tornos usadas para venda (3,107)

Cazeneuve HBX 360 precision conventional centre lathe with chuck, toolpost and tailstock. Well-known toolroom lathe; used condition with visible wear. Full specifications to be confirmed. Auction-ID: A1-49190-43

COLCHESTER TRIUMPH 2000 Metal Lathe with HEIDENHAIN Digital Readout. Complete as can be seen in the photos. With automatic power supply and readout on the X and Y axis, also threading; Voltage: 380 volts; Power: 7.5kw; Distance between centers: 800 mm; Max. Turning Diameter: 390mm; Diameter: 55 mm; Rows: 25 - 2000 (16 steps); Tailstock: MK-4; 3-jaw: 250 mm; Motor brake: yes Auction-ID: A1-48979-8

MAZAK CT-4500M CNC Turning Center, a high-quality industrial machine designed for precision turning. This Mazak model is particularly appreciated in CNC workshops for its robustness and its ability to produce complex parts in a single cycle. Equipped with a tailstock and a multi-tooling system, this lathe is ideally suited for: machining of long or complex parts Industrial production Mechanical subcontracting Precision mechanics Mass or small series production The MAZAK brand is a global benchmark in CNC machine tools, offering reliability, precision and longevity. Auction-ID: A1-48554-3

Auction-ID: A1-49018-176

Heidenreich & Harbeck VDF Hamburg conventional centre lathe with chuck, toolpost, tailstock, long bed, lead screw/feed shaft and work light. Heavy-duty machine for shafts and general turning work. Auction-ID: A1-49190-61

MAZAK INTEGREX i-200 S CNC Multitasking Center equipped with a 72-position high-capacity tool magazine, allowing complete machining of complex parts in a single take. This machine combines turning, milling and multi-axis machining, offering high productivity and flexibility for technical parts. The 72-tool magazine is a huge advantage: Reduced tool changes Automated production of complex parts Time savings in series possibility of programming long cycles without operator intervention Ideal machine for: Advanced CNC Workshops Industrial production Mechanical subcontracting Aeronautics, Medical, Energy Machining of complex parts Mazak's INTEGREX range is a global benchmark in multitasking centers, highly sought after in the used market. Auction-ID: A1-48554-4

PRONUM 630T control,turning length - 1500mm Auction-ID: A7-49398-7

VEB Heavy-Duty Industrial Lathe Type: Heavy-duty industrial lathe Manufacturer: VEB Großdrehmaschinenbau \"8. Mai\" (Germany) Year of manufacture: 1993 Distance between centers: 4000 mm Swing over bed: approx. 800 mm Swing over carriage: approx. 500 mm Spindle bore: approx. 80 mm Power supply: 3-phase, 380 V, 60 Hz Control voltage: 220 V Installed power: 13.5 kW Rated current: 28 A Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49190-23

Cegonheira conventional centre lathe with chuck, toolpost, tailstock and screwcutting gearbox. Used industrial lathe; centre distance, spindle bore and operation to be confirmed. Auction-ID: A1-49190-17

SAICC B26 special purpose/threading machine, made in Pavia, Italy. Older workshop machine with guards, spindle and manual controls. Exact application and operating condition to be confirmed. Auction-ID: A1-49190-44

Turning diameter max. 390 mm Turning length max. 572 mm Control MSD 501 Circumferential diameter over bed 700 mm Circumferential diameter over face slide 560 mm Distance between tips 725 mm Standard turning diameter 248 mm max. turning diameter 1: 390 / 2: 260 mm Main spindle: Speed range - main spindle 35 - 3,500 min/-1 Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A2-8 Spindle bearing diameter 130 mm Spindle bore 86 mm Usable rod diameter 62 mm Travels: x-axis 1: 238 / 2: 173 mm z-axis 1: 650 / 2: 650 mm Tool turret: Number of turrets 2 Number of tool positions 10 + 8 pos. Number of driven tool stations - pos. Switching time 0.3 sec Shaft diameter 25 mm Shank diameter of the drills max. 50 mm Tailstock: Tailstock travel 500 mm Quill diameter 110 mm Tailstock mount MK 5 Quill stroke 150 mm Feeds: Rapid traverse X1/2: 18 m/min Rapid traverse Z1/2: 24 m/min Feed  ...

Small automatic/cam lathe with enclosed working area, bar/feed area and motorized unit. Used machine with visible wear; suitable for repair, parts or workshop use. Manufacturer/model and full specs to be confirmed. Auction-ID: A1-49190-39

Equipped with: 41 Tools for lathe and milling machine. SIZE SK50 Auction-ID: A1-47359-106

Machine Type: Conventional Engine Lathe Manufacturer: Boehringer Göppingen Brand / Series VDF Made in Germany Auction-ID: A1-49190-5

BLIN BL-CAK6140 CNC Lathe Type: CNC lathe Manufacturer: Ningbo Blin Machinery Co., Ltd. Model: BL-CAK6140 / CAK6140B Year of manufacture: 2020 Control: GSK CNC 980TDb Machine configuration: Flat bed CNC lathe with tailstock Swing over bed: approx. 400 mm Distance between centres: approx. 1000 mm Spindle speed range: 100–2000 rpm Main motor power: 7.5 kW Total power: 10 kVA Voltage: 380 V Phase: 3 phase Frequency: 50 Hz Total current: 40 A, to be confirmed Chuck type: 3-jaw chuck Tailstock: Included Tool post: 4-position turret / tool holder, to be confirmed X-axis ball screw pitch: 5 mm Z-axis ball screw pitch: 8 mm Rapid traverse X-axis: 3 m/min Rapid traverse Z-axis: 4 m/min Positioning accuracy X-axis: 0.02 mm Positioning accuracy Z-axis: 0.022 mm Repositioning accuracy X-axis: 0.01 mm Repositioning accuracy Z-axis: 0.011 mm Minimum input unit X-axis: 0.001 mm on diameter Minimum i ...

turning diameter - 12 mm,turning length - 135 mm,approximate dimensions - 1500 mm x 770 mm x 1540 mm,machine equipped with bar feeder,machine dimensions - 2400x1200x2400,bar feeder dimensions - 4800x500x1500, Auction-ID: A7-49398-5

new controler from 2021,turning length - 1100mm,turning diameter over the bed - 400mmturning diameter over slide - 225mm,lift of the claws over the bed guide - 260mm,bed width - 320mm,support length - 520mmOffer not include other machines and parts which are visible on the photos but not belong to the machine. Auction-ID: A7-49398-17

turning length - 1000 mm,turning diameter - 250 mm Auction-ID: A7-49398-35

Serial number: L2104250,Power supply - 400V/230V, 50Hz,Power 9,0 kW Auction-ID: A7-40851-4

Operating voltage: 380 VFrequency: 50 HzControl voltage: 220 VRated current: 20 ATip length: 1000 mmCenter height above bed: 250 mmTurning diameter over bed: 500 mmCenter height over support: 150 mmTurning diameter over support: approx. 300 mmSpindle passage: approx. 58 mmThe machine is equipped with a tailstock, a Multifix turning steel holder and a three-jaw chuck FORKARDT, diameter: 200 mmalso a two-axis digital display from the manufacturer HEIDENHAINSpeed: up to 2500 rpm Auction-ID: A7-49089-410

Technical data Manufacturer: Colchester Model: MASCOT (Electronic Mascot) Machine Type: CNC Lathe Control: GE Fanuc Series 20-T Spindle speed: approx. 20 – 1600 rpm Spindle bore: approx. 74 – 76 mm Turning diameter over bed: approx. 430 mm Turning diameter over slide: approx. 260 – 270 mm Center width: approx. 1200 – 2500 mm Spindle motor power: up to approx. 11 kW Weight: approx. 2.2 – 3.0 t Configuration CNC control Fanuc 20-T Tool holder / turret (typical) Tailstock available Coolant Setup Closed machine enclosure Note The technical data was researched on the basis of publicly available information on the Colchester Mascot series. Original machine documentation was not available. Deviations are possible. Auction-ID: A7-49302-3001

turning diameter: 310 mmturning length: 450 mmcontrol: Fanuc O-TC total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Fanuc O-TC12-fold revolver (VDI30)3-jaw chuck main spindle3-jaw chuck sub spindlechip conveyortool measuring devicecoolant deviceTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 500 mmUmlaufdurchmesser über Planschlitten / rotary diameter over sledge 310 mmmax. Drehdurchmesser / max. turning diameter 310 mmmax. Drehlänge / max. turning lenght 450 mmX-Weg / X-travel 200 mmZ-Weg / Z-travel 450 mmDrehzahl / spindle speed 4500 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesStangendurchlass Hauptspindel / bar diameter main spindle 50 mmEilgang X / rapid feed X 24 m/minEilgang Z / rapid feed Z 30 m/min.Antriebsle ...

Operating voltage: 230 VFrequency: 50-60 HzRated current: 11 AControl: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840)Turning length: approx. 300 mmCenter height above bed: approx. 100 mmTravel X: approx. 100 mm, Z: approx. 200 mmThe machine is equipped with a tailstock, a three-jaw chuck and a special tool turretincluding a mobile workbench and matching accessories Note: An identical and completely identical machine will be delivered and not exactly the one that can be seen in the photos. The illustrations serve only as examples. It cannot be guaranteed that the accessories shown are included in the scope of delivery Auction-ID: A7-49056-36

Auction-ID: A1-49309-10

Equipped with: groups cabinet, Auction-ID: A1-47359-94

Mori Seiki NL 2500 Y/700 High Performance Lathe Turning diameter 275 mm Turning length 705 mm Control MAPPS II MSX 850 Circumferential diameter over bed 923.8 mm Circumferential diameter over face slide 755 mm max. turning diameter 356 mm max. rod diameter 80 mm Main spindle Speed range - main spindle 4,000 rpm Drive power - main spindle 26 / 22 kW Spindle nose JIS A2-8 Spindle bore 91 mm Spindle bearing diameter 140 mm C-axis 0.001 ° Travel x-axis 260 mm z-axis 795 mm y-axis 100 (+/- 50) mm Revolver Tool Positions 12 Pos. Shank height for square tool 25 mm Shaft diameter for drill rod max. 50 mm Turret switching time 0.25 sec. Speed range of the indicated Tools 6,000 min -1 Drive power - applied Tools 5.5 / 3.7 kW Feed Rapid traverse X-axis 30 m/min Rapid traverse Z-axis 30 m/min Rapid traverse Y-axis 10 m/min Tailstock Tailstock Shift 564 mm Quill diameter 80 mm Pick-up ...

- Maximum distance between points approx. 6000 mm. - Turning on bed approx. 740 mm. - Flip on carriage approx. 420 mm. - Bed width 510 mm. - Bar pitch diameter approx. 80 mm. - 18 rotation speeds from 16 rpm to 1250 rpm. - 3-jaw chainring, diameter 315 mm. - Fagor 20i-T 2-axis (X,Z) digital display. - Equipped with a bezel. - Operating conditions of this machine: unchecked. Auction-ID: A7-48839-14

TEACH-IN LATHE Inv. No. 13.051C1 Make CMT URSUS Model URSUS PLUS 250 Year 1996 Serial number 12628 Centre Distance 1.000 mm Max. Swing over Bed Ø 480 mm Max. Swing over Cross slide Ø 400 mm Spindle bore Ø 105 mm 2 ranges stepless 0 – 2.000 kW 8/11 Volt 380 Cycles 50 Including Toolholder Multifix 3-jaw chuck Ø 315 Auction-ID: A1-49027-47

turning diameter: 210 mmturning length: 580 mmcontrol: 840 D Siemenscentre height: 190 mmturning diameter over bed: 330 mmturning dia. over face-slide: 260 mmMain spindle:: turning speed range - main spindle: max. 4.000 min/-1power capacity - main spindel: 10 / 7,5 kWmax. Torque: 115 / 86 Nmspindle bore: 68,5 mmmax. usable bar diameter: 51 mmC - Axis: 0,001 °axis stroke:: travel -x axis: 185 mmtravel -z axis: 455 mmturret:: number of toolpositions: 12 pos.tool taper: VDI 30 Driven Tool Stations:: 6 pos.Tailstock:: tailstock adjustment: 400 mmintake pressure max.: 4.000 Nfeeds:: rapid traverse: X: 20 / Z: 30 m/minFeed force ( X / Y / Z ): 4,5 kNtotal power requirement: 21 kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: 8,0 x 2,2 x 2,0 mDocuments: Chip conveyor: Tailstock: Coolantsystem: C-axis: parts catcher: driven tool stations: Signal-Light: bar feeder: I ...

turning diameter: 400 mmturning length: - mmcontrol: DMG Mori SLIMline z-axis: ca. 750–755 mmx-axis: 276 mmy-axis: +/-60 mmgreates pass round over bed: 700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe machine is in very good condition and has recently been inspected and measured by a service technician.The lathe was primarily used to manufacture turned plastic parts. CNC lathe with driven tools, C-axis, Y-axis, andcounter-spindleCNC control:DMG Mori SLIMline multi-touch control (19/Operate 4.7 on Siemens)Screen language: German/EnglishMain spindle:A2-8 with AC motorDrive power 25.5/17 kW (40/100% duty cycle)Spindle speed 4000 rpmHollow clamping system, max. bar capacity 80 mmCounter-spindle:A2-6 designed as a built-in motor spindleISM 52 with hydraulic clamping deviceDrive power 14/13 kW (100/40% duty cycle)Spindle speed 5000 rpm12-sta ...