trabalho de chapa metálica usadas para venda (3,299)

pressure: 50.0 tpunching cross-cut in cmm: 27.0 in 14.0 mm STround bar steel: 32 + 17 mmsquare edge steel: 30 + 18 mmL-beam: 100 x 10 mmthroat: 200 mmshear: flat material: 190 x 10 mmblade length: 200 mmstroke - stepless adjustable: 10 - 28 mmstroke: 14 - 28 H/mintotal power requirement: 4.0 kWweight: 900 kgrange L-W-H: 950 x 650 x 1730 mm from a maintenance workshop in good condition ()Equipment:- Compact electro-hydraulic combined structural steel shear with notching station with punching station flat bar shear angle steel shear round and square bar shear- Support table at the notching station- Support table at the punching station- Stripper at the punching station- 1x mobile foot switch- Assortment of various punches and dies- Original operating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1200 mm Weight: 310 kg Auction-ID: A7-50799-110

I - beam section - flat steel: 100 x 15 (d 400) mmI-beam section - upend: 60 x 10 (d 500) mmL-beam: 50x50x6,0 (d 600) mmround material: 35.0 (d 500) mmbar material dia. max.: 70 x 1.5 (d 1500) mmsquare material: 50x50x3.0 (d 1400) mmbending speed: 8.5 U/minroll diam. toproll: 152 / 162 mmbore: 40.0 mmStroke length: 120 mmvoltage: 400 Vtotal power requirement: 1.1 kWweight: 470 kgrange L-W-H: 900 x 600 x 1100 mm Original price with accessories: approx. 10.000 eurosFeatures:- Two driven rollers (lower rollers)- Manual feed of the upper roller- Horizontal and vertical working positions- Shafts mounted with tapered roller bearings- Lateral, manually adjustable stop rollers- 1 set of standard rollersâsplit - 1 sets of tube rollers- 1 freely movable control unit- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 120 x 20 (d 750) mmI-beam section - upend: 60 x 10 (d800) mmL-beam: 50 x 5 (d 1200) mmbar material - diameter: 35.0 (d 800) mmbar material dia. max.: 70 x 3.0 (1200) mm: 50.0 mmdiameter of upper rolls: 155 mmdiameter of lower rolls: 155 mmStroke length: 150 mmRotating speeds: 9.0 U/mintotal power requirement: 1.3 kWweight: 305 kgrange L-W-H: 900 x 700 x 1500 mmFeatures:- Robust electric-motor-driven ring/profile bending machine- Machine base frame with rear storage shelf- Can be used in both horizontal and vertical orientations- Equipped with a wide variety of roller sets Split roller segments Pipe rollers - Electro-hydraulic feed of the upper roller- Manually adjustable side/alignment rollers- 1 freely movable control panel - Base frame with forklift pockets For easy transportThe data for this ad was created with ModulMWS - the software solution of LogoT ...

I - beam section - flat steel: 120 x 20 (d 750) mmI-beam section - upend: 60 x 10 (d800) mmL-beam: 50 x 5 (d 1200) mmbar material - diameter: 35.0 (d 800) mmbar material dia. max.: 70 x 3.0 (1200) mm: 50.0 mmdiameter of upper rolls: 155 mmdiameter of lower rolls: 155 mmStroke length: 150 mmRotating speeds: 9.0 U/mintotal power requirement: 1.3 kWweight: 305 kgrange L-W-H: 900 x 700 x 1500 mmFeatures:- Robust electric-motor-driven ring/profile bending machine- Machine base frame with rear storage shelf- Capable of horizontal and vertical operation- Equipped with a wide variety of roller sets Split roller segments Pipe rollers- Manual feed of the upper roller- Analog position indicator for the upper rollers (scale)- Manually adjustable side/aligning rollers- Base frame with forklift pockets For easy transportThe data for this ad was created with ModulMWS - the software solution of LogoTe ...

: neu : 2025 : 090080 : prompt, Zwischenverkauf v : Türkei : 32100 €: 613.11 €: 1 : 3100 mm: 4 mm: 42 1/min: 1,5 °: 750 mm: 7.5 kW: 2 Stk.: 800 mm: 450 mm: 3700 mm: 2300 mm: 1350 mm: 3730 kgmot. back gauge with digitalreadout DT 5hold down with rubber padsside lay with T-sluts2 supporting armsball in the tabletape measuretilt stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6500 mmplate thickness: 3 mmback stop - adjustable: 1000 mmdimensions: 7300x2400x2300 mmWeight: 20000 kgEquipment/accessories:- 1 x set of knivesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

puncher: 55 tround bar steel: 40 mmsquare edge steel: 40 mmL-beam: 120 x 120 x 10 mmhole punching press: capacity (dia. x thick.): Ø 40 x 10 mmshear: flat material: 300 x 15 mmthroat: 250 mmwork stroke: 60 mmwork height max.: 1085 mmtotal power requirement: 4,0 kWweight: 1300 kgrange L-W-H: 2000 x 900 x 1800 mmEquipment:- Electro-hydraulic structural steel shears with 4 workstations Flat steel shears Structural steel shears Punch press Notching station- Driven by two hydraulic cylinders- Infinitely variable stroke adjustment- Support table at the hole-punching The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 6.0 mmcutting angle adjustment: 0.5 - 3.0 °down holder: 12 Stückno. of strokes: 8 - 14 Hub/minback stop - adjustable: 750 mmwork height max.: 770 mmControl: konv. total power requirement: 7.5 kWweight of the machine ca.: 3800 kg.range L-W-H: 2650 x 2100 x 1750 mm From a maintenance workshop Very good condition () Features- Robust, slide-guided electro-hydraulic panel shear- HACO control panelâfront left Easy operation directly at the cutting table Adjustment of cutting angle and backgauge Emergency stop button, latching - Electromotor-driven material stop/backgauge Fine adjustment with handwheel (front left)- Electro-hydraulic cutting angle adjustment- Manual cutting gap adjustment, from the front Eccentric adjustment - 1x long side stop - Front finger guard- 1x freely movable foot switch- Rear sheet metal chute- Operating instructionsThe data f ...

: neu : 090253 : November 2026, Zwischenve : Türkei : 21600 €: 414.72 €: 2550 mm: 2.5 mm: 35 1/min: 750 mm: 3 kW: 2 Stk.: 850 mm: 400 mm: 2860 mm: 1350 mm: 1200 mm: 1500 kgMotorized back gauge 750 mmPneumatic sheet supportHolddown with rubberMoveable foot switchSquaring arm2 supporting armsPhotocell-protection on the back sideUser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

 The FARROS BSA600 – KS1200 is a high-quality Swiss-engineered column and boom grinding system, specially developed for grinding, weld preparation, back gouging and surface finishing of large and heavy steel components.FARROS is a well-established Swiss manufacturer with decades of experience in industrial grinding technology. FARROS machines are internationally recognised for their robust construction, precision, reliability and long service life, even under demanding industrial production conditions.The BSA600 – KS1200 is particularly suitable for manufacturers of pressure vessels, boilers, large-diameter pipes, wind turbine towers, offshore structures, storage tanks and heavy welded steel constructions.The KS1200 grinding head is designed for demanding applications such as longitudinal and circumferential weld grinding, removal of weld reinforcement, back gouging, weld seam prepa ...

- Ram table size 1500 x 1600 mm- Lower Table 2200 x 2200 mm- Max. die height table to table 1600 mm

Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-38

Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-37

: neu : 2026 : 090203 : prompt, Zwischenverkauf v : Türkei : 3810 €: 1 : 1020 mm: 1.5 mm: 500 mm: 1950 mm: 1000 mm: 1150 mm: 420 kgwelded steel constructionwith manual hold down unitback gauge adjustable by handwheelusers manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090204 : prompt, Zwischenverkauf v : Türkei : 4290 €: 1 : 1250 mm: 1.5 mm: 500 mm: 2250 mm: 1000 mm: 1150 mm: 460 kgDEMO MACHINE - MINT CONDITIONwelded steel constructionwith manual hold down unitback gauge adjustable by handwheelusers manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3080 mmplate thickness: 16.0 mmthickness at Niro-steel: 12.0 mmcutting angle: 0.5 - 2.5 °no. of strokes: 7 - 12 Hub/minback stop - adjustable: max. 1000 mmtraversing speed: 200 mm/sekwork height max.: 840 mmdown holder: 14 StückColumn width: 3420 mmthroat: 350 mmControl: D-Touch 7 oil volume: 450 lengine output: 45.0 kWvoltage: 400 Vweight: 18150 kgrange L-W-H: 4130 x 2210 x 2570 mm Good / well-maintained condition () New price ~ €120.000 Special price upon requestFeatures:- Robust electro-hydraulic sheet metal shear (guided)- CNC control unit D-Touch 7 (touchscreen) Anti-reflective robust 7 color touchscreen control panel Easy positioning to the desired size Positioning accuracy 0.1 mm Unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target values Backgauge retraction function Cutting length control via adju ...

sheet width: 3100 mmplate thickness: 6.35 mmthickness at Niro-steel: 4.00 mmcutting angle: 0.5 - 2.5 °cutting gap adjustment: 0.05 - 0.8 mmno. of strokes: 12 - 50 Hub/minback stop - adjustable: 1000 mmControl: ELGO TYP 85 oil volume: 120 ltr.engine output: 13.0 kWweight: 6300 kg.range L-W-H: 3950 x 1950 x 1680 mm very well-maintained condition ()Equipment:- Electro-hydraulic guillotine shear with guided blade movement- ELGO NC Type 85 control unit Front control panel, swiveling (front left)- Electro-hydraulic cutting angle adjustment- Electro-hydraulic cutting gap adjustment- NC motorized backgauge With recirculating ball screws- 1x side gauge 2,000 mm ... with T-slot + mm scale- 2x front support arms 1,000 mm ... with mm scale- Recessed grips in the support table- Front finger guard- 1x movable foot pedal- Operating manualThe data for this ad was created with ModulMWS - the software so ...

sheet width: 2050 mmplate thickness: 10.0 mm STpre-bending: 8.0 mm STdiameter of upper rolls: ~ 220 mmside roll diameter: ~ 170 mmdiameter of lower rolls: ~ 190 mmbending speed: ca. 2.0 + 5.0 m/minControl: ELAP LYNX oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 5.5 kWweight: 5000 kgrange L-W-H: 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on requestEquipment:- Robust electro-hydraulic 4-roll plate bending machine- 4-roll design offers a wide range of bending and rolling capabilities- MG NC control unit ELAP LYNX Operation – control of all rolls and machine axes Digital position display Manual operation via joysticks Movable control panel- Two central rolls driven directly by hydraulic motors- Conical rolling possible via roll tilting- Side roll parallelism maintained via torsion shafts- Pre-bending on both ends- Diameters up ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 16600 €: 318.72 €: 1050 mm: 6 mm: 30 1/min: 2.3 °: 750 mm: 7,5 kW: 800 mm: 530 mm: 1355 mm: 1720 mm: 1630 mm: 1230 mm: 2000 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 4 cutting edges on the lower blade1000 mm squaring arm with scale, T-slot, and flip stop2 support armsMechanical downholderManual cutting gap adjustment on the frontBalls in the tableCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 25000 €: 480 €: 2050 mm: 6 mm: 30 1/min: 2.3 °: 750 mm: 7.5 kW: 800 mm: 530 mm: 2355 mm: 2720 mm: 1630 mm: 1230 mm: 3200 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 4 cutting edges on the lower blade1000 mm squaring arm with scale, T-slot, and flip stop2 support armsMechanical downholderManual cutting gap adjustment on the frontBalls in the tableCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 19800 €: 380.16 €: 1550 mm: 6 mm: 30 1/min: 2.3 °: 750 mm: 7,5 kW: 800 mm: 530 mm: 1855 mm: 2220 mm: 1630 mm: 1230 mm: 2900 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 4 cutting edges on the lower blade1000 mm squaring arm with scale, T-slot, and flip stop2 support armsMechanical downholderManual cutting gap adjustment on the frontBalls in the tableCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 16400 €: 314.88 €: 2050 mm: 3 mm: 35 1/min: 1.5 °: 750 mm: 3 kW: 800 mm: 520 mm: 2720 mm: 1575 mm: 1230 mm: 1900 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 2 cutting edges on the lower blade800 mm squaring arm with scale2 support armsMechanical downholderManual cutting gap adjustment on the frontCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 1020 mmplate thickness: 4 mmpre-bending: - diameter of upper rolls: 110 mmtotal power requirement: 2,2 kWweight of the machine ca.: 900 Kgdimensions of the machine ca.: 2,1 x 0,7 x 1,2 mFasti three-roll plate bending machine / plate rolling machineIn excellent condition. The machine was completely overhauled in 2016.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1998 : 090148 : prompt, Zwischenverkauf v : Belgien : 22800 €: 1 : 3100 mm: 6 mm: 0.5 - 3.5 °: 9.5 kW: 950 mm: 4070 mm: 2330 mm: 3400 mm: 1850 mm: 5500 kgMotorized backgauge 1000 mm, ball screws, digital displayCutting gap adjustment from the front with handwheelCutting length adjusmentCutting angle adjustmentDownholer safety guardRear safety via light barrierFoot pedalTable supports with ball bearings1 side arm 1500 mm2 support armsOperating manual in German with CE declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return polic ...

: gebraucht : 1996 : 090232 : ca. 2 Wochen ab Auftragse : Türkei : 16900 €: 1 : 3100 mm: 6 mm: 19 1/min: 1.5 °: 14 : 1000 mm: 15 kW: 200 l: 3700 mm: 2250 mm: 2700 mm: 1830 mm: 5600 kgSwing-beam cutting designMotorized backgauge (1000 mm) with digital displayFootpedalCentral manual blade gap adjustmentCutting line illuminationWide support table with transfer balls1 side gauge with scale, T-slot, and flip-stop2 sheet support arms with T-slotsOil fillLight curtains at the rear of the machineTHE BLADES WERE GRINDEDOperating manual in German with EC Declaration of ConformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demon ...

HAEUSLER Dishing press:- Max. force 1000 Ton- Retraction force 82.5 Ton- Approach speed 260 mm/Sec- Working 10 - 30 mm/Sec- Return speed 370 mm/Sec- Pressure 253 Bar - Distance between column 9000 mm- Dimensions table plate 1500 x 1500 mm- Max Work piece diameter 8700 mm- Thickness at yield 450 N/mm2 90 mm - Manipulator:- Max. dimanions 8700 x 90 mm- Min. dimensions table 1500 x 1500 = 3200 mm- Min. dimensions table 700 x 700 = 2200 mm- Work piece weight 42.000 Kg- Travelling speed 158 M/Sec- Power 165 kW- Weight 43000 Kg- Optional Dishing Dies (Gray GG-25)RUW 925 with    1500 diameter x R   950 – 1300 mmRUW 1205 with 1500 diameter x R 1305 – 1700 mmRUW  1520 with 1500 diameter x R 1705 – 2200 mmRUW 1905 with 1500 diameter x R 2205 – 2800 mmRUW 2395 with diameter 1500 x R 2805 – 3500 mmRUW 2885 with diameter 1500 x R 3505 – 4300 mmRUW 3515 with diameter 1500 x R 4305  ...

HAEUSLER FLANGING MACHINE HBM-HY 8700 x 90 mm - Forming and Flanging rollers:- inclines positon 0 - 25 Degrees- Rotation sopeed 0 - 200 M/Min- Rapid adjustment speed 2500 mm/Min- Crawling speed 0 - 1200 mm/Min- Sleeve hydro mechanical rapid speed 6000 mm/Min - Infeed carriage:- Work piece weight 42.000 Kg- Max. dished head 8300 mm- Min. dished head 1900 mm- Speed 20 M/Sec- Centering Automatic - Data of Workpiece:- Cold 360 N/mm2 45 mm- Hot 360 N/mm2 90 mm- Min Knuckel Radius 100 mm- Max. Knuckel Radius 1200 mm- Min thickness dished 10 mm- Head diameter without device 2600 mm- Head diameter with device       1900 mm- Length off straight flange at flanged head 3,5 x thicness = 140 mm - Hydraulic tank 2000 Liter- Power 350 kW- Form roller changing device in combi with lifgting sleeve- Auxiliary device for flanging heads from 1900 - 2600 x 25 mm thickness- Measuring device outer diam ...

chamfer lenght: 1530 mmplate thickness: mmdistance between columns: 1530 mmpressure: 40 tstroke length max.: 300 mmtravel -x axis: 500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1640 mmplate thickness: 3,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 1,60 tdimensions of the machine ca.: mManual and automatic bending cycles possibleBending angle adjustable via potentiometerClamping beam lift and material thickness selectable via switchesManual backgauge with spring fingersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.