trabalho de chapa metálica usadas para venda (3,363)

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm: 27 mm: 27 mm: 18 mm: 23 mm: 20 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21900 €: 420.48 €: 80 to: 285 mm: 300x25 mm: 750x1425 mm: 300 mm: 105 mm: 10 mm/s: 10 mm/s: 10 kW: 930 mm: 1430 mm: 750 mm: 1450 mm: 1700 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090237 : prompt, Zwischenverkauf v : Polen : 7950 €: 153.44 €: 1 : 47 to: 110 mm: 27 mm: 25x18 mm: 8 s: 16 mm: 700 bar: 479 mm: 135 mm: 388 mm: 117 kgMOBILE HYDRAULICS-POWERSTATIONDouble action - fully automated process of punching and returnWide range of hole diameters up to 27mmIntelligent control system with inching and automatic load detectionMode indicator lightProtection against accidental start-upOPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 12460 €: 239.23 €: 60 mm: 500 mm: 760 mm: 1000 mm: 186 kg: 10 cm³: 60 x 4 mm: 2 x 3,91 mm: 60 x 4 mm: 60 x 2 mm: 60 x 3 mm: 60 x 6 mm: 64 x 6 mm: 64 x 6 mm: 63 x 4 mm: 50 x 4 mm: 35 mm: 35 x 35 mm: 60 x 20 stehend, 60 x 35 mm: 380 mm: 10 mm: 10 mm: 1,5 / 3 U/min: 1.5 kWquick-change tooling systemdigital display of bending anglematerial spring back compensationfoot pedal for hands-free operationaccurate counterbending die positioningusers manualtools not included, priced on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 00821 : prompt, Zwischenverkauf v : 1210 €: 1 : 805 mm88°, R=0.6MM H=115MM, Split into left horn section 100/370/10/15/20/40/50/100/100 mm, right horn section, made from 42CrMo4 tool steel, induction-hardened to 54-60 HRC,polishedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 15900 €: 305.28 €: 50 - 60 mm: 180 mm: 180 mm: 180 mm: 3 : 3.75 kW: 6 m/min: 60x10 mm / 500 mm, 20x5 m : 80x20 mm / 500 mm, 50x5 m : 32x32 mm / 400 mm, 12x12 : Ø 35 mm / 350 mm, Ø 10 mm : Ø 60x2 mm / 600 mm, Ø 15 : 50x25x3 mm / 450 mm, 20x1 : 45x3 mm / 600 mm, 20x2 mm : 60x60x6 mm / 650 mm, 30x3 : 50x50x5 mm / 550 mm, 30x3 : UPN 80 / 600 mm, UPN30 / : UPN 65 / 600 mm, UPN 30 / : IPN 80 / 600 mm : 1200 mm: 850 mm: 1200 mm: 955 kg3 mech. driven rolls (brake motor)hardened shafts lower rolls hydraulic adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdigital read out for the position of the lower rollsmachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31600 €: 603.56 €: 2050 mm: 6 mm: 6 mm: 4 mm: 4 mm: 3 mm: 150 mm: 150 mm: 130 mm: 1,5 / 6 m/min: 4 kW: 4250 mm: 960 mm: 1100 mm: 2800 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recommende ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 49600 €: 947.36 €: 130 to: 600 mm: 5 : 2 : 50x18 mm: 80 mm: 600x18 (max. 600x20 mit D mm: 120x120x11 (max. 150x150x mm: 45/40 mm: 130x12 mm: 250x12 mm: 15 kWhydraulic drive2 foot pedals for independant working on punching and section stationbending unit with 2 dies, V50 and V90flat steel stationWITH DEVICE FOR REDUCING DEFORMATIONangle iron station with round and square bar cuttingtriangular notching station with table and gaugepunching station with table and gaugegauge 1000 mm with contact switch, for angle / flat steel stationoperating manual in German and EnglischThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090120 : prompt, Zwischenverkauf v : Türkei : 7500 €: 144.75 €: 1 : 1 : 1050 mm: 3 mm: 90 mm: 6 m/min: 1.1 kW: 1630 mm: 700 mm: 1200 mm: 480 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rollHARDENED ROLLStiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMANThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 2 mmthickness at Niro-steel: 1,25 mmno. of strokes: 63 Hub/mincutting angle: 1,13 °table height: 750 mmtable width: 320 mmback stop - adjustable: 5,0-550 mmtotal power requirement: 3 kWweight of the machine ca.: 1300 kgEquipment:- manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range- 1x long side stop- 3x support arms- Free-moving foot switch- Sheet holding device for thin sheet blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1550 mm: 2,0 mm: 1,5 mmroll diameter: oben 90 mm: 560 kg: 2580 x 700 x 1250 mm mm- 2 central rollers driven by an electric motor- Swing-out upper beam- Conical bending device- separate control panel- self-braking main motor- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized rear roller adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60 mmwall strength: 6 mmbending radius min.: 180 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1300 tdimensions of the machine ca.: 3500 x 1250 x 1300 mDescription:Round tube steel (S235): 60.0 x 6.0 mmRound tube stainless steel (S 355): 60.0 x 4.0 mmSquare tube steel: 50 x 50 x 4.0 mmRectangular tube steel: 60 x 40 x 2.0 mmmax. usable length: 3048 mmBending speed: 10°/secincluding tools (see photos)Mandrel is no longer available, can be retrofittedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 51900 €: 980.91 €: 120 mm: 390 mm: 3 : 15 kW: 2/7,5 m/min: 125x25 mm / 1.200 mm, 30x : 200x50 mm / 1.000 mm, 100 : 65x65 mm / 750 mm, 20x20 : Ø 80 mm / 850 mm, Ø 20 mm : Ø 160x4 mm / 2.800 mm, Ø : 120x40x4 mm / 1.800 mm, 3 : 90x90x5 mm / 1.800 mm, 30 : 120x120x12 mm / 1.200 mm, : 100x100x10 mm / 1.200 mm, : UPN 220 / 1.000 mm, UPN 1 : UPN 220 / 1.200 mm, UPN 1 : IPN 220 / 1.000 mm, IPN 8 : 2000 mm: 1650 mm: 1900 mm: 4450 kg3 rolls driven (hydromotor and planetary gearbox)shafts made of special steel,hardened and groundhydraulic adjustment of the 2 lower rollshardened universal rollslateral rolls hydraulic adjustable in 3 axeshorizontal and vertical operationmobile operating panel2 working speedsdigital read out (3 axes)machine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 210 REFERENC ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 34200 €: 653.22 €: 100 mm: 315 mm: 3 : 7.5 kW: 7 m/min: 100x20 mm / 800 mm, 30x10 : 200x30 mm / 1.200 mm, 160 : 60x60 mm / 750 mm, 15x15 : Ø 75 mm / 800 mm, Ø 15 mm : Ø 125x2,5 mm / 1.400 mm, : 100x40x4 mm / 1.300 mm, 2 : 80x80x5 mm / 1.500 mm, 25 : 100x100x12 mm / 1.000 mm, : 100x100x10 mm / 1.000 mm, : UPN 180 / 900 mm, UPN 30 : UPN 180 / 1.000 mm, UPN 3 : IPN 180 / 1.000 mm, IPN 8 : 1465 mm: 2000 mm: 1700 mm: 4000 kg3 hydr. driven rollsstrong welded steel constructionlower rolls hydr. adjustabledigital read-out for lower rollspositions on seperate control panellateral rolls adjustable in 3 axeshorizontal and vertical operationfor- and backward drivemachine and equipment according to theCE regulationsWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 4 mmweight of the machine ca.: 6.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mmplate thickness: 4.5 mmpre-bending: 4.0 mmroll length: 1550 mmmin. dia.: ca. 190 mmroll diam. toproll: 140 mmbending speed: 3.0 m/minengine output: 2.2 kWweight: 1420 kgrange L-W-H: 2700 x 750 x 1000 mmEquipment:- robust electro-mechanical round bending machine- 2x central rollers driven by electric motor (upper & lower roller)- upper roller can be swiveled out manually, with folding bearing- including conical bending device- freely movable control panel- lower roller can be adjusted manually, using a handwheel- asymmetrical roller arrangement- self-braking main motor- safety device (safety line with switch unit)- CE mark/declaration of conformitySpecial equipment included in the price:- hardened rollers- motorized side roller adjustment- digital position display for motorized adjustable side rollerThe data for this ad was created with ModulMWS - the software solution ...

flat steel: 350 x 15 mmround bar steel: 35 mmsquare edge steel: 30 mmL-beam: 80x80x8 mmhole diameter in sheet thickness: Ø 27 in 13 / Ø 20 in 18 mmblade length: 356 mmengine output: 3.0 kWStroke rate: 34 Punching capacity: max. 500 kNweight: 950 kgdimensions: 1300x1100x1850 mmStandard equipment:- Knife set for flat steel- Complete knife set for angle steel shears- Complete normal punching equipment- Quick release device for punches up to 31 mm- Support table for punching device, rectangular notching and flat steel shears- Bending stamp with matrices V 40 and V 70- Electric contact stop (1.000 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3030 mmplate thickness: 3.00 mmthickness at Niro-steel: 1.50 mmno. of strokes: 34 Hub/mincutting angle: 1.6 Gradtable height: 820 mmdistance between columns: 3120 mmControl: POS 100 engine output: 2x 4.0 kWweight of the machine ca.: 3600 kgrange L-W-H: 4329 x 2350 x 1600 mm Current list price, including accessories: approx. 65,000 euros () Special price available upon requestThe PDC motorized guillotine shear is the reinforced version of the MHSU.It offers greater performance thanks to a more robust design and a DUO-CUT drive on both sides.Features:- Robust, motorized oscillating-cut guillotine shear- NC-controlled electric motor-driven backgauge with SCHRáDER POS 100 NC control system digital position display for the backgauge adjustable from the front right with setpoint/actual value input stepless adjustment over the entire travel range Limit values secured with limi ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 10900 €: 209.28 €: 1250 kg: 1300 mm: 450 - 550 mm: 400 mm: 80 mmmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlwith pneumatic downholerAlternatives (prices on request):Version without pneumatic pressure armVersion with brake, without motor, with or withaout pneumatic pressure armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mmplate thickness: 5.5 mmpre-bending: 5.0 mmroll diam. toproll: 140 mmmin. dia.: 210 mmturning speeds: 5.7 U/minengine output: 2.2 kWweight: 1365 kgrange L-W-H: 2020 x 900 x 1.200 mmFurnishing:- Robust electro-mechanical bending machine- 2x central rollers driven by an electric motor (top and bottom roller)- Top roller can be swiveled out manually, with folding bearing- including conical bending device- freely movable control panel- Lower roller manually adjustable, by hand wheel- asymmetrical roller arrangement- self-braking main motor- Safety device (safety line with switch unit)- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized side roller adjustment- Digital position display for motor-driven adjustable side rollerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 10 mmcutting angle: 2 °down holder: 14 Stückno. of strokes: 13 Hub/minthroat: 350 mmoil volume: 260 ltotal power requirement: 22 kWweight of the machine ca.: 10.550 kgdimensions of the machine ca.: 4000x2250x2050 mmDomestic equipments:- Hydraulic swing cut sheet metal shears- Touch screen controller with digital display for backgauge- automatic kerf adjustment via the control- Backgauge control 1000 mm travel with recirculating ball screws- Vibration cutting machine with kerf adjustment- 2 support arms- 1 side stop- Photocell behind the machine- Cutting length limit- cut line lighting- Chrome steel knife- Ball rolls in the table- hinged finger guard with limit switch- Footswitch- CE mark / Declaration of Conformity- Bed instructions in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 10.0 - 60.0 mm Stahlwall strength: 3.0 mm Stahltube diameter: 64.0 mm CU/Aluwall strength: 4.0 mmrevolutions per minute: 1.25 - 2.50 U/minbar material - diameter: 35.0 mmvoltage: 400 VoltControl: ISITAN NC total power requirement: 2.0 kWweight: 140 kgrange L-W-H: 380 x 900 x 600 mm Exhibition machine - like new never been used () Special price upon request- Steel tube capacity: 60.0 x 3.0 mm- Gas tube capacity: 2 Gas x 3.91 mm- Square profile capacity (FE 42) 60 x 30 x 4.0 mm- Max. bending radius: 200 mm- Minimum radius: 2 x D- Hexagonal tool holder- Min. outer diameter: 5 mm - 1/8 GasEquipment:- ISITAN NC digital control unit Control panel = touchscreen 20 sets with 200 programs each- Patented quick tool change system- Continuously adjustable bending speed- One bending speed- 1 free-floating foot switch- 1 bending tool set included Additional segments available upon reque ...

plate thickness: 4,0 mm STplate thickness: 3,0 mm VAtable-size: 800 x 800 mmblade length: 250 x 250 mmstrokes per minute: ca. 55 minengine output: 4 kWweight of the machine ca.: 800 kgdimensions of the machine ca.: 1300 x 1300 x 1300 mmFeatures:- Electro-hydraulic notching machine- 2x locking precision stops, with stop bars- Single/continuous stroke selectable- Front finger guard- Freely movable foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: R10-R260 bending speed: 2,5 U/min: 42x3 mm: 42x2,5 mm: 30 mm: 54x2 mmtotal power requirement: 1,5 kWweight of the machine ca.: 80 kgdimensions of the machine ca.: 410x1000x570 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 42.0 x 3.0 STAHL mmtube diameter: 30.0 x 2.0 EDELST mmbending angle max.: 180 °bending radius max.: 100 mmbending speed: 2.0 U/min.Control: NC voltage: 400 Vtotal power requirement: 0.55 kWweight of the machine ca.: 115 kg Current new price approx. 4.200 Euro Very good condition / with machine baseDescription:- NC electro-motor tube bending machine - mandrelless up to 50 programs can be stored- Automatically returns to the starting position- Maximum bending capacity for 42 x 3.0 mm steel tubes- Excellent bending quality with very tight bending radii (from 2x tube diameter). and bending angles between 0° and 180°- Easy operation- High accuracy and reliability- Quick tool change (within seconds)- Easy to transport- Includes machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 14020 €: 269.18 €: 76 mm: 370 mm: 680 mm: 910 mm: 193 kg: 15 cm³: 76 x 3 mm: 2 x 5,4 mm: 76 x 3 mm: 70 x 4 mm: 76 x 1,6 mm: 76 x 4 mm: 76 x 6 mm: 76 x 6 mm: 76,3 x 3,25 mm: 50 x 4 mm: 45 mm: 75 x 15 stehend, 75 x 30 mm: 380 mm: 10 mm: 10 mm: 1/2 U/min: 3.5 kWdigital display of bendmaterial spring back compensationquick-change tooling system2 hexagonal tool holders (40 and 50 mmaccurate counterbending die positioningfoot pedalusers manualtools not includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 13 mmthickness at Niro-steel: 8 mmcontrol: CYBELEC CybTouch down holder: 14 Stückcutting angle: 2,0° °total power requirement: 22 kWvoltage: 380 Vno. of strokes: 11 Hub/minweight of the machine ca.: 12.100 kgdimensions of the machine ca.: 4000x2240x2235 mmAccessories / equipment:- CYBELEC-CybTouch control panel with digital display for backgauge- hydr. Cutting gap adjustment via control- 1 side stop- 4 front lifting arms- cut line lighting- Cutting gap adjustment- Cutting length limit- Ball rolls in the table- motorized back gauge 1.000 mm travel with recirculating ball screws,   automatically start at the end of the stop- Shear knives for stainless steel cuts as standard- Photocell behind the machine- SIEMENS electrical system- BOSCH / HOERBIGER hydraulic system- Footswitch- Operating instructions in GermanThe data for this ad was created with M ...

sheet width: 2050 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 2100 mmdown holder: 12 Stückno. of strokes: max. 26 Hub/mincutting angle: 1.6 °back stop - adjustable: 750 mmControl: ELGO oil volume: 120 ltr.total power requirement: 11.0 kWweight: 3900 kgrange L-W-H: 2860 x 2100 x 1560 mm with only approx. 400 operating hours () Original price approx. 30.000 euros Special price upon request Features:- Robust electro-hydraulic oscillating shear- ELGO digital display, Model P9521, for electric backgauge- NC-controlled electric motor-driven material/backgauge Travel range continuously adjustable backgauge X = 750 mm Backgauge with backlash-free ball screw Travel speed: 100 mm/sec- 1x sturdy side stop with T-slot and millimeter scale- 1x sturdy support arm - Electric cut length limiter Cut length limiter to increase the number of strokes per minute- Man ...

sheet width: 1050 mmplate thickness: 1,8 mmpre-bending: 1,5 upper roll diameter: 70 mmmin. dia.: 105 mmtotal power requirement: 1,1 kWweight of the machine ca.: 320 kgdimensions of the machine ca.: 1700x700x1100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 57000 €: 1077.3 €: 2550 mm: 13 mm: 13 mm: 10 mm: 10 mm: 8 mm: 260 mm: 260 mm: 200 mm: 1,5 / 6 m/min: 7.5 kW: 4800 mm: 1600 mm: 1550 mm: 6800 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are rec ...