trabalho de chapa metálica usadas para venda (3,234)

sheet width: 2540 mmplate thickness: 2,50 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 2,00 tdimensions of the machine ca.: mMotorized backgauge with flip-up stops, up to 1500 mmMultiple program sequences with varying bending angles and stroke heights possibleMultibend 2000 control systemGround bending beamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3240 mmplate thickness: 5,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 5,70 tdimensions of the machine ca.: mUpper Beam Stroke: 350 mmProgram control via touchscreen (back gauge, bending angle adjustment,upper beam stroke, sheet thickness, piece count, etc.)Motorized height adjustment of the bending beam(for sheet thickness setting)Manual and automatic modes availableControlled back gauge with spring-loaded fingersCentralized lubricationVarious additional bending and reinforcement railsOperating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 51100 €: 965.79 €: 3100 mm: 3.5 mm: Hydraulisch : 135 °: 4300 mm: 1770 mm: 1890 mm: 4520 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 1650 mmmaterial thickness: 3,00 mmno. of straightening rolls: 21 Control: sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 50 mmbetween stands ca.: 1720 mmrun-in height: 1250 mmtotal power requirement: 45 kWweight of the machine ca.: 24,50 tdimensions of the machine ca.: m6-HIGH LEVELER / Strip Leveler / with Quick-Change System- 18 Back-up Supports- Digital Roll Adjustment (0.01 mm resolution)- Gearbox renewed in 2021- Quick-Change SystemThe quick-change system is mounted on a sliding plate. This sliding plate—on which the leveling rolls as well as the entire back-up support assembly are mounted—can be extended, allowing for quick and easy roll replacement in an easily accessible position.The extension and retraction of the sliding plate are hydraulically actuated. Connection to the drive mechanism is automatic.- Intermediate RollsThe intermediate rolls preve ...

material width: 1500 mmmaterial thickness: 3,00 mmno. of straightening rolls: 23 between stands ca.: 1530 mmthickness min. approx.: 0,50 mmdiam. of the rolls ca.: 47 mmstraight. speed ca.: m/ minbarrel length ca.: 1560 mmtotal power requirement: 23 kWweight of the machine ca.: 9,00 tdimensions of the machine ca.: 4,30 x 1,80 x 2,60 mFeatures:- Maximum vertical roller spacing: 20 mm (Note: Scale only extends to 15 mm)- 5-point lower support with support rollers (individually adjustable)- 5-point upper support with support rollers- Lower roller crowning- Circulating lubrication for gearbox and universal shafts- Infeed and outfeed tables included- Reversible operation- Centralized grease lubrication for straightening roller bearings- MITSUBISHI ELECTRONIC frequency inverter- Drive motor: 22 kW- Drive motor features a simple On/Off switch- Oil pump features a simple On/Off switch- Manual he ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6400 mm: 1.5 mm: 2 mm: 6 ELECTROCINEMATIC DRIVE OF THE BENDING JOINTSmillmeter precise adjustment of the clamping beamBMS MULTI-Touchcontrolelectric powered rotary shearelectronic depth stopflexible material supportsinclined bending beamoptimized geometry of the clamping beamsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Extended depth 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request clamping beam made out of hardox price on requestPrices ex works Germany.Transport and commissioningat customers place on request.The data for this ad was created with ModulMWS - the software solu ...

: gebraucht : WA0147 : 890 €: 1 : 3050 mm: 105 mm: 85 mm(screwed 5x from above)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 9 kWWorking parameters: 110 t – Gooseneck 500 mm – Adjustable stroke 0 to 60 mm – Cadence 37 rpm (stroke 20 mm)Steel capacity 45 kg/mm²: Ø 40 × 14 mm – Ø 28 × 16 mmEquipment included: 20 sets of punches and dies Ø 8 to 27 mm – Semi-paxy stop capacity 1000 – Fagor numerical control Powersupply: Pump 28 l/min – 230 barYear & Manufacturer: 2007 – GEKADimensions (mm): 1300 × 1300 × 1850Weight (kg): 1715Remarks: Serial No. 10138 1955 included in the description. Auction-ID: A1-47421-16

- 3 rollers. - Roller length 1050 mm. - Roller diameter 65 mm. - Maximum length of the sheet to be bent approx. 1000 mm. - Maximum thickness of the sheet to be bent: 1.25 mm. - Minimum diameter to bend 85 mm. - New, unused machine. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-33

Sold with contents. Auction-ID: A1-47254-25

Serial number: 24550616Punching force: 200 kNConnection: 11 kVATable dimensions: 2450 x 1200 mmincluding accessories such as various punches and punching toolsReference: CES - Lot 107 Auction-ID: A7-46763-333

Automatic stirrup bending machine, 4 payoffs, double bending 8-12mm, single bending 8-16 mm, working hours 1322, very good condition Auction-ID: A7-47311-2

: WA0136 : 3150 €: 1 : 8 mm: 3 x 1.000 & 1 x 1.050 mmcomplete 30°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic stirrup bending machine, 1 payoff, double bending 8-12mm, single bending 8-14 mm Auction-ID: A7-47311-5

Batch that is part of a combination of batches Auction-ID: A1-47254-41

plate thickness: 1,25 mmworking length: 8100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: / mmcoil weight: / tcoil internal dia.: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic straigntening, bending and cutting machine up to 16 mm, 5 payoffs, 5 hyperbolic rotors, max cutting length 1200 cm Auction-ID: A7-47311-8

Automatic stirrup bending machine, 1 payoff, double bending 8-12mm, single bending 8-14 mm Auction-ID: A7-47311-4

Automatic straigntening, bending and cutting machine up to 16 mm, 5 payoffs Auction-ID: A7-47311-6

Automatic straigntening, bending and cutting machine up to 16 mm, 5 payoffs, 5 rotors, max cutting length 1600 cm Auction-ID: A7-47311-7

: neu : ca. 6 Monate ab Auftragse : Taiwan : 62000 €: 1171.8 €: 3100 mm: 2 mm: Hydraulisch : 135 °: 5 kW: 4370 mm: 1770 mm: 1790 mmWITH VERTICAL UPPER BEAM MOVEMENT FOR THE USE OF FLAT AND HIGH TOP RAILShydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp flat upper rail 45° (in one piece)mechanical crowning adjustmentclamping force adjustmentupper beam verticalaccording to CE rules Optionen: sectionet upper rail, height 100 mm motorized back gauge, 800 mm with 2-axis touch controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 33000 €: 630.3 €: 2530 mm: 6 mm: 6 mm: 4 mm: 190 mm: 5.5 kW: 4250 mm: 1200 mm: 1150 mm: 3750 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 19100 €: 366.72 €: 4000 kg: 1300 mm: 450 - 550 mm: 600 mm: 50 mm: 80 mmmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlALTERNATIVES (prices on request):Version with pneumatic pressure armVersion with brake, without motor, with or withaout pneumatic pressure armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-47249-228

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-47249-26

AXLE HOLE PUNCH Structure Three-part frame with column guides Drive punching axle pneumo-hydraulic Press force 490 kN Total press stroke: 100 mm Press stroke: 12 mm Cutting impact damping: hydraulic Max. travel cutting impact absorption 7 mm Required air pressure (factory) 6 bar max. tool size 880 x 880 mm min. tool size TBD Ejector function hydraulic Ejector stroke 10 mm Ejector force approx. 50 kN Tool Weight TBD Weight of the upper part of the mould TBD Diarrhea hole diameter 120 -150 mm Clamping tool adapter plate according to template drawing Infeed height top table top 155 mm Adjustment of infeed height due to tool regrinding 0 to -15 mm Disposal of stamping waste. through the table into a box Diameter of punching waste. .. 25 -50 mm Disposal of scrap metal in DLR in crate Manual tool installation Tool clamping manual Pitch circle diameter ejector quills (min -max.) 250 to 500 mm  ...

Hydraulic press for crimping hydraulic hoses, equipped with all the necessary dies for 0 hoses. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-47249-60

sheet width: 3050 mmplate thickness: 2.5 mmthickness at Niro-steel: 1.5 mmno. of strokes: max. 35 Hub/mincutting angle: 2°10 table height: 905 mmtable width: 390 mmback stop - adjustable: ca. 750 mmControl: konv. engine output: 3.0 kWweight of the machine ca.: 1750 kgrange L-W-H: 3730 x 2070 x 1400 mm New price approx. 45.000 euros () Special price on requestEquipment:- robust / motorized swing cut guillotine shears- Machine with electric material / backgauge Traverse path approx. 750 mm (infinitely variable adjustment range) analog position indicator Manual adjustment from the front- unbreakable and torsion-free welded steel construction- Compact and clear machine construction- 1x hold-down beam- Integrated sheet holding system for thin sheet blanks- sheet/cut material removal at the front (operator side)- 1x side stop with mm scale- Extendable table extension (approx. 350 mm)- 1x free ...