trabalho de chapa metálica usadas para venda (3,250)

This 8s AMADA HRB 1003 press brake was manufactured in 2023. It features a press force of 1000 kN and a stroke of 250 mm, making it suitable for various applications. With a weight of 7200 kg and a control system of AMNC3i with Lite Mode, it offers advanced capabilities. Consider the opportunity to buy this AMADA HRB 1003 press brake. Contact us for further details.

A four-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible.

A Boschert notching machine with an integrated punching station is available. Cutting angle range: 30°-120°, punching capacity: 15t, punching diameter range: 9.19mm-91.87mm, cutting length range: 53.85mm-53.46mm, max. sheet thickness: 10mm, punching force: 15t, stroke rate: 40/min, table dimensions X/Y: 1000mm/650mm, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1200mm, weight: approx. 2000kg. Documentation vorhanden. An on-site inspection is possible.

Key data: 3140 mm, 1 mm

novas tesouras guilhotina motorizadas Schechtl, com o seguinte equipamento: - dentro da UE: ficha de ligação de 32 amperes com cabo de 5 m - 1 par de facas de tesoura de aço (de um só gume) - Registo manual de profundidade 0-750 mm com mesa basculante pneumática, Deitado para a frente - Placas de suporte com graduação de 10 mm e fita métrica - Pedal - Jaula de segurança de três lados à volta do travador de profundidade - Ar comprimido deve estar disponível: mínimo 6 bar, máximo 10 bar - aprox. 50 l/min - Iluminação por corte - Ecrã eletrónico de posição - Contador de golpes de contacto tico 731.3 - Carro empilhador de chapa metálica leve máximo, capacidade de carga 300 kg Comprimento de trabalho 3140 mm Aço com espessura de chapa 20 1,5 mm 30 Sheet espessura Alu 2,25 mm 40 Blechdicke VA/Folha de espessura de aço inoxidável 1,0 mm 50 Maschinen ...

Comprimento máximo de corte: 1040 mm Espessura máxima da chapa: 4 mm de aço Bitola de fundo manual até 550 mm Extensões de batente lateral e de mesa Faca afiada 1700 kg

An asymmetrical three-roll plate bending machine MG is available. Working width: 2000mm, roller diameter: 130mm, max. plate thickness: 3mm, power: 6kW, weight: approx. 2000kg. An on-site inspection is possible.

Quantidade: 1 Laminador 20-Hi Sendzimir em segunda mão Fabricação: SUNDWIG, PAULY, ABB, Schneider Tipo: 20-HI – WV 20 Construído: 1988 Reformulação: 2018 Mecânica e elétrica, incluindo novo AGC e medidor de espessura de raios X Largura da tira: 300 – 670 mm Espessura: 0,8 mm Saída: 0,01 mm Velocidade de rolagem: 300/500 m/min. Materiais de laminação: Aço inoxidável, cobre, invar, níquel, aço Si, Mo, Ti

Amplificador servo Trumpf Nova Peça

Truma Bend V85X 2 metros de largura, 2,90 de altura Ano de fabrico 2005 25.000 horas

A repair-required CNC press brake Amada is available. Press force: 1000kN, max. stroke: 200mm, working width: 3100mm, passage: 2690mm, throat depth: 400mm. Machine dimensions X/Y/Z: approx. 3600mm/2100mm/2600mm, weight: approx. 6500kg, operating hours: approx. 37661h. The cylinder control has a defect. Documentation available. An on-site inspection is possible.

This 3-axis TRUMPF TruLaser 5030 was manufactured in 2012. It features a powerful 6,000 W laser and is equipped with a HANDTE MF-L 2000 extraction system. The machine has been completely freshly serviced and has a total of 20,118 laser hours. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 CO2 laser cutting machine we have for sale. Contact us for further details.

plate thickness: 4 mmroll diameter: 125 mmthroat: 200 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,48 tdimensions of the machine ca.: 1,6 x 0,6 x 1,2 mmExhibition machine, unused.• 5 speeds• Foot control• Brake motor• Emergency stop• Hydraulic roller adjustment• Special tool setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref.No. 00909 Nome da fábrica: Linha de endireitamento de aço em tiras Fabricante: Werner Müller Stanz Umformtechnik Tipo BRMU- 065 – 01 – 05 Com marca CE Ano de construção: 2010 Horas da máquina: 3500 h Largura máxima do cinto: 120mm Espessura do material no máximo 5 mm Espessura do material mínimo (aço) 0,7mm Velocidade máxima 30m/min Potência do motor 2,4 kW Diâmetro do rolo de endireitamento 65mm Diâmetro do rolo de alimentação 97,5mm Velocidade de avanço +- 1mm Condição técnica Ok Data de submissão imediata

Key data: 1020 mm

Tesouras guilhotina manuais com batente ajustável (70 - 500 mm), tesouras apoiadas numa estrutura de aço, A máquina é vendida em condições existentes, sem controlo funcional, ou seja, a máquina Não será ultrapassado por nós Comprimento de trabalho: 1020 mm Aço com espessura da chapa: 0,75 mm Espessura da folha alumínio: 1,50 mm Cor: cinzento Peso da máquina: 150 kg Dimensões: 1700 x 550 x 1400 mm Manual de retenção

Linha longitudinal cortada ao comprimento para a indústria da chapa metálica 1.500 x 1,5 mm Largura do cinto: 1.500 mm Espessura da banda 0,4 -1,5 mm Secções longitudinais 3 Peso da bobina 3.000 kg# Velocidade 15 m/min. 3 desenroladores Máquina muito bem mantida, imediatamente pronta a usar, ex-site

Olá, Oferecemos-lhe aqui uma tesoura de chapa usada para placas manuais, Bernardo, tipo HLS 1050 x 2.0. Fabricante Bernardo, PWA Handels ges. M.B.H. Tipo HLS 1050 x 2.0 Ano de construção 05/2023 Máquina nº PWA-230114 Comprimento de corte 1050 mm Espessura máxima da chapa (aço 400 N/mm²) 2,0 mm Ajuste de bitola inversa de 0 a 600 mm Ajuste do batente de mesa 95 a 450 mm Tamanho da mesa 1300 x 600 mm Altura de trabalho aproximadamente 765 mm Dimensões da máquina: 2000 x 1040 x 1600 mm Dimensões do transporte: 1900 x 1050 x 1120 mm Peso da máquina: 500 kg Acessórios opcionais incluíam: Bitola traseira 600 mm Dispositivo de fixação com abraçadeira rápida Nota: Os dados técnicos acima referidos foram retirados de brochuras do fabricante ou de outras fontes, para as quais não podemos garantir a sua precisão e completude. Âmbito de entrega ...

This 3-axis TRUMPF Trumatic L 3050 was manufactured in 2006. It features a powerful 6,000 W CO₂ laser and a generous working area of 3,000 × 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 3050 CO₂ laser cutting machine we have for sale. Contact us for further details.

This 3-axis TRUMPF TruLaser 3030 was manufactured in 2007. It features a powerful 4,000 W CO₂ laser and a working format of 3,000 × 1,500 mm, making it suitable for various cutting applications. With a connected load of 88 kVA, this machine is designed for efficiency and reliability. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details.

This 3-axis TRUMPF Trumatic 600L was manufactured in 1996. It features a maximum punching force of 220 kN and a laser power of 1,500 W, making it suitable for various applications. With a machine weight of 18,000 kg, it offers robust performance. If you are looking to get high-quality punching and laser capabilities, consider the TRUMPF Trumatic 600L punch-laser combination we have for sale. Contact us for further details.

This 3-axis TRUMPF Trumatic L3050 was manufactured in 2004. It features a working range of 3,000 x 1,500 x 115 mm and a maximum workpiece weight of 900 kg. The machine is equipped with a powerful 6 kW CO2 laser, capable of cutting through materials up to 25 mm thick for iron and stainless steel, and 15 mm for aluminum. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details.

Key data: 3000 mm, 10 mm

Tesouras de guilhotina hidráulica - máquina de encomenda (prazo de entrega aprox. 10-14 semanas) - inclui interruptor de pé, ecrã tátil, sala de instalação traseira com monitorização de barreira de luz, automática/elétrica de corte de folga, automática/elétrica de ângulo de corte, dispositivo hidráulico de fixação, mot. Bitola de fundo até 1000 mm de profundidade -Semelhante às ilustrações- Máquina de corte de chapa hidráulica - máquina de encomenda (prazo de entrega aprox. 10-14 semanas) - inclui interruptor de pé, ecrã tátil, área de configuração traseira com monitorização de barreira de luz, folga de corte automática/elétrica, ângulo de corte automático/elétrico, fixação hidráulica, mot. Bitola de fundo até 1000 mm -imagens semelhantes-

Key data: 3200 mm, 6 mm

Máquina hidráulica de curvatura giratória, coroação dinâmica hidráulica, ecrã tátil, regulação de pressão da viga superior, mot. Bitola de fundo (1000mm), eletricidade/hidr. Ajuste da viga de flexão

Sheet stop: 1000mm, max. cutting thickness: 10mm, cutting length: 3000mm, weight: approx. 8500kg. The machine complies with accident prevention regulations. The blades must be turned and reground. The drive motor was replaced 4 years ago. Documentation available. An on-site inspection is possible.

This AMADA EMZ 3610 NT was manufactured in 2008. It features a press force of 300 kN, can handle material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine includes 45 turret stations with auto-index and achieves a stroke rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information.

This 3-axis Baublys Control Laser UL 65QR/NC 100 50 50 SOMA was manufactured in 2008. It features a Q-switched solid-state Nd:YAG laser, capable of reaching frequencies up to 50 kHz. The machine includes a round transfer table of approximately 75 cm and is housed in a 2.4 x 2.6 meters enclosure. If you are looking to get high-quality laser marking capabilities consider the Baublys Control Laser UL 65QR/NC 100 50 50 SOMA machine we have for sale.Contact us for more information.

Plasma cutting machine manufactured in 2021. This Hypertherm HPR170 machine features a sturdy construction capable of handling up to 100 mm material thickness and high-quality linear guides for precision. With digital, maintenance-free AC servos, it offers impressive speeds of up to 40,000 mm/min. Consider the opportunity to buy this Hypertherm HPR170 plasma cutting machine. Contact us for further details.

This ESAB Suprarex HD 4000 plasma cutting machine was manufactured in 2021. It features a track width of 4000 mm and a track length of 12000 mm, supporting a maximum working length of 9000 mm. The machine is equipped for both oxyfuel and plasma cutting, handling material thicknesses up to 200 mm. If you are looking to get high-quality cutting capabilities, consider the ESAB Suprarex HD 4000 machine we have for sale. Contact us for more information.

This 5s TRUMPF TruBend 5085 was manufactured in 2012. It features a press force of 850 kN and a bending length of 2,210 mm, making it suitable for various bending applications. With an operating interface of Touchpoint TruBend, it offers user-friendly operation. Consider the opportunity to buy this TRUMPF TruBend 5085 press brake. Contact us for further details.

This 5-axis Bystronic Xpert 250/3100 press brake was manufactured in 2014. It features a press force of 2500 kN, bending length of 3100 mm, and a throat depth of 400 mm. The machine includes a robust 22 kW main motor and operates with high precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 250/3100 machine we have for sale. Contact us for more information about this machine.

This Hesse AD-S 30175 press brake was manufactured in 2017. It features a robust 3050 x 175 TON capacity, a stroke of 265 mm, and operates on a supply voltage of 3 x 400 Volt. Weighing 10830 kg, it ensures stability and precision in operation. If you are looking to get high-quality bending capabilities, consider the Hesse AD-S 30175 machine we have for sale. Contact us for more information.