tornos usadas para venda (3,158)

: 0400 mm: 1250 mm: : 200 mm: 55 mm: 315 mm: 2700 U/min : D1-6 DIN 55029 : 73 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 1,3 x 0,65 x 0,6 mlongitudinal feed.3-jaw chuck 125 mm.4-way steel holder.chip tray, bulkheadHardened bed tracks.Emergency stop switch.lining protectionTool box, instruction manual.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 290 mmturning diameter over slide rest: 170 mmturning length: 750 mmturning speeds: 75 - 2000 U/mincentre height: 145 mmspindle bore: 38 mmtailstock quill taper MT: 3 MKtailstock quill stroke: 80 mmconnected load frequency: 230 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,34 tdimensions of the machine ca.: 1,3 x 0,75 x 0,7 mLongitudinal and transverse feed.3-jaw chuck 160 mm.4-jaw chuck 160 mm.faceplate4-way steel holder with 4 pcs tool holders2 pcs. bezelsMachine lightDrip trayHardened bed tracks.Emergency stop switch.Feed protectionSet of wheels.Machine tools.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mmturning diameter over slide rest: 220 mmturning length: 1000 mmturning diameter in the gap: 380 mmturning speeds: 70 - 2000 U/mincentre height: 180 mmspindle bore: 50 mmtailstock quill taper MT: 3 MKconnected load frequency: 230 oder 400 Vtotal power requirement: 1,8 kWweight of the machine ca.: 0.65 tdimensions of the machine ca.: 2,0 x 0,8 x 1,56 mProfessional industrial machine3-axis digital display3-jaw chuck 180 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotating4-fold steel holder.Halogen machine lightMachine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 420 mmturning length: 1250 mmcontrol: INDEX, C 200-4 D swing diameter: 630 mmtravel x1: 320 mmtravel z1: 1250 mmtravel x2: 170 mmtravel z2: 1250 mmtravel x3: 320 mmtravel z3: 1250 mmmain spindle speed: max. 3000 U/minmain spindle drive: 53 kWspindle passage: 102 mmspindle head: DIN 55026 Gr. 11 max. torque on the spindle: 675 Nmsub spindle - spindle speed range: max. 3000 U/minsub spindle drive: 53 kWsub spindle - spindle passage: 102 sub spindle - spindle head: DIN 55026 Gr. 11 sub spindle - spindle torque: 675 Nmtravel sub spindle: 1250 mmfeed power: X1 14000/Z1 14000 Nrapid traverse: X1 20/Z1 40 m/minfeed power: X2 8600/Z2 14000 Nrapid traverse: X2 20/Z2 40 m/minfeed power: X3 14000/Z3 14000 Nrapid traverse: X3 20/Z3 40 m/minnumbers of turret head positions: Rev. 1 = 12 numbers of turret head positions: Rev. 2 = 10 numbers of turret head positions: Rev. 3 = 12 n ...

turning diameter: 500 mmturning length: 1500 mmcontrol: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mmspindle bore: 70 mmspindle turning speed range: 3 - 2800 U/minspindle power: 15 kWmax. torque on the spindle: 1530 Nmspindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 Nrapid travel - longitudinal/face: 10 / 5 m/minbed width: 360 mmtravel of cross-slide: 265 mmupper slide travel: 140 mmturning tool - shaft cross cut: 32 x 25 mmtailstock quill diameter: 80 mmtailstock quill stroke: 160 mmtailstock taper MT: 5 total power requirement: kWweight of the machine ca.: 3,3 tdimensions of machine L x W x H: 3,45 x 1,65 x 1,93 mAccessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mmturning diameter over slide rest: 240 mmturning length: 1000 mmcentre height: 205 mmcentre distance: 1000 mmspindle bore: 47 mmspindle turning speed range: 28 - 1250 U/minfeeds - longitudinal: 0,03 - 8,8 mm/Ufeeds - cross: 0,006 - 1,84 mm/Uthread - mm pitch: 0,25 - 76 mmthread - inch: 1/2 - 152 Gg/thread - module: 0,25 - 22 mmbed width: 320 mmtailstock quill diameter: 55 mmtailstock taper MT: 4 face slide travel: 290 mmupper slide travel: 120 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,3 tdimensions of machine L x W x H: 2,32 x 1,15 x 1,22 mAccessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head with 2 inserts, solid steady, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Altura central: 400 mm Largura central: 1250/1300 mm Ø circunferencial: sobre a cama 440 mm Furo do eixo: Suporte do fuso: Pick-up cone tailstock: 5 MK Velocidades do eixo: 11,2 - 2240 rpm Alimentação: longitudinal/plana 0.1-2.8/0.05-1.4 mm/rev Pitches de tópicos: Conexão elétrica: 380 V, 11 kW Requisito de espaço: 3400 x 1400 x 1300/1700 mm Peso: aprox. 2700 kg

Altura central: 300 mm Largura central: 1000 mm Ø circunferencial: sobre a cama 610 mm Furo do eixo: 71 mm Suporte do eixo: tamanho 8 Pick-up cone tailstock: 5 MK Velocidades do eixo: aprox. 11,2 - 1800 rpm Alimentação: longitudinal/plana 0.014-16/0.063-7 mm/rev Inclinações de rosca: 0.1 - 112 mm Conexão elétrica: 380 V, aprox. 5,5 kW Requisito de espaço: 2900 x 1450 x 1750 mm

controlo: FANUC 21i-TB Eixo x de controlo: 390 mmeixo z: 780 mmcone do eixo: A2-11 número de velocidades do eixo: 2000rpm potência do motor: 37 kWpeso da máquina ca.: 9000 kgdimensões da máquina ca.: 1905,0 × 2720,0 × 3260,0 m

swing dia.: 440 mmmax. turning diameter: 220 mmturning length: 450 mmtravel -x axis: 200 mmcontrol: Fanuc 18i-TB max. helix angle: 60 °spindle bore: 64 mmtool taper: VDI 30 numbers of positions in the tool changer: 12 CNC Lathe | COLCHESTER - TORNADO T6MSequipped with counter spindle and chip conveyor.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar material dia.: 75 mmmax. max. swing dia.: 540 mmturning length: 650 mmcontrol: FANUC Oi-TB machine weight ab.: 6.200 kgCNC Turning- and Milling Center | JOHNFORD - SL-50-CF-Yequipped with chip conveyor.Additional equipment:+ C axis+ Y axis+ driven toolsThe machine is in good condition.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: SL 50 | SL50 | SL-50 CF Y | SL50 CF YThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. swing diameter over bed: 510 mmmax. turning diameter: 260 mmMax. Turning length: 540 mmtravel -x axis: 240 mmcenter height over bed: 260 mmcontrol: FANUC 21i-TB spindle bore: 77,5 mmno. of tools in turret: 12 xtool taper: VDI 40 CNC Lathe | COLCHESTER - TORNADO T8The machine is in good condition.Please refer to further technical details in the attachement of the offer.A machine video will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: T 8 | T-8The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 480 mmturning length: max. 2.000 mmcontrol: Sinumerik 840 D Siemensswing diameter max. over bed cover: 520 mmMain spindle:: turning speed range - main spindle: 7 - 2.800 min/-1transmission ratio: 2 power capacity - main spindel: 53 kWmax. Torque: 3.456 Nmspindle nose: 11 DIN 55026chuck diameter: 315 mmspindle bore: 103 mmusable bar diameter: 82 mmaxis stroke:: x-travel: 405 mmz-travel: 2.049 mmTailstock:: diameter of quill: 100 mmquill stroke: 100 mmtension force: 14 kNcapture: 30 DIN 2079feeds:: rapid traverse: 10 m/minWorking speed: 0,1 - 10.000 mm/minfeed power: 15 kNTool Mount:: number of toolpositions: 12 pos.driven statition: 6 pos.Shank diameter: 50 mmpower capacity: 5,4 kWMax. Speed: 2.500 / 625 min/-1max. Torque: 25 / 100 Nmtotal power requirement: ca. 50 kWweight of the machine ca.: 14 tdimensions of the machine ca.: 6,4 x 3,8 x 3,0 mDocuments: Chip ...

Controle Siemens Sinumerik 840D Passagem da barra 65 mm Velocidades 5.000 min-1 2 x revólver de 12 velocidades com revólver acoplado Concorrência. Torreta 1 com eixo Y Instalação de recolha de peças Sistema de filtro de correia Transportador Revista de carregamento de barras IRCO Profimat

turning diameter: 250 mmturning length: 510 mmcontrol: Fanuc I Series total power requirement: 12 kWweight of the machine ca.: 4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diâmetro de giro sobre a cama: 32 mmfaixa de velocidade de giro do eixo: 8000 U/minpassagem do eixo: mmcomprimento de giro: 320 mmControlo: Fanuc 0i-TC necessidade de potência total: kWpeso da máquina ca.: 3,5 tdimensões da máquina ca.: 2,63 x 1,3 x 1,8 m

faceplate diameter: 4000 mmswing diameter: 4300 mmturning height: 1750 mmslide adjustment: 1000 mmtable load: 18 tturning speeds: 43,7 U/minControl: Siemens type: 840 D mmRest: 2 chip conveyor: ram head dimension: 250x250 mmlive tooling: 36 kwtotal power requirement: 85 KVAweight of the machine ca.: 64 tdimensions of the machine ca.: 8x5,8x8 mThe machine is currently designed to machine rings,but can be converted again for machining large parts.The technical data are manufacturer or operator information and are thereforenon-binding for us. We reserve the right to sell the machine prior to the sale,our terms and conditions of sale apply exclusively.About usMore than 400 own machines in stockOver 12,000 m² of storage space, crane capacity 70 tMore than 10,000 items of accessories for your workshopIf you want to sell machines, production lines or your business, then contactus.The data for ...

Digitais Diâmetro de giro 120 mm Comprimento de giro 700 mm Velocidade do eixo 2000 min-1 Tailstock

Controle Fanuc Série 20-T Diâmetro de giro 330 mm Diâmetro da barra 42 mm Comprimento de giro 650 mm Velocidades 5.000 min-1 Revólver de 8 velocidades Lubrificação em quantidade mínima

turning diameter over bed: . mmturning diameter over slide rest: 100 mmturning length: . mmswing diameter: 200 mmThe technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch teamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pequena construção fina com 3 RPMs no sentido horário e 3 RPMs no sentido anti-horário

Suporte para haste de perfuração com haste de perfuração, D = 50 mm, comprimento 650 mm . . Suporte de aço de retração, CFG .

diâmetro de giro: 254 mmcomprimento de giro: 600 mmcontrole: Seicos necessidade de potência total: 15 kWpeso da máquina ca.: 5,6 tdimensões da máquina ca.: 2,5 x 1,3 x 1,87 m

turning diameter over bed: 1420 mmturning diameter over slide rest: . mmturning length: 3150 mmfaceplate: 500 mmturning speeds: 176 U/minsteady: 160 mmtotal power requirement: kWweight of the machine ca.: 15,68 tdimensions of the machine ca.: mChip conveyor can be purchased as an option for €7,500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2 mm, 10 mm

Descrição KRAMATORSK Torno pesado CNC 1 K 671 320 F3 Detalhes Tipo 1 K 671 320 F3 Ano de construção 1988 (comissionado pela primeira vez em 1998) Comprimento de giro 10.000 mm Diâmetro de giro sobre leito 2.000 mm (modificado) Diâmetro da placa facial 1.950 mm Faixa de fixação da placa facial 400 - 1.350 mm Velocidades 1,00 - 140 rpm. Binário 125.000 Nm Força de corte principal 130 kN máx. O tailstock pode ser girado automaticamente peso máximo da peça: 70 a peso máximo da peça com repouso estável de 100 a Potência de acionamento 100 kW Número de faixas de cama 4 Dimensões 22.000 x 6.200 x 2.900 mm Controlo CNC SIEMENS 840D (2010 por 220.000,00 €) Alimentação de suporte X-Z 0.3 - 4.000 mm/min. Suporta travessia rápida X-Z 4.000 mm/min. Dimensões cone interno 140 x 1 ...

faceplate diameter: 2500 mmswing diameter: 3300 mmturning height: 1900 mmworkpiece weight: 15000 kgvertical adjustment of the crossrail: 1600 mmturning speed range - faceplate: 1 - 90 U/minmain drive motor: 60 kWram head swiveling: +/- 35 °ram head - cross travel: 1200 mmram head - vertical travel: 720 mmfeed range: 1 - 4000 mm/minControl: total power requirement: ca 70 kWweight of the machine ca.: 40 tdimensions of the machine ca.: 4,8 x 4,8 x 5 mComplete overhaul in 2025- CNC FANUC 0i-TF- 1 ram on crossbeam- 4 clamping jaws for face plate- CE-- mechanical overhaul of all components (adjustment of the geometricalparameters of the machine according to ISO 3655)-- Grinding of the guides-- New telescopic covers-- FANUC main motor-- new electrics and CNC control-- new Fanuc servomotors-- ball screws dia. 50mm-- new hydraulicsthe machine image is an example image after overhaulThe data for ...

turning diameter over bed: 2000 mmturning diameter over slide rest: 1600 mmturning length: 10000 mmcontrol: FANUC 0i TF workpiece weight: 25 tsteady: 4 feed: 1 - 3000 mm/minmain drive: 60 kWmain spindle speeds:: 1,5 - 160 U/minbed width: 1150 mmfaceplate: 1600 mmtail stock: tailstock quill diameter: 260 mmtotal power requirement: 110 kWweight of the machine ca.: 120 tthe machine is currently being overhauled and equipped with- new electrics (Siemens, Schneider, cabinet)- CNC control FANUC 0i TF- new Fanuc motors- new hydraulic parts- complete mechanical overhaul- Ball screw (B-axis)- bed overhaul- three-track bed- Grinding device 1500 rpm- Milling Unit- Face plate with 4 jaws- 3 steady rests- incl 1 year warranty from overhauler on electrical and hydraulic components and 2 years on FANUC CNCCompletion of overhaul after order (approx. 2 months)The data for this ad was created with ModulM ...

faceplate diameter: 2500 mmswing diameter: 3500 mmturning height: 2000 mmfaceplate speeds from - to: 100 UpMmax. workpiece weight: 15 tmain drive motor: 45/55 kWControl: Fanuc 18i-TB ram head dimension: 240 x 240 mmx-axis: -200 / +2950 mmz-axis: 1200 mmw-axis: 1000 mmfeed range: 1 - 3000 mm/minrapid travel (x and z-axis): 1- 10000 mm/mintotal power requirement: - kWweight of the machine ca.: ca 70 tdimensions of the machine ca.: 10,8 x 6,95 x 7,15 mCNC vertical lathe- CNC control Fanuc 18i-TB- Face plate- 1 ram- Protective housing- Coolant system- 12-position tool changer (static tools)- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm: 1000 mm: : 167 mm: 40 mm: 3000 U/min : DIN 55029 D1-4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.