trabalho de chapa metálica usadas para venda (3,366)

chamfer lenght: 1530 mmplate thickness: mmdistance between columns: 1530 mmpressure: 40 tstroke length max.: 300 mmtravel -x axis: 500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 3020 mmplate thickness: mmdistance between columns: 2555 mmpressure: 220 tstroke length max.: 350 mmtravel -x axis: 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3050 mm: 06,5 mm: -: 0,5-2,5 °: 1000 mmwork height max.: 770 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Smallest bending diameter 640 mm- Pressing force against upper roll 5800 kN- Conical bending attachment- Central lubrication- Equipped for change rolls 570 / 500 / 430 mm

sheet width: 2540 mmplate thickness: 2,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 1,60 tdimensions of the machine ca.: mManual back gauge up to 550 mmSide gauge and table extensionsSharpened bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 2,50 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 2,00 tdimensions of the machine ca.: mMotorized backgauge with flip-up stops, up to 1500 mmMultiple program sequences with varying bending angles and stroke heights possibleMultibend 2000 control systemGround bending beamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 1650 mmmaterial thickness: 3,00 mmno. of straightening rolls: 21 Control: sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 50 mmbetween stands ca.: 1720 mmrun-in height: 1250 mmtotal power requirement: 45 kWweight of the machine ca.: 24,50 tdimensions of the machine ca.: m6-HIGH LEVELER / Strip Leveler / with Quick-Change System- 18 Back-up Supports- Digital Roll Adjustment (0.01 mm resolution)- Gearbox renewed in 2021- Quick-Change SystemThe quick-change system is mounted on a sliding plate. This sliding plate—on which the leveling rolls as well as the entire back-up support assembly are mounted—can be extended, allowing for quick and easy roll replacement in an easily accessible position.The extension and retraction of the sliding plate are hydraulically actuated. Connection to the drive mechanism is automatic.- Intermediate RollsThe intermediate rolls preve ...

round bar steel: 32 mmsquare edge steel: 60 x 6 mmL-beam: mmpressure: 50 tstroke: 10 - 28 mmtotal power requirement: 4 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 0,65 x 1, 2 x 1, 67 mMaximum pressing force 50 tFLAT STEEL SHEAR PERFORMANCEFlat steel: 150 x 15 mm or: 180 x 18 mmPERFORMANCE OF PROFILE STEEL SHEARS Steel 90°: 80 x 8 mm 45°: 50 x 6 mmAngle steel 90°: 100 x 10 mm 45°: 50 x 6 mmPERFORMANCE OF BAR STEEL SHEARS Round steel: 32 mmSquare steel: 30 x 30 mmPERFORMANCE SQUARE NOTCHER: 60 x 6 mmSheet metal up to: 10 mmNotch width: 42 mm:Notch depth: 55 mmPERFORMANCE HOLE PUNCHPunching force: 50 tStroke: 10 - 28 mm Punches:27 in 14 mmProjection: 155 mmGENERAL DATADrive power: 4.0 kWOil capacity: 40 lDimensions L x W x H: 650 x 1200 x 1670 mmWeight approx.: 840 kg Translated with DeepL.com (free version)The data for this ad was created with ModulMWS - the softwar ...

plate thickness: 4 mmplate length: 200 mmtotal power requirement: 3 kWweight of the machine ca.: 550 kgdimensions of the machine ca.: 1,0 x 0,8 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mmplate thickness: 4,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 2,80 tdimensions of the machine ca.: mPowered BackgaugeSide Stop and Table ExtensionsCut Length LimitationCutting Line IlluminationLight Barrier for Rear Area GuardingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 0300 mmmaterial thickness: 2,50 mmno. of straightening rolls: 11 feed rolls: 2 exit pinch rolls: 2 diam. of the rolls ca.: 60 mmstraightening speed: 5 - 30 mm/minsheet thickness - min.: 0,40 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFeatures:• All upper rollers manually adjustable• All lower rollers interconnected via gears• Speed manually adjustable via handwheel• Strip guide at the infeed• Roller basket at the outfeed• Sensor arm for loop controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2520 mmplate thickness: 3.2 mm STcutting thickness max.: 5.0 mm ALcutting thickness max.: 1.5 mm VAno. of strokes: 34 Hub/mincutting angle: 1° 20 Gradback stop - adjustable: max. 1.000 mmwork height max.: 800 mmtotal power requirement: 7.5 kWweight of the machine ca.: 2100 kg New price approx. 21,000 euros Special price on request Machine was rarely used - good condition ()Furnishing:- robust / motorized swing-cut guillotine shears- Shatterproof, torsion-free steel welded construction- compact and clear mechanical design- ESTUN NC digital display - type E10-S- electro-motorized back gauge, adjustment via electric. Button- 1x hold-down bar- manual cutting gap adjustment- rear protective device (side protective grilles)- Selector switch for single and continuous stroke- 1x front side stop- 2x front support arms- 1x freely movable foot switch- original instruction manualThe da ...

pressure: 50 tchamfer lenght: 1500 mmdistance between columns: 1220 mmControl: Cybelec DNC 1200 closing speed: 95 mm/minworking feed: 1-10 mm/secwork stroke: 156 mmoverrun time: 59 mstracking travel: 6 mmthroat: 200 mmdistance table - lower edge of ram: 301 mmtable width: 160 mmtable height: 850 mmx-axis: 550 mmtravel R-axis: +/- 50 Number of axles: 3 (Y, X, R) St.weight: ca. 3600 kgdimensions: mma lot of lower and upper toolsincl. work lightnew control in 2003: Cybelec DNC 1200The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0280 mmcoil weight: 1,00 tcoil internal dia.: 290 - 570 mmcoil outside - diam. ca.: 1000 mm0: 42 U/mintotal power requirement: 1,10 kWweight of the machine ca.: tdimensions of the machine ca.: 1,30 x 1,00 x 1,45 mControl unit missingprovisionally connectedmechanical brakeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working hours laser on: 50921 h Working hours beam on: 21717 h Laser power: 3200 Watt Working range laser: 4000 x 2000 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Max. aluminium: 8 mm Length: 11600 mm Width: 5300 mm Height: 2200 mm Machine weight: 16000 kg Electrical connected load: 73 kVA

Working hours machine: 23304 h Working hours laser on: 22804 h Working hours beam on: 10185 h Laser power: 4400 Watt Working range laser: 3000 x 1500 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 12800 mm Width: 6300 mm Height: 2400 mm Machine weight: 15000 kg Electrical connected load: 51 kVA

Decoiler Coil weight: 2 x 2 ton Material width: 380 - 500 mm Coil exterior diameter: 1.300 - 1.400 mm Expansion range: 445 -530 mm Leveller / Straightener Material width : 40 - 500 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pinch rolls: 2 pcs. Diameter of the drawing rolls: 60 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 1,6 mm Cross section: 800 sq mm Feeding speed: 0 - 30 m / min Required power: 3 kW

Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

plate thickness: 3 mmangle adjustable from - to: 30 - 120 Gradtable height: 900 mmweight: ca. 800 kgCutting capacity: 3 mm St40 at 150 x 150 mm, 2 mm stainless steel, cutting angle continuously adjustable from 30° to 120°, pneumatic clamping for angle adjustment (Boschert system), machine is in good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: max. 3 mmdistance betw. rolls: 125 mmthroat: max. 500 mmweight: ca. 500 kgMaterial thickness at 40 kg/mm² tensile strength: max. 3 mmWorking width: 500 mmWorking depth: 450 mmManual adjustment of the upper rollerRoller center distance: 125 mmContinuously variable working speed: 3–15 m/minStop skirt1 set of rollersForward/reverse operation via foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

contact roller: 70 x 50 abrasive belt size: 2000 x 12/50 power capacity: 2,2 kWOverall size: ca. 400 x 1100 x 1250 mmdeburring machine / free belt frinding machineabrasive belt with widt from 12-50 mm with vertical working positionhead inclination up to 45° both wayseasy bending of the belt allows to follow the shapecutting speed 24m / secbig tabel surface with ball rollingwith self filtering dust extractor system, filtering bag in retardant polyester material for retaining finest dust. Impeller with open blades to prevent clogging. air consumption 700 m³/hcomes with a huge bunch of belts!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending speed: 2.1 m/minBending capacity - square: 30x30 mmbending capacity - flat iron: 80x15 mmBending capacity - flat iron on edge: 50x10 mmtube diameter: 1 oder 60x2 mmShaft diameter - upper: 35 mmShaft diameter - lower: 30 mmtotal power requirement: 0,75 kwrange L-W-H: 650 x 500 x 1300 mmweight: 170 kgStandard features:- hardened special steel shafts- a set of hardened rollers- Bottom rollers are driven- lateral straightening rollers- Foot pedal- horizontal and vertical workingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 4412956673057 : 95 to. ca. engine output: 7,5 kWweight of the machine ca.: ca 5 tdimensions of the machine ca.: 2,2 × 1,0 × 2,3 m Technical specifications (from the label)Angle steel (L-profile):150 × 15 mm at 90°100 × 14 mm at 45°Flat steel:up to approx. 150 × 16 mmlarger cross-sections up to 340 × 16 mm (depending on function)Beam profiles:U-profiles (UPN): 220I-sections (IPN)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mmplate thickness: 4,0 mmdistance between columns: 2100 mmroll diameter: 150 mmtotal power requirement: 7,0 KWweight of the machine ca.: 2,2 tdimensions of the machine ca.: 2,95 x 1,0 x 1,75 mmSheet metal bending machine with 3 rollers- 2 driven rollers- Rear roller electrically adjustable- Conical bending- Foot switch- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2.5 mm: 45.0 mmbending angle max.: 0 - 135 °weight of the machine ca.: 285 kgrange L-W-H: 1175 x 850 x 1175 mmDescription:Swivel bending machine with patented hydraulic auxiliary cylinder andRemote control. The machine is both manual (for thinner sheets) andmotorized (for thick sheets) operated. The motorized function is overa remote control operated with an emergency stop.Version S - with segmented upper beam for boxes and special profiles- Max. Bending angle 135 °- Max. Opening upper beam 45 mm- The HS Ergo is a further developed machine that uses a patient hydraulic auxiliary cylinder is supported- The machine is both manual (for thinner sheets) and motorized (for thick sheets) operated.- the motorized function is operated via a remote control with emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech ...

plate thickness: 4,0 mmroll diameter: ca. 120 mmthroat: 450 mmtotal power requirement: kWweight of the machine ca.: 0,48 tdimensions of the machine ca.: 1,3 x 0,8 x 1,8 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.