tornos usadas para venda (3,158)

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 6.944h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.650h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1250 mmturning diameter over slide rest: 1000 mmturning length: 11000 mmtotal power requirement: kWweight of the machine ca.: 49 tdimensions of the machine ca.: mCenter height 720 mmCenter distance 11000 mmTurning diameter over bed 1250 mmTurning diameter over slide 1000 mmWorkpiece weight max 12 toSpeed 3-315 rpm - steplessMotor power 55 kW (DC)Equipment1 position indicator HEIDENHAIN | Type ND 780 for 1 axis1 four-jaw faceplate Ø 1000 mm1 fixed steady rest1 ring steady rest with four-jaw faceplate Ø 920 mm1 Autom. 4-pos. tool holder1 Chip conveyor1 Machine lamp1 Coolant device Operating key | operating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 280 mmturning length: 1000 mmturning diameter in the gap: mmturning speeds: 70 - 2000 U/mincentre height: 195 mmspindle bore: 54 mmtailstock quill taper MT: 3 MKconnected load frequency: 400 Vtotal power requirement: 2,2 kWweight of the machine ca.: 0.85 tdimensions of the machine ca.: 1,95 x 1,0 x 1,75 mProfessional industrial machine3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotating4-fold steel holder.Halogen machine lightMachine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 0 mmturning diameter over slide rest: 900 mmturning length: 1.000 mmtotal power requirement: 25 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mHeight of centres 550 mmMax. turning Æ 1200 mmMax. turning Æ over slides, approx. 900 mmMax. turning length, approx. 1000 mmSpindle bore, approx. 90 mm24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/minTotal load, approx. 25 kW - 380 V - 50 HzWeight, approx. 8000 kgAccessories/specialitiesTwo separate slides, each equipped with 2-coordinate copyingequipment, program controlled by plugboard, strengthened bearingsand spindle, hardened an ...

turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 1,1 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,3 x 0,6 x 0,65 mBenchtop lathe 3-axis LCD digital display system fully assembled.Longitudinal feed.3-jaw chuck 125 mm.4-jaw chuck 125 mm.Clamping plate.4-way steel holder.Clock for thread cutting.Drip trayHardened bed tracks.Emergency stop switch.Forage protectionSet of wheels.Appropriate tools.Base cabinet is optionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diâmetro de giro: 250 mmcomprimento de giro: 450 mmcontrole: TX8D furo: 80 mmvelocidade do eixo:: 3150 U/min.Torno CNC com alimentação de barra e 3 torresFuro de eixo muito grande, com dispositivode carregamento de barra Por favor, peça mais detalhes.

turning diameter: 250 mmturning length: 400 mmcontrol: C 200 / 8 total power requirement: 60 kWweight of the machine ca.: 8,5 tSwing Ø above bed, max. 300 mmMax. turning Ø for chucking work, approx. 250 mmTravel of Slides:Turret 1, X / Z travel 163 / 550 mmTurret 2, X / Z / Y travel 140 / 250 / 260 mmSpindle bore, approx. 65 mmTool holder bore 30 mmSpindle speeds 25 - 5,000 rpmFeed range 0 - 15,000 rpmSpindle drive 0.5 - 40 kWTotal electrical load 60 kW - 380 V - 50 HzWeight, approx. 8,500 kgAccessories / Special Features SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8) for at least 6 axes, with enlarged memory and with subprograms, simulation, etc. Double column loading device for large workpieces, mounted above the machine. With 3-jaw gripper and storage system for blanks and finished parts, integrated in the CNC control. Spindle indexing and pos ...

turning diameter over bed: 250 mmturning diameter over slide rest: 130 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 20 mmtailstock quill taper MT: 2 tailstock quill stroke: 60 mmmetric threading: 0,4 - 3,0 mmthread - inch: 10 - 44 TPIthread - module: 0,2 - 12,5 mmconnected load frequency: 230 Vtotal power requirement: 1,0 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 1,09 x 0,59 x 0,45 mEquipped with- 20 mm spindle passage- adjustable guideways- Powerful 1.0 kW motor- continuously variable speedScope of delivery:- 3-jaw chuck 100 mm,- 4-jaw faceplate chuck 125mm- standing and rotating bezel- Splash guard- Feed protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 25-90 mmthreading length: 3000 mmthread pitch: 2-16 mmtotal power requirement: 25 kWweight of the machine ca.: 10,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 250 mmturning length: 100 mmcontrol: SIEMENS 840 D total power requirement: 35 kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mE M A G (Germany)Vertical CNC Controlled Hard Turning and Grinding machinewith tool turret and workpiece handling SystemModel VSC 250 DS Year 2004 # M7 28.69324_______________________________________________________Turning Ø, max. 250 mmTurning length internal / external 100 mmWorkpiece length min./max. 29 – 100 mm6-positon tool turret Ø / swing-Ø 480/790 mmWorkpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mmFeed rate / Quick feed X/Z 45/30 m/min.Feed force X/Z  ...

turning diameter: 400 mmturning length: 915 mmcontrol: NUM Type 1062 T total power requirement: 12,5 kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mmturning length: 710 mmcontrol: SIEMENS SINUMERIC 840 total power requirement: 40 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mI N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstockand INDEX CNC Control C 200 – 4 (SIEMENS)Model G 300 Year 1995 S/N 5000 65_____________________________________________________________Turning - Ø, with chuck, max. 300 mmSpindle bore 90 mmMax. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mmTurret head slide cross movement (Z-Axis) max. 140 mmTurret with 12 tool holder positions DIN 30 mmFeed range of turret slide /  ...

turning diameter: 150 mmturning length: 500 mmcontrol: total power requirement: 4 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mmturning length: 400 mmcontrol: SIEMENS SINUMERIC 840 C total power requirement: 40 kWweight of the machine ca.: 6.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 125 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,135 tdimensions of the machine ca.: 1,25 x 0,6 x 0,6 mSpeed in 6 levels 125 - 2000rpm.3-jaw chuck 125 mm.4-jaw chuck 125 mm. (Independent)Fixed bezel.Revolving bezel.4-fold steel holder.chip tray.back panel.spindle protection.Hardened bed rails.Longitudinal feed with left / right switching.Set of change gears.Associated Tools.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mmturning diameter over slide rest: 200 mmturning length: 900 mmturning diameter in the gap: 320 mmturning speeds: 75 - 2000 U/mincentre height: 160 mmspindle bore: 38 mmtailstock quill taper MT: 3 connected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,6 x 0,75 x 1,7 mSINO digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 250mmbezel fixedQuick-change steel holder with 4 pcs. steel holdermachine lightChip tray, chip protection wallHardened and ground bed trackslining protectionmachine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Estamos a vender um centro de viragem Haas ST-20 em nome de um cliente. A máquina foi instalada e nunca utilizada de forma produtiva., - Opções de controlo, - pacote de opções, - fluxo de refrigerante de alta pressão, - pacote de acessórios

diâmetro de giro: 60 mmcomprimento de giro: 200 mmnúmero de lâminas: potência total necessária: 20 kWpeso da máquina ca.: tdimensões da máquina ca.: m

turning diameter: 42 mmturning length: 250 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC-lathe with bar feedwith Sameca bar feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1250 mmswing diameter: 1160 mmturning height: 800 mmfaceplate diameter: 1000 mmtotal power requirement: 97 kWweight of the machine ca.: 25000 tdimensions of the machine ca.: mP I T T L E R (Germany)CNC Controlled Vertical Turning and Milling CentreWith Tool Changer and Pallet ChangerModel PV 1250 / 1-1 Year 1994 _______________________________________________________Turning Ø max. 1,000 mmSwing Ø max. 1,160 mmTurning length 800 mmX Axis - horizontal 1,300 mmY Axis - vertical 800 mmFeed / quick feed 16,000 mm/minMain spindle speeds 10 - 1,000 rpm !Main spindle speeds via separate C Axis 0.1 - 16 rpmPositioning accuracy of C Axis 360° + / - 5 Tool holder ISO 50Tool drive 22 kWMax. torque / spindle speed 315 Nm / 2,500 rpmPallet size 630 x 630 mmSpindle drive  ...

swing diameter: 640 mmmax. turning passage: 640 mmcontrol: Simens 840 D Powerline - - - - - Main spindle - - - - -: - - - - - -bar material dia.: 65 mmchuck diameter: 200 - 315 mmspindle bore diameter: 80 mmdiam. of main spindle in forward position: 120 mm--- Subspindle ---: - - - - - -bar material dia.: 65 mmchuck diameter: 315 mmspindle bore diameter: 80 mmforward bearing diameter: 120 mm- - - - - General data - - - - -: - - - - - -spindle distance: 1.500 mmturning length: 1.185 mmMain-/Counter -spindle turning speeds: 5.000 U/mindriven tools turning speeds: 12.000 U/minSlide cross: X1, Y1: 550 / 180 mmSlide cross: Z1: 1.185 mmSlide cross: B1: 240 °Slide cross: X2: 180 mmSlide cross: Z2: 1.050 mmSlide cross: Z3: 1.150 mmCNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret for driven tools and and  ...

diâmetro oscilante: 530 mm0: 620 mmLargura da roda: 20 mmdiâmetro do rolo: 45 mmPotência total necessária: ohne kWpeso: 250 kgdimensões da máquina ca.: 1,2 x 0,30 x 1,3 m

turning diameter over bed: 250 mmturning diameter over slide rest: . mmcentre distance: ca. 400 mmcentre height: ca. 125 mmturning speed range: 80 - 3000 U/minnumber of speeds: 18 spindle bore: 24 mmtailstock quill taper MT: 3 weight: ca. 400 kgdimensions: ca. 1200 x 650 x 1300 mm4-jaw-chuck diameter: 125 mmincluding Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws,collet chuck device incl. collets 1-20 mm (exept 5 and 10 mm) with 1 mm gradientMultifix size A with 3 interchangeable holders,chuck protection with shutdownThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Especificações: Fabricante: Spinner Tipo: SB-CNC Ano de Marca: 1998 Controle: Siemens 840D Cursos: X 250 mm Z 285 mm Horas de ligação: 32.156 h Eixo principal: Velocidade do eixo: 5.000 rpm Passagem do eixo: 42 mm Suporte para ferramentas: Suporte para ferramentas: Multifix A no feixe linear Dimensões e peso Dimensões: 2.100 mm x 800 mm x 1.600 mm Peso: aprox. 1.500 kg Condição Estado: Usado Funcional: Testado e totalmente funcional Outros equipamentos e acessórios incluídos: Mandril de collet Interface para alimentadores de barras A máquina tem uma elevação de cabeçote de 10 mm.

: 350 mm: 0650 mm: : 175 mm: 42 mm: 315 mm: 3500 U/min : D1-4 DIN 55029 : 63 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Controlo: OSP-P 300S-H Viagens: Eixo X: 695 mm Eixo Y com curso: +150/ -150 = 300 mm Eixo Z: 1.600 mm Eixo B: 240, posicionamento em 0,001 Eixo C: 360, posicionamento em 0,001 Eixo W: 1.524 mm Diâmetro de giro: 650 mm Comprimento de giro: 1.500 mm Montagem: HSK 63 Total de posições da ferramenta: 40 Acessórios: Eixos XA e YA com sistema de medição absoluta direta (Escala Okuma ABSO) Medição em processo com sondas de eixo X/Z Renishaw Medição no eixo Y, incluindo medição no modo eixo oblíquo KitagawaB215A11 máx. 2.800 rpm KitagawaB210A8 máx. 4.200 rpm Cilindro de fixação oco Kitagawa F 2596-H01 96 mm IGF com um toque Software Multi-Ferramenta Oscilação harmónica da velocidade Pacote de software de usinagem simultânea de 5 eixos Transportador Tanque de refrigerante com bomba de alta pressão 70bar

7 eixos Passagem máxima do eixo: 16 mm Curso máximo do cabeçote: 205 mm EIXO PRINCIPAL Velocidade do eixo: 10000 1/min Potência de acionamento do eixo: 3,7 kW Resolução mínima do eixo C: 0,001 [graus] SUB-SPINDLE - Extremidade máxima da haste: 16 mm - Velocidade do eixo: 9000 1/min - Resolução mínima do eixo C: 0,001 [graus] FERRAMENTAS 5x Suporte de ferramenta giratório na corrediça linear 4x unidade de perfuração incluindo suportes de perfuração (dianteiros/traseiros) Ferramentas acionadas 3x para usinagem transversal em corrediças lineares 4x ferramentas incluindo suportes de broca para usinagem reversa Velocidade das ferramentas acionadas: 7500 1/min Transportador Alimentador de barras FMB minimag 18/3200

faceplate diameter: 1250 mmswing diameter: 1450 mmturning height: 1200 mmslide adjustment: 800 mmside head - cross travel: 600 mmdigital readout: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.About Usmore than 400 own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 650 mmturning length: 2000 mmturning diameter over slide: 260 mmHolder Multifix: control: Siemens type: Sinumerik tailstock quill taper MT: 5 transmission ratio: 2 turning speeds: 1-2000 U/minspindle bore: 106 mmtotal power requirement: 38 KWweight of the machine ca.: tdimensions of the machine ca.: 7,4x2,5x2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.