed: 800 mmtotal power requirement: --- kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: 600 mmturning speeds: 22 - 1500 U/mincentre height: 230 mmspindle bore: mmtotal power requirement: 6,5 KWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,8 x 1,2 x 1,5 mCentre lathe- Forkardt F200 3-jaw chuck- Multifix quick-change tool post- Steady rest- Chip tray- Tailstock centreThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: FANUC 18i TB turning diameter: 280 mmturning length: 400 mmc-axis: indexing: 0.001 °turning speeds: -6000 U/mintool taper: DIN ASA A2-5 Top turret tool hodler:: 12 rapid traverse X-axis: 24 m/minrapid traverse Z-axis: 30 m/minOverall size: 5000 x 2000 x 2600 mmweight of the machine ca.: 6300 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: FANUC 0i TC turning diameter: 520 mmturning length: 1090 mmturning speeds: -3500 U/minTop turret tool hodler:: 12 rapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/minOverall size: 3000 x 1800 x 2000 mmweight of the machine ca.: 6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: FANUC 21i TB turning diameter: 355 mmturning length: 1330 mmc-axis: indexing: 0.001 °turning speeds: -2800 U/mintool taper: BMT 65 Top turret tool hodler:: 12 rapid traverse X-axis: 16 m/minrapid traverse Z-axis: 24 m/minOverall size: 4000 x 2000 x 2100 mmweight of the machine ca.: 6700 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: GE Fanuc Series 21i-T Distance between centres: 5000 mmcenter bore: 425 swing over bed: 850 mmbed width: 425 mmrapid feed: 10000 mm/minworking feed: 7000 mm/minmain spindle bore: 85 mmMain spindle: DIN 55027-n°8 taper: 5 spindle speeds: 0-2000 U/minSpindle power: 11 KWtailstock quill diameter: 96 mmtailstock travel: 215 mmweight of the machine ca.: 7 tdimensions of the machine ca.: 7.300x1.700x1.900 mSupport Guides 2Swing over cross carriage 560 mm.Automatic ranges 2Turret type AutomaticTurret positions 8Hydraulic tailstock quill stroke INCLUDEDTailstock taper MORSE 63 Jaw Auto-centering hydraulic chuck Ø 300 mm. INCLUDED4 support steady rest Ø 450 mm. INCLUDED3 support steady rest Ø 250 mm INCLUDEDChuck protection INCLUDEDComplete rear protection INCLUDEDDual handwheel for carriage control INCLUDEDFoot pedals for hydraulic chuck opera ...

turning diameter over bed: 1930 mmturning diameter over slide rest: 1520 mmturning length: 5000 mmturning speeds: 0,5-250 U/minspindle bore: 105 mmworkpiece weight: 35 tsteady: 400-700 mmsteady: 700-1200 mmsteady: 1000-1600 mmcontrol: Siemens total power requirement: 106 kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamTh ...

centre distance: 1000 mmturning diameter over bed: 420 mmturning diameter over bed slide: 235 turning length: 1000 mmspindle taper: DIN 55027 Gr. 6control: MANUALPlus 4110 spindle bore: 51 mmturning speed range: 3 - 3000 U/minfeed:: 5.000/10.000 mm / mindrive capacity - spindle motor: 11 kWtaper in tailstock-quill: MK 4 dia. of quill: 70 mmquill stroke: 110 mmcoolant: ja/yes voltage: 400 VNumber of working hours: 6.908 hweight of the machine ca.: 3 tdimensions of the machine ca.: 3,4 x 2 x 2,2 mBOEHRINGER DUS 400 ti CNC cycle-controlled lathe, built in 2006-Control system: Heidenhain ManualPlus 4110-11 kW AC main drive with 2-stage gearbox-Work area cover with chip guard door-Control panel mounted on the support, moves with the machine-Holding brake-Programmable cycles-4-position quick-change turret-Size 2 tool holder on fixed base-With 1 WD ‘/25’ tool holder-Tailstock-Rapid traverse ...

turning diameter: 65 mmturning length: 150 mmcontrol: Siemens 840D spindle passage: 75 mmturning length: 150 mmc-axis: 2x 0,001 °gripping station: 65 mmspeeds: 5000 U/minrapid traverse: 30 m/minturret (x-stations): 3x12 Number of axles: 10 St.number of toolholder-holes: 36 chip conveyor: ja / yes kWcoolant filtering unit: ja / yes kWNumber of working hours: 35000 htotal power requirement: 22 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 4,4 x 2 x 2,3 + Iemca mbar loader: Iemca Master 880 DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles,3 turrets with Iemca Master 880 loading magazineAccessories:a large number of tool holdersin total 104 off, 24 of them are driven tool holderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar material dia.: 32/38 mmspindle passage: 44 mmturning length: 320 mmturning speeds: 200-8000 U/minc-axis: 0,001 Gradgripping station: 32/38 mmturning length: 120 mmturning speeds: 200-8000 U/minc-axis: 0,001 0number of tools: 13 fixnumber of milling stations: 4+5 drivencontrol: Mitsubishi Meldas M70 Number of axles: 5+2 St.total power requirement: 7,5 kWweight of the machine ca.: 2850 kgdimensions of the machine ca.: 2,5 x 1,4 x 1,75 + FMB mbar loader: FMB turbo 3-36 fire distinguisher: Kraft & Bauer CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloaderFMB turbo 3-36equipped with swarf & coolant tank, fire distiguisher.ON/OFF 29.564h (status 24.03.2026)Running hours 26.607h (status 24.03.2026)GBL function (standard)LFV function: noThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mmturning length: 230 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFanuc controlat each spindle is a 3-jaw chuck mounted2x 12-fold revolverchip conveyorcoolant deviceTechnische Daten: / technical detailsSchwingdurchmesser / rotary diameter 500 mmmax. Drehdurchmesser / max. turning diameter 400 mmmax. Drehlänge / max. turning length 230 mmX-Weg / X-travel 220 mmZ-Weg / Z-travel 230 mmmax. Drehzahl der Spindeln / max. spindle speed of the spindles 2000 UpM /rpmAnzahl der Revolverplätze / number of tool places 2x 12 Eilgang x, z / rapid feed x, z 30, 30 m/minAntriebsleistung Spindeln / drive capacity spindles 18,5/15 kWGewicht ca. / weight ca. 9400 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, acces ...

turning diameter: 330 mmturning length: 669 mmcontrol: Sinumerik 828D total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 828D12-fold revolver Sauter VDI40driven toolsC-axis3-jaw chuckTool Eyepart catcherchip conveyortail stockcoolant device with high pressure pumpbar loading device IemcaTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 600 mmmax. Drehdurchmesser / max. turning diameter 330 mmmax. Drehlänge / max. turning length 669 mmX-Weg / X-travel 260 mmZ-Weg / Z-travel 762 mmDrehzahl / spindle speed 3400 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesmax. Stangendurchmesser / max. bar diameter 75 mmEilgang X / rapid feed X 20 m/minEilgang Z / rapid feed Z 24 m/min.Gewicht der Maschine ca. / weight ca. 5700 kgT ...