tornos usadas para venda (3,164)

FANUC CNC Lathe Serial Number: S2-1342 Power: 13 kW CNC Control: FANUC 0i-TA Spindle speed: up to 4500 rpm (max. 6000 rpm) 12-position turret Turning diameter: 180 mm Z-axis travel: 300 mm 160 mm hydraulic plate Bar pitch: 52 mm Coolant capacity: 40 L Suitable for the production of small and medium-sized parts Untested operation This item is delivered loaded by truck. The costs of dismantling and loading are borne by the buyer. Auction-ID: A7-47344-12

Schaublin 102N precision lathe, center height 102 mm, turning diameter over bed 200 mm, center width approx. 450 mm. High-precision Swiss toolmaker lathe with W20/W25 spindle. Suitable for precision mechanics, tooling, prototyping and precision machining. Depending on the version, it can be mounted on a workbench or casting stand. Main technical data Tip height: 102 mm Turning diameter over bed: 200 mm Turning diameter over slide: 120 mm Center width: approx. 450–470 mm (depending on the version) Spindle bore: 20 mm (W20) or 25 mm (W25) Speed range: up to approx. 3,000 rpm, depending on the model also higher Auction-ID: A1-47143-29

NAKAMURA-TOME Super Mill SC-200LMY precision CNC lathe, equipped with C and Y axes as well as driven tools, allowing combined turning and milling operations. Machine suitable for the production of complex parts in series. Equipped with an LNS Quick Load Servo 2 automatic bar feeder for continuous feed. C-axis (0.001° resolution) Y-axis (± 41 mm) Driven Tools (12 positions) Tool speed: up to 6,000 rpm Tool power: 7.5 / 3.7 kW CNC : FANUC 21i-TB Machine tested under tension Auction-ID: A1-47143-1

Main technical data Tip height: 102 mm Turning diameter over bed: 200 mm Turning diameter over slide: 120 mm Center width: approx. 450–470 mm (depending on the version) Spindle bore: 20 mm (W20) or 25 mm (W25) Speed range: up to approx. 3,000 rpm, depending on the model also higher Including workbench and drawer cabinet with various accessories Auction-ID: A1-47143-30

Capacity: Swing over bed: 720mm Swing over saddle: 590mm Max. turning diameter: 481mm Max. turning length: 755mm Bar working diameter: 102mm Spindle: Chuck: Sam Chully MH-212 (305mm) Spindle speed: 2800rpm (belt type) Spindle nose: ASA A2#11 Spindle bearing diameter: 160mm Spindle through hole diameter: 115mm Turret: No. of tool stations: 12 OD tool size: 25mm Boring bar diameter: 50mm Indexing time: 0.15 sec Carriage: X-axis: 260mm Z-axis: 830mm Rapid traverse X-axis: 25m/min Rapid traverse Z-axis: 30m/min Tailstock: Quill diameter: 100mm Quill bore taper: MT#5 Quill travel: 100mm Machine is equipped with: - 2800rpm 35/22kW 1600Nm - Sam Chully MH-212 (305mm) - Live center MT-5 - Part catcher - Axis-Tool Number display - Bar feeder interface - Doosan Tool Load Monitoring - Manuals - Programmable tailstock - Tool setter - 128 Pairs of tool offsets - Part program storage 1 ...

Machine is equipped with: - chip conveyor - part catcher - part conveyor - Powergrip H-08 chuck Auction-ID: A1-47218-13

Chuck diameter: 360mm Tooling in turret not included! Auction-ID: A1-47218-11

turning diameter: 42 / 140 mmturning length: 170 mmcontrol: Mitsubishi Meldas turning speeds: 80-8.000 U/minc-axis: 0,001° turret (x-stations): 2x 12 (VDI 20) angetriebenturning speeds: 45-4.500 U/minspindle: 1 kWgripping station: 42 mmturning speeds: 60-6.000 U/minc-axis: 0,001° number of controlled axis: 8 collet unit: 48 DIN 6343 .Number of working hours: 10769 hchip conveyor: ja/yes Bj. 2018total power requirement: 7,5 / 11 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2,4 x 1,6 x 2,2 mCNC turning and milling machine CITIZEN BOLEY BE 42, year 2007Simultaneous working with 7 axes on main and pick-up spindlevery good condition, operating hours 21.999h (September 2024)Accessories:# Various tool holders (see picture)5x axiale driven tool holder# collet chuck for collets type 173E# additional coolant cooler# Knoll chip conveyor, year of construction 2018The Boley BE 4 ...

Robot, tooling in turret and oilmist filter not included! Auction-ID: A1-47218-18

turning length: 450 mmturning diameter over bed: 245 mmturning diameter over slide rest: 135 mmspindle bore: 23.0 mmtool adaptor: DIN 55021-4 quill:: 2 MKquill travel: 80.0 mmturning speeds: 60 - 3000 U/minbed width: 155 mmtotal power requirement: 1.2 / 1.5 kWvoltage: 380 Vweight of the machine ca.: 340 kg.range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned partsThe Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces.The machine is built for extremely tight tolerances.The hardened and ground machine bed ensures maximumfor maximum vibration damping and durability.Features:- Robust lead/traction spindle lathe- 2-axis digital readout D60-2V- three-jaw chuck- ...

turning length: 450 mmturning diameter over bed: 245 mmturning diameter over slide rest: 135 mmspindle bore: 23.0 mmtool adaptor: DIN 55021-4 quill:: 2 MKquill travel: 80.0 mmturning speeds: 60 - 3000 U/minbed width: 155 mmtotal power requirement: 1.2 / 1.5 kWvoltage: 380 Vweight of the machine ca.: 340 kg.range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned partsThe Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces.The machine is built for extremely tight tolerances.The hardened and ground machine bed ensures maximumfor maximum vibration damping and durability.Features:- Robust lead/traction spindle lathe- 2-axis digital readout D60-2V- three-jaw chuck ...

Brand IDIMA S.A. Model SN 500 SAConventional parallel latheEquipped with 3-jaw self-centering plateIncludes tailstock includesdigital dimension display (DRO) Quick change tool holder installedIntegrated lubrication and coolingLong prismatic bedUsed condition with visible wear and dirtMachining chips presentYear of manufacture not identified in the imagesTechnical inspection is recommended prior to commissioning Auction-ID: A7-47333-45

Auction-ID: A1-47218-12

Chuck size: 500mm X-axis: 385mm Z-axis: 2070mm Distance in between centers: 2030mm Machine is equipped with: - steady rest - tooling in turret not included Auction-ID: A1-47218-10

Auction-ID: A1-47218-6

turning diameter: 450 mmturning length: 380 mmcontrol: Seicos 40L Multi max. machining diameter: 340 mmBar feed: 51 mmturning speed range - spindle: 30 ~ 5.000 U/mindrive capacity - spindle motor: 11 / 7,5 kWspindle nose: A2-6 spindle bore: 59 mmbearing diameter: 100 mmtravel -x axis: 215 mmtravel -z axis: 400 mmturret (x-stations): 16 feed: 0,001 ~ 500 mm/minrapid traverse: X/Z: 30 m/minShank diameter: 25 x 25 mmDrill shank diameter: 40 mmtail stock: taper of center: MK 5 tailstock adjustment: 300 mmtotal power requirement: 23 kVAweight of the machine ca.: 4,6 tdimensions of the machine ca.: 5,5 x 2,8 x 2,2 mDocuments: Chip conveyor: Tailstock: Signal-Light: Parts removal: tool setter: work light: tool holders: (Revolver / Turret) CNC LatheHITACHI SEIKI - HiTec-Turn HT 20 RIIIThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tooling in turret not included! Auction-ID: A1-47218-9

Robot, tooling in turret and oilmist filter not included! Auction-ID: A1-47218-17

Specifications: Control: Haan NGC Hours: 1230 Travel: X-axis: 239mm Z-axis: 826mm Feedrates: Rapid X/Z: 24m/min Spindle: Spindle speed: 3200rpm Spindle motor power: 29,8kW Spindle motor torque: 576Nm Spindle nose: A2-8 Chuck size: 305mm Tool changer: Positions on turret: 12 Taper: VDI-40 Distance between centers: 826mm Machine is equipped with: - Chip conveyor - Tailstock - Tool setter - Macro’s - Rigid tapping - VPS editing - Media display - Max memory 1GB - Wireless networking - Compensation tabels - tooling as showed in pictures Auction-ID: A1-47218-2

Auction-ID: A1-47218-14

Machine is equipped with: - chip conveyor - part catcher - part conveyor - bar feeder Auction-ID: A1-47218-8

CMZ model TL20 M CNC lathe for machining metal parts. Equipped with automatic tool tower, tailstock and CNC control. Suitable for precision turning, facing, drilling and machining operations in industrial environments. Faired machine with integrated cooling system. Auction-ID: A7-47328-34

FAT CNC Tower – TUR MN 560 x 2000 (Revised) Description: FAT TUR MN 560 x 2000 CNC tower, overhauled and recently repainted, ready for immediate production. Robust and high-precision machine, equipped with a Siemens Sinumerik numerical control guaranteeing reliable performance for the machining of large parts. Equipment included: 3-jaw chuck, fixed bezel, tool set, documentation and backup of operating procedures. Work carried out: Overhaul (mechanical, hydraulic and electrical), complete repainting. Auction-ID: A1-47080-2

Description: Conventional FAT TUR 560 x 2000 tower, fully functional and currently undergoing aesthetic refurbishment (repainting and exterior finishing). Robust, ready-to-use machine, ideal for general turning operations in the workshop. Condition: In working order, with exterior refreshed after completion of the refurbishment work. Sale: Sold as is. Auction-ID: A1-47080-5

Machine number: 219278Operating voltage: 380 VSpindle passage: approx. 22 mmSpindle speed: 270-3000 rpmCentre length: approx. 350 mmCentre height above bed: 110 mmTurning diameter over bed: 220 mmCentre height over support: 70 mmTurning diameter over support: approx. 140 mmThe machine is equipped with a tailstock, a Multifix turning steel holder and a quick-release chuckincluding post collets and other suitable accessoriesReference: Ulmer - Lot 16 Auction-ID: A7-46763-354

Machine number: 31601Operating voltage: 380 VRated current: 6 A, spindle speed: 16 – 1680 rpmCenter length: 550 mmCenter height above bed: 140 mmTurning diameter over bed: 280 mmCenter height over support: 90 mmTurning diameter over support: 180 mmSpindle passage: approx. 38 mmEquipped with tailstock, Multifix turning steel holderincl. digital display from HEIDENHAINReference: Oberthür Auction-ID: A7-46763-346

Operating voltage: 380 VControl voltage: 220 VConnection: 3 kWRated current: 6.25 AFrequency: 50 HzSpindle speed: 12 – 2800 rpmCentre length: 750 mmCentre height above bed: 170 mmTurning diameter over bed: 340 mmCentre height over support: 100 mmTurning diameter over support: approx. 200 mmSpindle passage: approx. 38 mmEquipped with: – Tailstock – Multifix turning steel holder – Three-jaw chuck RÖHM (Ø 160 mm)Reference: Mahle Auction-ID: A7-46763-348

Operating voltage: 380 VFrequency: 50 HzRated current: 12 AConnection: 4.8 kWSpindle speed: 25 – 2000 rpmCenter length: 700 mmCenter height above bed: 170 mmTurning diameter over bed: 340 mmCenter height over support: 130 mmTurning diameter over support: approx. 260 mmSpindle passage: 48 mmEquipment: tailstock, Multifix lathe steel holder, quick-release chuckIncl. collets and various accessoriesReference: Weitner Auction-ID: A7-46763-352

Operating voltage: 380 VFrequency: 50 HzRated current: 11 ASpindle speed: 70 - 3500 rpmCenter height: 145 mmCenter width: 750 mmTurning diameter over bed: 280 mmTurning diameter over face cuts: 178 mmSpindle bore: 35 mmSpindle nose: D 1-3Morse taper in head sleeve: 3Lead screw diameter: 25 mmThread: 6 mmPitch Reference: Showroom Neuburger Auction-ID: A7-46763-351

Machine number: 10279Operating voltage: 380 VConnected load: 3 kWRated current: 25 AFrequency: 50 HzSpindle speed: 40 - 2800 rpmCentre length: 750 mmCentre height above bed: 150 mmTurning diameter over bed: approx. 300 mmCentre height over support: 100 mmTurning diameter over support: 200 mmSpindle passage: approx. 35 mmEquipment: Tailstock Multifix Type B steel holder, three-jaw chuck (diameter: 160 mm), 2-axis digital display from the manufacturer RSFReference: Mahle Auction-ID: A7-46763-349