tornos usadas para venda (3,103)

greates pass round over bed: 350 mmswing diameter over face slide: 200 mmcentre distance: 800 mmcentre height: 175 mmturning length: 700 mm3-jaw chuck: Röhm Ø 160 spindle bore: 46 mmspindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/mintailstock quill taper MT: 3 weight of the machine ca.: 1000 kg3-axis digital readoutmanual includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0554 mm: 370 mm: 3000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: 570 mmturning speeds: 45 - 1800 U/mincentre height: 210 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 3,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,6 x 1,1 x 1,7 mProfessional industrial machinedigital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotatingMultifix steel holder.Machine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 2000 mmturning height: 1800 mmControl: Siemens Sinumerik 840 Dsl turning speeds range: 2,8-315 U/mincross rail adjustment - vertical: 1200 mmcross rail adjustment - horizontal: +/- 1150 mm: 1500 mmbit feeder section: 240 x 240 mmMinimum immersion diameter: 340 mmcutting capacity: 50 kNmax. torque on the faceplate: 50000 Nmspeed range step 1: 2,8 - 80 U/minspeed range step 2: 12 - 315 U/minMax. clamping weight: 12000 Kgpower capacity faceplate: 105 kWweight of the machine ca.: 33 tdimensions of the machine ca.: 10 x 5 x 6,5 mFurther technical data: - Feed range of three-phase servo motors: 1–3000 mm/min, 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/minFeatures/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyo ...

turning diameter over bed: 1420 mmturning diameter over slide rest: 1000 mmturning length: 15000 mmturning dia. in gap: 2050 mmspindle diameter: 160 mmspeed: 1 - 400 U/minfaceplate diameter: mmspindle motor: 30 kWtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- 4-jaw face plate- 4 Steady rest- 4-way toolpost- Rapid traverse- tailstock- Taper turning attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 280 mmturning diameter over slide rest: 170 mmturning length: 600 mmweight of the machine ca.: 400 kgspindle passage: 26 mmspeeds: 55-2000 U/mintotal power requirement: 1,4 kWdimensions of the machine ca.: 1,5 x 0,8x 1,3 mIncluding EMCO SOD grinding supportIncluding EMCO 4-jaw chuckIncluding machine feetIncluding change gearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3600 mmswing diameter: 4500 mmturning height: 1850 mmmax. workpiece weight: kgvertical adjustment of the crossrail: mmtravel -x axis: mmtravel -y axis: mmtravel -z axis: mmturning speed range: 0,6- 50 U/minpower capacity: kWmax. torque on the faceplate: weight of the machine ca.: 72 tdimensions: mverticale turning machine double coloumn - digital scale - double coloumn - 2x ram - movable cross slide - extra toolholder (four station) on the side of facing plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1500 mmturning length: 4500 (5500) mmcontrol: Siemens 840 Dsl max. workpiece weight between centres: 6000 kgtotal power requirement: kWweight of the machine ca.: 40 tdimensions of the machine ca.: mCNC machine configured as a 4-way center lathe with full travel over the steady rests and superstructuresZ-axis travel (longitudinal slide) = 5000 mm (6000 mm with TAE3)X-axis travel (transverse cross slide) = 1000 mmY-axis travel (vertical movement) = 350 mmMaximum workpiece diameter = 1500 mmSwing diameter over cross slide = 1500 mmCenter distance = 4500 mm (5500 mm with TAE3)The cross slide and cross slide do not restrict the diameter range due to their lateral positioning on the lathe bed. Therefore, there is no associated diameter restriction over the cross slide/tool carrier.The cross slide unit, including the cross slide superstructure, can travel completely past the ...

faceplate diameter: 4000 mmswing diameter: 4200 mmturning height: 2000 mmworkpiece weight: 50000 kgcross travel of ram-slide: 2300 mmslides vertical travel: 1250 mmswival range +/-: -15/+30 Gradfaceplate turning speed range: 0,5 - 55 U/minControl: Fagor 8055i CNC total power requirement: 182 kWweight of the machine ca.: 134 tdimensions of the machine ca.: 5920 x 10200 x 8400 mmMachine overhauled in 2008- CNC Control FAGOR 8055i- Tool C8- Chip ConveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 spindle passage: 36 mmturning length: 250 mmspindle bearing diameter: 358,2 mmbar material dia.: 36 mmbar length: 4000 mmlongitudinal slide -travel: 145 / 250 mmcross slide - travel: 80 mmspindle turning speed - stepless: 560 - 4000 U/minspindle motor: 28 kWTotal weight, approx.: 8500 kgdimensions of the machine ca.: 5850 x 1900 x 2580 mmxmmxmm- Beckhoff CNC control system (Win2000)- IEMCA 4m bar feeder (PRA52/P-Typ42)+ Hydraulic catch chute+ Mechanical end-piece chute with container+ Parts conveyor belt+ 3–4 bar oil connection+ 100 bar high-pressure connection+ 1 HYDAC hydraulic oil cooler+ 1 oil cooler for cutting oil+ 1 chip conveyor+ 1 magnetic roller for sludge removal+ 1 new air conditioning unit for control cabinet / year of manufacture 2025+ Feed block: new brass strips fitted in 2023, making the machine as good as new+ Spindle couplings 2nd, 4th and 6t ...

turning diameter: 320 mmturning length: 600 mmcontrol: Fanuc Oi-TD spindle bore diameter: 74 mmnumber of controlled axis: 2 turning speed range: 3000 U/minrapid speed: 20 m/minnumber of tapers in turret head: 12 direkttail stock: Ja power requirement: 15 kWweight: 5,0 tdimensions: 3,7 x 1,6 x 2,0 mUsed CNC- Lahte 2 axis- 3 jaw chuck Ø 250 mm- chip conveyor- oil dust collector- Tool presetterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1800 mmturning length: 600 mmcontrol: Siemens 6 - Jaw Chuck: ? spindle bore: 130 mmspindle nose: DIN 55027 Größe 11 turning speed range: 1 - 400 U/minmax. torque on the spindle: 9000 total power requirement: 38 / 52 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 6x3x2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 2000 mmgreates pass round over bed: 630 mmswing diameter over slide rest: 350 mmcontrol: Monforts Control System K bed width: 550 mmturning speed range: 2 - 1800 U/minspindle diameter in front bearing: 120 mmspindle head DIN 55027 - Size: 8 tool taper: RD2 PARATquill stroke: 210 mmspindle bore: 71 mmtotal power requirement: 30 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4,90 x 2,10 x 2,00 mThree-jaw chuck / key bar / Ø250mmFour-jaw chuck3-jaw chuck for tailstock4-station tool post head PARATFixed steady rest, Ø smallFixed steady rest, Ø largeVarious chuck jaws, live centers, live centers, tool holdersChip conveyor with coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 80 mmmax. turning diameter: 395 mmMax. Turning length: 750 mmcontrol: System TX 8H max. Spindle speed: 3.150 U/min.CNC lathe | TRAUB - TNA 400The machine is in a well-maintained condition.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:TNA400 | TNA-400The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 80 mmmax. turning diameter: 460 mmMax. Turning length: 1.000 mmcontrol: System TX 8F max. Spindle speed: 2.800 U/min.CNC lathe | TRAUB - TNA 500The machine is in a well-maintained condition.The machine videos from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:TNA500 | TNA-500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Fanuc 31/32 i : 2 chucking diameter: 170 mmswing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmlength: 2500 mmwidth: 1900 mmheight: 2300 mmweight: 5500 kgturning height: mmturning diameter: mmswing diameter: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1450 mmturning diameter over slide rest: 950 mmturning length: 4000 mmcentre height: 725 mmfaceplate diameter: 1000 mmtravel -x axis: 980 mmtravel -z axis: 4000 mmworkpiece weight: 2 toturning speed range: 1,5 - 1000 U/minspindle hollow: 500 mmControl: Siemens 828D total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- CNC Control Siemens 828D- Front and Rear 1000mm dia. 4 – chucks- Tailstock- Chip Conveyor- Boring Bar 1500 mm x 120 mm- Boring Bar 1690 mm x 120 mm- Boring Bar 1000 mm x 80 mm- Boring Bar 1500 mm x 100 mm - Quantity of KM ToolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm: 210 mm: 0635 mm: 167 mm: 40 mm: 2,2 kWspindle turning speed - stepless: 30-3000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 430 mmturning diameter over slide rest: 230 mmturning length: 1000 mmcentre height: 215 mmcentre distance: 1000 mmspindle bore: 56 mmspindle turning speed range: 19 - 2000 U/mintotal power requirement: 7,5 kWweight of the machine ca.: 1,9 tdimensions of machine L x W x H: 2,78 x 1,25 x 1,40 mAccessories: 3-jaw chuck 250 mmø, 4-pos. tool post, solid steadyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 530 mmturning diameter: 150 mmspindle passage: 65 mmcontrol: SIEMENS 840 C travel x1: 175 mmtravel y1: +/- 70 mmtravel z1: 433 mmtravel x2: 175 mmtravel y2: +/- 70 mmtravel z2: 433 mmspindle turning speed range: 38 - 4000 U/minC-axis: 2 x tool turret: 2 x 12 Pos.number of driven tool stations: 2 x 12 tool shaft (cylinder shaft DIN 69880): VDI 30 total power requirement: 33 kWdimensions of machine L x W x H: 3,95 x 2,49 x 2,6 mAccessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mmturning length: 1000 mmcontrol: FAGOR control: CNC 8055/B-T centre height: 200 mmcentre distance: 1000 mmturning dia. over face-slide: 210 mmbed width: 300 mmspindle bore: 65 mmspindle turning speed range: 0 - 3000 U/mintransmission ratio: 2 feeds - longitudinal: 0 - 10.000 mm/minfeeds - cross: 0 - 10.000 mm/minrapid travel - longitudinal/face: 15 m/mintailstock quill diameter: 68 mmtailstock quill stroke: 155 mmtailstock taper MT: 4 total power requirement: 8 kWweight of the machine ca.: tdimensions: 3,1 x 1,9 x 1,78 mAccessories: 3-jaw chuck 200 mmø, MULTIFIX-tool post with various inserts, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 220 mmturning length: 250 mmcontrol: SIEMENS SINUMERIK 820 T swing diameter: 380 mmchucking diameter: 250 mmx-travel: 200 mmz-travel: 250 mmspindle turning speed range: bis 4000 U/minrapid travel - longitudinal/face: 15 m/mintotal power requirement: 27,5 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,2 x 2,9 x 2,2 macc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 550 - 1100 mmclamping length: 1650 - 2400 mmguage width: 1435 mmmotor power: 60 (each Chuck) kwspindle turning speed range: 9 - 180 U/minworkpiece weight: 3500 kgtotal power requirement: 228 kVAweight of the machine ca.: 54 tdimensions of the machine ca.: 7,9 x 3,55 x 3,4 mThe Hegenscheidt-MFD portal wheel lathe is a wheel lathethat is easy to operate and maintain. Its portal design allows for wheel setsto roll through the lathe on shop rails. The mechanical elements and drive system are designed for cutting performance up to 32 mm² per tool post. This allows for a short floor-to-floor time for re-profiling, even for extreme wheelwear conditions.Mounted to each side of the portal type bed are the headstocks, with integrateddrivers, centers and a main drive system fitted to each headstock. Both headstocks are movable for ease of the load and unload functions.- Working R ...

turning diameter: 1000 mmturning length: 3000 mmcontrol: Siemens 828D turning diameter over bed: 1000 mmturning diameter over slide rest: 700 mmworkpiece weight: tspindle drive motor: 33,6 kWspindle turning speed range: 1 - 550 U/mincentre height: 510 mmx-axis: 520 mmz-axis: 3020 mmspindle bore: 260 mmspindle nose: A2-15 tailstock quill taper MT: 5 diameter of quill: 130 mmtailstock quill stroke: 200 mmrapid travel (x and z-axis): 8 m/mintotal power requirement: 40 kVAweight of the machine ca.: 12,2 tdimensions of the machine ca.: 7,52 x 3,2 m- Siemens 828D CNC- C-axis- 8-station tool turret with powered tools (VDI 50), 3000 rpm- Tailstock- Powered tool holders- Chip conveyor- CEOperating hours: 2000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 220 mmturning length: 450 mmcontrol: Siemens 840 D main drive DC: 27 kWtotal power requirement: 27 + 8,5 + 5 + X kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 10 x 2 x 2 mMovie:https://www.youtube.com/watch?v=OffdO1J4G5YThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mmturning diameter over slide rest: 220 mmturning length: 1000 mmcentre height: 205 mm: mmspindle bore: 46 mmspindle turning speed range: 40 - 2000 U/mintotal power requirement: 22,0 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,42 x 1,3 x 1,55 mmLathes with:- Copying attachment- Forkardt 3-jaw chuck F250- Multifix tool post- Coolant system- Machine light- Chuck guard- Chip tray- Chip guard wall- Foot brakeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 240 mmturning length: 530 mmcontrol: Siemens 810 D Powerline swing diameter: 560 mmx-travel: 207,5 mmz-travel: 530 mmturning speeds: 6000 U/min: 12 Stk. total power requirement: --- kWweight of the machine ca.: 6,1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: max. 450 mmchucking diameter: 400 mmcontrol: Siemens 840D (Index)Main spindle:: Max. rpm: 4.200 min/-1power capacity - main spindel: ( 35,5 / 56 ) kWmax. Torque: ( 340 / 550 ) NmC-Axis: 0,001 °turret:: number of toolpositions: 2x 12 posdriven statition: 2x 12 posworktool system: VDI 30 max. spindle speed driven tools: 6.000 U/min.power capacity - driven tools: 9,5 kWmax. Torque: 40%: 19 NmY - Axis: +/- 90 mmB-Axis: +270° / -90 °axis stroke:: x-axis: 730 mmz-axis: 340 mmy-axis: +/- 90 mmb-axis: +270° / -90 °feeds:: rapid traverse: X: 40 / Z: 30 m/minpallet changer:: numbers of pallets: 24 pos.size of pallet: 410 x 300 mmmax. workpiecediameter: 300 mmmax. workpiece weight: incl. Pallet: 25 kgChain width: 75 mmband speed: 7,5 m/mintotal power requirement: 56 kWweight of the machine ca.: 9,0 tdimensions of the machine ca.: 8,5 x 6,0 x 2,7 mDocuments: Chip conveyo ...

turning diameter: 300 mmturning length: 1700 mmswing diameter over bed slide: 600 mmtotal power requirement: 12,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 380 mmturning length: 580 mmswing dia.: 695 mmX-Axis movement: 234 mmY-Axis movement: 100 mmZ-Axis movement: 575 mmMinimum indexing C-Axis main Spindle: 0,0001 °Number of tools on turret: 12 Number of driven tools: 12 xSpindle speed driven tools: 4500 1/minSpindle motor driven tools: 5,5 / 3,7 kWTool type: Mazak VDI control: MATRIX NEXUS II Main Spindle:: Spindle Speed: 5000 1/minspindle motor: 26 / 22 kWspindle bore diameter: 76 mm2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 11 / 7,5 kWspindle bore: 80 mmtotal power requirement: 43 kVAWeight: 5,5 tdimensions of the machine ca.: 2,8 x 2,1 x 1,9 m- Mazatrol Nexus II CNC control- Main and counter spindle- 12-station tool turret with driven tools and Y-axis- 3-jaw chuck-- Main: 8-- Counter: 6- Automatic presetting (Tool Eye).- Automatic workpiece catcher.- Side belt chip conveyor (Mayfran).- Enhan ...