trabalho de chapa metálica usadas para venda (3,233)

plate thickness: 3-4 mmpressure: 0 tCutting length: 220 mmtable height: 900 mmquantity of oil: 35 lTable dimensions: 950 x 790 mmtotal power requirement: 4 kWweight of the machine ca.: 0,95 tdimensions of the machine ca.: 1,0 x 0,86 x 1,2 mFoot switch angle adjustment 30°-140° automatic cutting gap adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 220 kNsheet thickness - max.: 8 mmtravel -x axis: 2500 mmtravel -y axis: 1250 mm: 90 m/min: 60 m/min: 108 m/min: 360 °/secpunch diameter: 76,2 mmworkpiece weight: 150 kg: 0,01 mm bzw. 0,01° : 15 Stücktool changing time: 1,5 - 6,5 secweight of the machine ca.: 11.050 kgdimensions: 6400 x 5800 x 2100 mmWorking hours: 30.430 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate length: 1250 mmplate thickness: 8 mmPunching capacity: 220 kNNumber of working hours: 51.658 htotal power requirement: kWweight of the machine ca.: 11.050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Decoiler Decoiler with arm: 1,5 ton Material width: 350 mm Coil exterior diameter: 1.200 mm Expansion range: 370 - 430 mm Speed: 0 - 20 m / min Leveller / Straightener Material width : 250 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 30 mm Material thickness: 0,5 - 6 mm Cross section: 1.200 mm Feeding speed: 20 m / min Required power: 18 kW

sheet width: 3200 mmplate thickness: 3.0 mm STthickness at Niro-steel: 2.0 mmOpening width / upper beam: 300 mmspeed: OW 40.0 mm/secBending beam adjustment: 80.0 mmspeed: BW 90.0 Grad/secwork height max.: 900 mmcontrol: MULTIBEND 5000 back stop - adjustable: 10 - 1550 mmaccuracy +/-: 0.1 mmair pressure: 5.0 barNumber of working hours: ca. 1.000 htotal power requirement: 2x 4.0 kWvoltage: 400 Vweight: 4400 kgrange L-W-H: 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours () good condition () Special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=VP6emx4HTYM! Maximum flexibility when bending cassettes, boxes and profiles! High flexibility in bending part design! High productivity and throughput! Easy to useEquipment:- motorized universal swivel bending machine RAS 73.30 high-precision mechanics with  ...

sheet width: 1350 mm: 3 mmsheet thickness for stainless steel: 1,5 mmrear stop: 600 mmtotal power requirement: 3 kWweight of the machine ca.: 1150 kgdimensions: 2030 x 1940 x 1220 mmStandard equipment:- All-steel welded construction with static and dynamic frame rigidityframe rigidity- Direct drive with brake motor- Specially alloyed cutting blades- 750 mm motorized, digitally adjusted backgauge with ball screwsrecirculating ball screws- Manual blade gap adjustment system- Mechanical sheet clamping system with plastic base- Work table with insert plates- foot switch for single and repeat cutting cycles- 1 x squaring arm 1000 mm long with metric scale- 2 x 800 mm front material support arms- Front stop- Finger protection - front and rear covers- Rear light guards- CE declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

engraving field: 120 x 120 mmtable-size: 250 x 250 mmworkpiece weight: max 50 kgControl: Fobagraf machine weight ab.: 1000 kgmachine frame made of welded steel constructionCross slide, hard stone design, table top with steel stop ironHeight-adjustable laser headQuality-switched ND: YAG laser head, lamp-pumped, 100 WDeflection unit mounted on the laser head (with standard lens)Z-axis with gearbox and servo driveServo axis control with X-, Y-, and Z-axesWater-cooledControl: Fobagraf user software packageOperating system: Windows 2000operating hours: 17.388 hmanual includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 2 mmthickness at Niro-steel: 1,25 mmno. of strokes: 63 Hub/mincutting angle: 1,13 °table height: 750 mmtable width: 320 mmback stop - adjustable: 5,0-550 mmtotal power requirement: 3 kWweight of the machine ca.: 1300 kgEquipment:- manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range- 1x long side stop- 3x support arms- Free-moving foot switch- Sheet holding device for thin sheet blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 2 mmthickness at Niro-steel: 1,25 mmno. of strokes: 63 Hub/mincutting angle: 1,13 °table height: 750 mmtable width: 320 mmback stop - adjustable: 5,0-550 mmtotal power requirement: 3 kWweight of the machine ca.: 1600 kgEquipment:- manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range- 1x long side stop- 3x support arms- Free-moving foot switch- Sheet holding device for thin sheet blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3020 mmplate thickness: 5 mmdistance between columns: 3020 mmControl: Simatec OP7 stroke: 450 mmback stop - adjustable: 1000 mmwork height max.: 900 mmtotal power requirement: 22 kWweight of the machine ca.: 9000 kgdimensions of the machine ca.: 4200 x 1600/2900 x 2000 mmFeatures:- Motorized backstop, 1000 mm- Motorized upper crossbar adjustment- Motorized lower crossbar adjustment- Side protection- Foot switch- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mmplate thickness: 4 mmwork height max.: 900 mm: 450 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4800 kgdimensions of the machine ca.: 4250 x 1500 x 1850 mmEquipment:- electric bending angle adjustment- electric upper beam adjustment- foot switch- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3240 mmplate thickness: 2,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 3,00 tdimensions of the machine ca.: mManual and automatic bending operation possibleBending angle adjustable via potentiometerUpper beam stroke height and material thickness selectable via DIP switchesBending rail and machine in excellent conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 6 mmrear stop: 10-1000 mmcutting angle: 0,5 - 2,5 °down holder: 20 Stkno. of strokes: 14 - 23 Hub/minwork height max.: 900 mmoil volume: 140 ltotal power requirement: 11 kWdimensions of the machine ca.: 4000 x 2150 x 1900 mmweight: 7800 kgEquipment:- ELGO control unit type P50- Automatic cutting angle adjustment- Automatic cutting gap adjustment- electric back gauge- Pneumatic sheet holding device- Light barrier behind the machine- 4 support arms- front finger guard- foot switch- Angle stop 0 - 180- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 34 mmsquare edge steel: 30 x 30 mmL-beam: 100 x 10 mmflat steel: 100 x 14...160 x 11 mmblade length: 175 mmT-beam: 100 x 10 mmnotching: l + T material: 10 mmhole punhing press: pressure: 45 tthroat: 305 mmtotal power requirement: 3 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1,4 x 0,8 x 1,5 m 5-fold combinated profile steel shear incl. flat steel shear profile steel shear bar steel shear notcher hole punch 2 foot switches contact limit stop various punching saddles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6.5 mmthickness at Niro-steel: 5.0 mmangle adjustable from - to: 30 - 140 Gradno. of strokes: ca. 50 Hub/mintable:: 950 x 1030 mmblade length: 220 x 220 mmtotal power requirement: 4.0 kWweight: 800 kgrange L-W-H: 1100 x 950 x 1280 mm current new price approx. 20.000 euros good condition () special price on requestEquipment:- electro-hydraulic notching machine- multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools- manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment- large / stable work table- 2x new angle stop, adjustable- automatic cutting gap adjustment- 1x freely movable foot switch- connection cable + 16A plug- cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VAThe data for this ad was created with ModulMWS - the software solution of LogoTe ...

sheet width: 2040 mmplate thickness: 3,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 2,30 tdimensions of the machine ca.: mManual and automatic bending operation possibleBending angle adjustable via potentiometerUpper jaw stroke height and material thickness selectable via DIP switchesManual backgauge with spring fingersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 45 mmsquare edge steel: 45 mmL-beam: 12 mm: 40 flat steel: 450x15 mmL-beam 90°: 152x152x13 mm: 45 mmsquare edge steel: 45 mm: 12 mmweight of the machine ca.: 2323 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table width: 6000 mmtable length: 2000 mmburner heads: 1 Equipment:- Plasma source Kjellberg Hi Focus 161i- suction unit- CompressorTechnical dataKjellberg Hi Focus 161i plasma cutter:Cutting current at 100 % ED 10 - 160 AMarking current 5 - 25 ACutting range 0.5 - 50 mmPiercing up to 30 mmDimensions (L x W x H) 985 x 570 x 1140 mmMass 206 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 tworkpiece diameter: 1500 - 3500 mmdrum diameter: 250 x 100 mmfeed: 100 - 1400 mm/mintotal power requirement: 0,75 kWweight of the machine ca.: 2,5 tDimensions (LxWxH): 2,5 x 1,5 x 1,5 mRoller stand- Self-aligning- Forward/reverse rotation- New control system- Foot pedal- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 4 mmweight of the machine ca.: 6.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,7 mmroll diameter: 50 mmDimensions (L/W/H): 1600 x 600 x 1500 mmweight of the machine ca.: 400 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: tplate thickness: mmno. of strokes: Hub/mintotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4 mmcutting angle adjustment: 30-120 °table height: 900 mm: 407 weight of the machine ca.: 760 kgdimensions of the machine ca.: 1300x1000x1150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. working width: 1000 mm workable material thickness: 0,5 - 50 mm Total power: 82 A Total current consumption: 44,5 kW Insulation class: IP 42 Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3800 kg

sheet width: 4200 mmplate thickness: 14 mmpre-bending: 10 mmroll diam. toproll: 340 mmroll diam. bottom roll: 310 mmspeed: - m/minControl: Davi CNC total power requirement: - kWweight of the machine ca.: 11 tdimensions of the machine ca.: 6,5 x 1,75 x 1,65 m- DAVI CNC control- pre-Bending- Hydraulic 4-roller drive- Side roll diameter: 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 3120 mmdown holder: 14 Stückcutting angle: 1°5 no. of strokes: 14 Hub/mincontrol: ENC 100 table width: 500 mmwork height max.: 880 mmoil volume: 170 ltr.total power requirement: 11.0 KWweight: 5550 kgrange L-W-H: 3750 x 1950 x 1650 mm Machine was used for ALU processing no heavy sheet metal processing good condition (!) new price ~ 32.000 Euro----------------------------------------------------Swing cut guillotine shear with fixed cutting angle with DURMA ENC 100 NC control unit manual cutting gap adjustment from the front----------------------------------------------------Equipment:- electro-hydraulic guillotine shears swing cut- with DURMA ENC 100 NC control unit Backgauge preselection - X axis Number of pieces (in automatic mode) Control panel, front left Retraction from backgauge on/ ...

x-travel: 4216,0 mmy-travel: 2007,0 mmz-travel: 305,0 mmcontrol: CNC table-size: 4902,0 x 2134,0 mmmax. workpiece weight: 1465 kg / m²machine weight ab.: 2500 kgtotal power requirement: 30 kWdimensions of the machine ca.: 5486,0 x 3708,0 mmThe compact waterjet cutting system in bridge design consists of a torsion-resistanttorsion-resistant steel construction, which is coated with a special durable anti-corrosion coating.coating. Both the two X-axes and the particularly high Y-axis are based on theY-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system.specially developed by OMAX for the special requirements of a waterjet cutting system.Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pi ...

tube diameter: 42.0 x 3.0 STAHL mmtube diameter: 30.0 x 2.0 EDELST mmbending angle max.: 180 °bending radius max.: 100 mmbending speed: 2.0 U/min.Control: NC voltage: 400 Vtotal power requirement: 0.55 kWweight of the machine ca.: 115 kg Current new price approx. 4.200 Euro Very good condition / with machine baseDescription:- NC electro-motor tube bending machine - mandrelless up to 50 programs can be stored- Automatically returns to the starting position- Maximum bending capacity for 42 x 3.0 mm steel tubes- Excellent bending quality with very tight bending radii (from 2x tube diameter). and bending angles between 0° and 180°- Easy operation- High accuracy and reliability- Quick tool change (within seconds)- Easy to transport- Includes machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60.3 x 4.5 mm STtube diameter: 60.3 x 5.4 mm ALUtube diameter: 2 x 3.91 mm GASbar material - diameter: 35.0 mmrevolutions per minute: 2.0 U/minbending radius min.: 10.0 mmbending radius max.: 270 mmexternal diameter: min. 5.0 mmexternal diameter: min. 1/8 Zollvoltage: 230 Vtotal power requirement: 1.5 kWweight: 76.0 kgrange L-W-H: 302 x 243 x 674 mmEquipment:- mandrel-less tube bending machine- Model M = ELECTRO-HYDRAULIC SINGLE-PHASE- high performance and compact design- completely hydraulic machine- bends 210° without the need to catch up- no electronic control- Ercolina patent n. 102017000142179- control of the bending angle via adjustable angle scale- mobile machine base BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 0900 mmplate thickness: mmdistance between columns: 900 mmpressure: 20 tcolumn arm: 230 mmstroke length max.: 150 mmtravel -x axis: 350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.