tornos usadas para venda (3,073)

turning diameter:300 mmswing diameter:350 mmturning height:275 mmx-axis:925 mmz-axis:250 mmclamping chuck diameter:200 mmFeed speed:30 m/min.total power requirement:45 kWweight of the machine ca.:7 tMachine was used just from time to time in the last years - very good condition!with CNC SIEMENS 840 D12-station turret head with driven toolingsworkpiece in and out conveyor beltcoolantattachment and chip conveyordiverse accessories

turning diameter over bed:1000 mmturning diameter over slide rest:745 mmturning length:3000 mmturning speed range:4,5 - 900 U/minspindle bore:110 mmmax. workpiece weight between centres:12500 kgtotal power requirement:30 kWweight of the machine ca.:9 tdimensions of the machine ca.:5,2 x 2,3 x 2 m3-axes digital readoutrapid feed, feed at upper support 350 mm 1 fixed steadyface plate diameter 1000 mmcoolant attachment

turning diameter:275 mmturning length:900 mmspindle passage:65 mmpower capacity at 100 % load:25/20 kWspindle turning speed range:1 - 5000 U/minspindle diameter in front bearing:110 mmc-axis:1 - 500 U/min.number of workpiece supports:4 tool turret:1 x-axis:290 mmy-axis:165 mmz-axis:360 mmb-axis:360 °rapid speed:18/30 m/minnumber of tools:2x2 + 2x2 number of driven tools:2x2 + 2x2 mmtoolpiece turning speed range:8000 / 2000 U/minpower capacity:25% ED 5,8 kWtool taper:TRAUB 60 tool turret:2/3/4 x-axis:170 mmz-axis:600/950 mmy-axis:+/- 60 mmrapid speed:18/15/30 m/minnumber of driven tools:10 mmtoolpiece turning speed range:1 - 6000 U/minpower capacity:25% ED 5,8 kWtool taper:DIN 69880 40 x 63 total power requirement:95 kWweight of the machine ca.:16 tdimensions of the machine ca.:10,0 x 3,5 x 3,0 mwith CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000,Main and Sub spindle with C-axis1  ...

bar material dia.: 32 mmspindle passage: 38 mmturning length: 320 mmturning speeds: 8000 U/minc-axis: 0,001 ° Gradgripping station: 32 turning length: 150 mmturning speeds: 8000 U/minc-axis: 0,001 ° Gradnumber of tools: 4+7+6+10 =27number of milling stations: 4+4 control: Mitsubishi M70 Number of axles: 5+2x C Achse 7 St.load magazine: FMB 3-36 total power requirement: 7,5/5,5 kWweight of the machine ca.: 3300 kgdimensions of the machine ca.: 2,5 x 1,2 x 1,82 plus FMB mbar loader: FMB Turbo 3-36 parts conveyor: ja/yes fire distinguisher: Kraft & Bauer Citizen A32-VIIPL CNC vertical lathe, manufactured in 2011with FMB Turbo 3-36 loading magazine,In very good condition! Regularly serviced by Citizen Service.The machine has been operated in 3 shifts, 5 days a week.A total of 12 Citizen A32-VIIPL machines are available.Reason for sale: The project has now come to an end.We are also selling ...

turning diameter:830 mmturning length:4000 mmturning diameter over bed slide:540 mmspindle bore:130 mmturning speed range:2 - 1600 U/minrapid speed:4 / 5 m/minfeed speeds:1 - 2000 mm/mintotal power requirement:55 kWweight of the machine ca.:7,5 tdimensions of the machine ca.:7 x 2,2 x 2 mwith Teach In controll R&D MTC-KMULTIFIX toolpost size Dcoolant attachment

turning diameter: 400 mmturning length: 549 mmcontrol: HEIDENHAIN Eltropilot swing over bed: 570 mmtravel -x axis: 220 mmtravel -z axis: 635 mmmain spindle bore: 79 mmmain spindle speed: 25 - 5000 U/minmain spindle drive: 21 kWmax. torque on the spindle: max. 240 Nm: 120 mmc-axis, speed: 100 U/minC-axis: Haltemoment 200 NmC-axis resolution: < 0,04 °sub spindle bore: 56 mmsub spindle speed: 25 - 5000 U/minsub spindle drive: 9 kWmax. torque on the spindle: max. 72 Nm: 90 mmc-axis, speed: 100 U/minC-axis: Haltemoment 150 NmC-axis resolution: < 0,04 °feed power X/Z axis: 3,5 / 7 Nmrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/mintool turret: 1 x 12 Stationennumber of driven tool stations: 12 speed of driven tools: 4.000 U/mintotal power requirement: 44 kVAAccessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub spindle,  ...

Equipped with tools cart incl. Tools; pneumatic chuck; Auction-ID: A1-47369-1000

swing diameter over bed slide: 580 mmturning length: 740 mmturning diameter: 295 mmchucking diameter: 254 mmswing diameter over cross slide guide: 402 mmturning speeds: 3000 U/minPower: 30 KWspindle bore: 95 mmbar capacity: 78 mmspindle nose: A2-8 x-axis: 250 mmz-axis: 790 mmTool changer: 12x VDI 20 control: HURCO WinMAx total power requirement: - kVAweight of the machine ca.: 12 tdimensions of the machine ca.: 3,9 x 2,5 x 2,1 minstalled 2025equipped with:- CNC Control WINMAX -- Dual Screen- 254mm 3-JAW HYDRAULIC CHUCK- LIVE TOOL, FULL C-AXIS- TOOL PRESETTER- CHIP CONVEYOR- TRACER V-65LE PNEUMATIC BARFEED, 5’ BAR CAPACITY- PARTS CATCHER- TAILSTOCK, MANUAL POSITION, PROGRAMMABLE HYDRAULIC QUILL- MISC TOOLING INCLUDED- FLOOD COOLANT- WINMAX STANDARD PACKAGE- TOOL PROBING- 2ND SCREEN- ULTIMOTION- THREAD REPAIR- 4GB RAM, 128 GB HARD DRIVE- MACHINE TIME: 969.6 HOURS, SPINDLE TIME: 117 HOURS ...

turning diameter over bed: 820 mmturning diameter over slide rest: 575 mmturning length: 1.500 mmturning diameter in the gap: 1.040 mmcenter height over bed: 400 mmcentre distance: 1.600 mmbed width: 560 mmspindle taper: KK 11 CAMLOCK DIN 55022spindle bore: 128 mmworkpiece weight: 2.800 kg3-jaw-chuck diameter: 400 mmturning speed range: 5,6 – 1120 U/minpower requirement: 18,5 kWtaper in tailstock-quill: MK 6 dia. of quill: 100 mmquill stroke: 240 mmvoltage: 400 Vtotal power requirement: 20,0 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: 4,30 x 1,50 x 1,50 mCoolant Tank: 1,80 x 1,10 x 0,20 m- Serial-No.: 1049.2007.07- Powered top support- RÖHM 3-jaw wedge-type chuck- Quick-change tool holder- Quick-action drill chuck, Ø 1–13 mm- Coolant system- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe used Manufacturer: VOEST-ALPINE STEINLE Type: DA180/1 Year: 1991 Guide and pull spindle Tip height: 180 mm Width 1000 mm Power: 5.5 kW 380V With tool cabinet and accessories (see photos) Total dimensions: approx. 2200 x 1000 x 1800 mm + cabinet approx. 1000 x 400 x 1000 mm Matching pos. 31 : 2 x Lynettes Changes and errors in the technical data, specifications and prices reserved. Viewing on 20.11.26 only with prior registration at r.schober@kobran.de! Attention! We dismantle and load for you. You just have to organize a transport.; For this service, the additional costs shown are.; Auction-ID: A1-51900-2

turning diameter: 450 mmturning length: 380 mmcontrol: Seicos 40L Multi max. machining diameter: 340 mmBar feed: 51 mmturning speed range - spindle: 30 ~ 5.000 U/mindrive capacity - spindle motor: 11 / 7,5 kWspindle nose: A2-6 spindle bore: 59 mmbearing diameter: 100 mmtravel -x axis: 215 mmtravel -z axis: 400 mmturret (x-stations): 16 feed: 0,001 ~ 500 mm/minrapid traverse: X/Z: 30 m/minShank diameter: 25 x 25 mmDrill shank diameter: 40 mmtail stock: taper of center: MK 5 tailstock adjustment: 300 mmtotal power requirement: 23 kVAweight of the machine ca.: 4,6 tdimensions of the machine ca.: 5,5 x 2,8 x 2,2 mDocuments: Chip conveyor: Tailstock: Signal-Light: Parts removal: tool setter: work light: tool holders: (Revolver / Turret) CNC LatheHITACHI SEIKI - HiTec-Turn HT 20 RIIIThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conventional metal lathe, 3-jaw chuck, tailstock, chisel holder, belt drive, cast iron machine bed, Auction-ID: A1-50997-145

Lathe Accessories Used Manufacturer: 2 Lynettes suitable for lot 2 VOEST-ALPINE STEINLE Type: DA180/1 1 jaw chuck holder Total dimensions: approx. 500 x 500 x 500 mm Scope of delivery see photos! Changes and errors in the technical data, specifications and prices reserved. Viewing on 20.11.26 only with prior registration at r.schober@kobran.de! Attention! We dismantle and load for you. You just have to organize a transport.; For this service, the additional costs shown are.; Auction-ID: A1-51900-31

Lathe used Manufacturer: Maier & Co Type: emco Compact 10 Tip height: 140 mm Width 800 mm 380V Total dimensions: approx. 1400 x 800 x 1300 mm Scope of delivery see photos! Changes and errors in the technical data, specifications and prices reserved. Viewing on 20.11.26 only with prior registration at r.schober@kobran.de! Attention! We dismantle and load for you. You just have to organize a transport.; For this service, the additional costs shown are.; Auction-ID: A1-51900-4

Auction-ID: A1-50997-141

VDF Boehninger 640 Universal Lathe Type: Universal lathe Manufacturer: VDF Type: BOEHRINGER 640 Turning length: 1000 mm Turning Ø: 640 mm Spindle boring Ø: 385 mm Machine weight: 3500 kg Dimensions (L x W x H): approx. 3650 x 1100 x 1300 mm Distance between points: 1500 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51509-16

Small automatic/cam lathe with enclosed working area, bar/feed area and motorized unit. Used machine with visible wear; suitable for repair, parts or workshop use. Manufacturer/model and full specs to be confirmed. Auction-ID: A1-51509-39

serial number: 1022 2243-03 centre distance: 1500 mm: 560mm weight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0554 mm: 2000 mm: : 277 mm: 104 mm: 400 mm: 2000 U/min : D1-11 DIN 55029 : 95 mm: 145 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0554 mm: 370 mm: 3000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SAICC B26 special purpose/threading machine, made in Pavia, Italy. Older workshop machine with guards, spindle and manual controls. Exact application and operating condition to be confirmed. Auction-ID: A1-51509-60

Graziano SAG180 Lathe Type: Lathe Manufacturer: Graziano Model: SAG180 Year of manufacture: 1987 Turning length: 1500 mm Turning Ø: 450 mm Speed range: up to 1500 rpm Engine power: 7.5 kW Electric connection: 380 V Distance between centers: up to 1500 mm, allowing work on medium-length parts Approx. machine weight: 1700 kg Approx. dimensions (L x W x H): 2800 x 1300 x 1400 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51509-32

GRAZIANO SAG210 Centre Lathe Type: Centre lathe Manufacturer: GRAZIANO Model: SAG210 Year of manufacture: 1995 Maximum speed: 1800 rpm Electric connection: 380 V Approx. machine weight: 2850 kg Approx. dimensions (L x W x H): 3200 x 1600 x 1500 mm Swing over bed: 500 mm Swing over carriage: 280 mm Distance between centers: 1500 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51509-31

Cegonheira conventional centre lathe with chuck, toolpost, tailstock and screwcutting gearbox. Used industrial lathe; centre distance, spindle bore and operation to be confirmed. Auction-ID: A1-51509-7

Cazeneuve HBX 360 precision conventional centre lathe with chuck, toolpost and tailstock. Well-known toolroom lathe; used condition with visible wear. Full specifications to be confirmed. Auction-ID: A1-51509-12

Equipped with Heidenhain 3-axis digital display; Center height 180 mm, center width 1000 mm, D spindle passage 56 mm, spindle speeds 2000 rpm; Auction-ID: A1-51062-12

Center width 750 mm; circulation diameter over bed 330 mm; ventilation diameter face slide 160 mm; displacement path face slide 180 mm; bed width 240 mm; turning chisel cross-section 20x20 mm; spindle head according to DIN 55027 Gr.5; spindle diameter in the front bearing 70 mm; spindle bore 40.5 mm Auction-ID: A1-51062-13

High-quality, conventional precision lathe with toolmaker accuracy according to DIN 8605. The machine has two mechanically switchable speed ranges (V: 30—750 limin I W: 150—3000 Ilmin) for stepless fine adjustment as well as a clear table feed plate for metric threads and module threads. Mains voltage: 3phase/ 400 V (50 Hz), mains fuse 25 A. Premium equipment & spindle tools: 1 x Heidenhain digital multi-axis position indicator (DRO) type ND on adjustable monitor arm. 1 x Original Röhm precision three-jaw lathe chuck mounted on the main spindle (incl. chuck wrench). 1 x Original PARAT quick-change tool head (size 2 / type RD) including mounted lathe chisel hatter on the upper sled. 1 x Swivelling, transparent polycarbonate lining cover with electric safety lock. 1 x as well as integrated coolant system. Tip height: 175 mm Circumferential diameter over bed: 355 mm Circumfere ...

USED MORI SEIKI ZL 200 SMC CNC lathe SerialNo.: ZL200AE0279Year: 2001Power supply: 200 V – 50 Hz – 51 kVAMachine weight: 5,850 kgMain spindleBar diameter: 65 mmMax. turning diameter: 390 mmSpindle power: 11/7.5 kWSpindle speed: 40 - 4,000 rpmSpindle nose: JIS A2-6C-axis: 360° indexing increment 0.001° sub-spindleBar diameter: 51 mmSpindle power: 7.5/5.5 kWSpindle speed: 60 - 6,000 rpmSpindle nose: JIS A2-5C-axis: 360° indexing increment 0.001° Upperturret Number of positions: 12Number of motorized positions: 6Axis travel: X=235 mm - Z=520 mmLower turretNumber of positions: 8 Number of motorized positions: 4Axis stroke: X=175 mm - Z=500 mmEquipped with1 FANUC MSC 501CN 1 Toolmeasuring arm 1 Partsrecuperator 1 Chipconveyor 1 LNS QUICK LOAD SERVO II BAR FEEDER Auction-ID: A1-50950-89

turning diameter: 330 mmturning length: 669 mmcontrol: Siemens 828D total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.