fresadoras usadas para venda (2,365)

Modelo: Trak DPM 750 Tipo: AEVF N° de Série: 513352 Controles: Proto Trak MX3, comutável para MX2 Curso: X, Y, Z 750 x 400 x 610 mm Tamanho da mesa: 1270 x 320 mm peso: 1900 kg Ano construção: 1995 País de origem: Taiwan

• Descrição: Fresadora com bancada de 3 eixos • Alimentação: 3x 400V • Dimensões: 1100 x 1600 x 1100 mm • Peso: 600 kg • Funcionamento desde: 21.05.2013 / P 1971 • Acessórios: fresadora e refrigeração nebulizadora e acessórios diversos

Tipo: Univer FC 100 Potência: 1,2 kW Fonte de alimentação: 380 Volt Consumo corrente: 3 A Peso ca: 125 kg Diretamente do cliente utilizado a partir de novembro da CH-Pratteln disponível.

A máquina encontra-se em bom estado técnico, os testes são possíveis mediante acordo prévio.

This Trimill VU 2313 Vertical Machining center was manufactured in the year 2010 in the Czech Republic and has 68648 hours, of which 40637 are spindle hours. It is equipped with a Heidenhain iTNC530 control unit and has 5 axis. The machine has a spindle speed of 10000 rpm, is in good condition, and is well maintained.

This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It features an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,040 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining centre we have for sale. Contact us for further details.

This 3-axis Mazak VCS 530C vertical machining center was manufactured in 2015. It features a robust Mazatrol MATRIX 2 control system, a table size of 1300x550 mm, and a maximum table load of 1200 kg. The spindle operates at speeds up to 12000 rpm with ISO 40 taper, and the machine includes a 30-position tool magazine and dual pallets. Consider the opportunity to buy this Mazak VCS 530C vertical machining center. Contact us for more information.

Inv. Num. : 8974 Tipo: OFA 16 SC Produtor: TOS Gerado: Parâmetros: Peso da máquina: 5 t

Key data: 450 mm, 600 mm, 330 mm

Nº de catálogo. : 8975 Tipo: C 22 U Produtor: Hermle Produzido em: 2018 Característica: Sistema de controlo: Heidenhain TNC 640 Horas totais: 23.000 h Número de posições de pilha: 192 Número de eixos: 5 peças Viagens do eixo X: 450 mm Viagens no eixo Y: 600 mm Viagens do eixo Z: 330 mm Velocidade do bloco: 18000 1/min Afunilamento: HSK-A63 Arrefecimento interno: 80 bar Mesa rotativa Ø 320 mm A ±135° / C 360° Sistema de manuseamento Hermle IH30/60 (ativo) Sistema de medição de ferramentas BLUM (LC50) Sonda da peça de trabalho BLUM (TC52) Precisão Dinâmica

Key data: 850 mm, 700 mm, 500 mm

Inv. Num. : 8976 Tipo: C 400 U Produtor: Hermle Criado: 2015 Parâmetros: Sistema de controlo: Heidenhain iTNC 530 Número de posições de empilhamento: 38 Número de eixos: 5 peças Curso do eixo X: 850 mm Curso do eixo Y: 700 mm Eixo Z de percurso: 500 mm Cone: SK40 Velocidade elétrica do fuso: 18000 1/min Arrefecimento do fuso: 40 bar Mesa rotativa Ø 650 mm A 91° / -139° C 360° Sistema de Medição de Ferramentas BLUM Sondas para peças de trabalho BLUM Acionamentos diretos de binário em eixos rotativos Transportador de cavacos Extração por névoa oleosa Roda eletrónica

This 5s FEHLMANN PICOMAX 90-HSC + Erowa automation was manufactured in 2005. It features a table size of 920x380 mm, with an impressive spindle speed of up to 35,000 rpm and a control system by Heidenhain TNC 530. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 90-HSC + Erowa automation we have for sale. Contact us for further details.

This 5s FEHLMANN PICOMAX 60-HSC vertical machining centre was manufactured in 2008. It features a table size of 920x380 mm and offers impressive spindle speeds of up to 36,000 rpm. With a robust weight of 3750 kg, this machine is designed for precision and durability. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 60-HSC machine we have for sale. Contact us for further details.

This 4-axis TAJMAC-ZPS H40 TREND was manufactured in 2004. It features a rotary table and two-pallet automatic changer, enhancing productivity and flexibility. The machine accommodates a maximum workpiece size of dia 600 x height 600 mm and supports up to 300 kg. Ideal for complex machining tasks, it includes a high-pressure cooling system and a laser tool probe. Contact us for more information about this machine.

Inv. Núm. : 8965 Tipo: FSQ 80 NC Produtor: TOS Criado: 1989 Parâmetros: Sistema de controlo: HEIDENHAIN NS 700 Comprimento da mesa de trabalho: 3000 mm Largura da mesa de trabalho: 800 mm Velocidade máxima vertical do fuso: 2500 1/min Curso no eixo X: 3000 mm Curso do eixo Y: 900 mm Eixo Z de percurso: 1000 mm Altura da máquina: 3500 mm Comprimento da máquina: 5660 mm Largura da máquina: 4400 mm Peso da máquina: 18000 kg

A máquina encontra-se em boas condições técnicas; após acordo prévio, é possível testá-la. A máquina está fora de funcionamento há cerca de um ano. O serviço regular de marca no valor de €5.000 (podemos documentá-lo) foi realizado pela última vez no final de 2023, após o qual a máquina esteve em operação limitada. É necessário determinar o estado dos parafusos e repará-los, se necessário. É necessário calibrar o indexador de 5 eixos. O eixo faz um barulho alto.

A máquina encontra-se em bom estado técnico, sendo possível testar após acordo prévio. A máquina esteve fora de operação durante cerca de um ano. O serviço regular de marca no valor de €4.000 (podemos documentá-lo) foi realizado pela última vez no final de 2023, após o qual a máquina esteve em operação limitada. O estado dos parafusos deve ser determinado e possivelmente reparado. O divisor de 5 eixos deve ser calibrado.

A máquina encontra-se em bom estado técnico, após acordo prévio é possível testá-la. Existe um manual completo em checo e alemão. Também temos uma sonda e acessórios (morsos, grampos, escotas, mandrils, etc.)

This 4-axis DECKEL MAHO DMC 55H duoBlock was manufactured in 2007. It features X, Y, Z movements of 560 mm, 600 mm, and 600 mm respectively, and a spindle speed of 12000 rpm. The machine includes a SK40 spindle taper, a 60-position tool magazine, and four 400x400 mm pallets with a 1-degree indexed 4th axis. Consider the opportunity to buy this DECKEL MAHO DMC 55H duoBlock horizontal machining centre. Contact us for more information about this machine.

This 5-axis Hyundai Wia HI-MOLD 750-5A vertical machining centre was manufactured in 2014. It features a spindle speed of 20,000 RPM, a tool magazine with 30 slots, and a rapid traverse rate of 50 m/min in all axes. The table can handle up to 500 kg, tilting from +30˚ to -120˚. Consider the opportunity to buy this Hyundai Wia HI-MOLD 750-5A vertical machining centre. Contact us for more information about this machine.

This 3-axis Hurco VMX 30i was manufactured in 2014. It features a 760x510x610 mm working envelope, a 1020x510 mm table, and a high-speed spindle at 12000 rpm with SK40 taper. The machine includes a 40-piece tool changer and a chip conveyor. Renishaw probes enhance precision. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 30i machine we have for sale. Contact us for more information about this machine.

This 4-axis HAAS MIKRON VCE 750 was manufactured in 1997. It features a table surface of 900x350 mm, a table capacity of 340 kg, and movements of X 750 mm, Y 410 mm, and Z 500 mm. The spindle operates at 8000 rpm with a power of 7.5 kW. Regular maintenance and recent updates ensure reliability. Consider the opportunity to buy this HAAS MIKRON VCE 750 vertical machining centre. Contact us for more information about this machine.

This 3-axis Mazak VTC-200B was manufactured in 1999. It features a Mazatrol PC-Fusion CNC 640 M control system, with X, Y, Z travels of 1120 mm, 510 mm, and 510 mm respectively. The machine includes a swarf conveyor, cooling through the spindle, and probes for tools and workpieces. Consider the opportunity to buy this Mazak VTC-200B vertical machining centre. Contact us for more information about this machine.

This 5-axis Hyundai Wia Hi-MOLD 560/5A vertical machining centre was manufactured in 2014. It features a table size of 1,250×600 mm, a maximum load capacity of 800 kg, and a high-speed spindle with 24,000 RPM and 33 kW power. The machine offers rapid feed rates of 50 m/min in all axes and a quick tool change time of 5.5 seconds. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia Hi-MOLD 560/5A machine we have for sale. Contact us for more information.

This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2008. It offers robust construction and precision for demanding machining tasks. If you are looking to get high-quality milling capabilities, consider the Okuma MA-400HA machine we have for sale. Contact us for more information.

This 3-axis Hurco VMX50i was manufactured in 2021. It features a robust SK40 spindle, capable of reaching speeds up to 12,000 rpm, and a large table surface of 1500 x 660 mm supporting up to 2000 kg. With X/Y/Z travels of 1270/660/610 mm and rapid traverse rates of 32/32/24 m/min, its ideal for dynamic machining tasks. Includes a 30/40 position automatic tool changer. Contact us for more information about this machine.

The Leadwell V80I vertical machining centre, crafted in 2008, is designed for precision milling applications. It operates with a Heidenhain 530 CNC system for reliable control. With travel distances of 2000mm on the X-axis, 1000mm on the Y-axis, and 760mm on the Z-axis, this machine accommodates larger workpieces on its 2040 x 1000 mm table. Powered by a 30Kw spindle, it reaches speeds up to 10,000 rpm and uses an SK 40 taper. For more information, please reach out to us.

This 3-axis DMG MORI DMC 650V was manufactured in 2014. It features a spindle speed of 12000 rpm, X/Y/Z travels of 650/520/475 mm, and rapid feeds up to 36 m/min. The machine includes a SK40 tool taper, a 20-position tool magazine, and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the DMG MORI DMC 650V machine we have for sale. Contact us for more information.

This 3-axis AXA DBZ vertical machining center was manufactured in 2012. It features a Heidenhain iTNC 530 system, a spindle speed of 10,000 rpm, and a tool magazine with 22 positions. The machine includes a swivel/rotary table SRTA 2-300 for 5-axis machining. Consider the opportunity to buy this AXA DBZ vertical machining center. Contact us for more information about this machine.

This 4-axis TAJMAC-ZPS H63 Standard was manufactured in 2005. It features a robust Siemens control system, X-axis travel of 1010 mm, Y-axis of 800 mm, and Z-axis of 1010 mm. The work table measures 800 mm in length and 630 mm in width. Ideal for precision machining, buy this TAJMAC-ZPS H63 Standard horizontal machining centre. Reach out for more information.

This 5-axis KOVOSVIT MAS MCV 1000 Speed 5AX was manufactured in 2011. It features a spindle speed range of 20-12,000 rpm and a spindle drive power of 33/45 kW. The machine can handle a maximum tool weight of 6.5 kg and includes a 30-tool magazine. With a table load capacity of 400 kg and dimensions of 5145 x 3665 x 3330mm, its ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the KOVOSVIT MAS MCV 1000 Speed 5AX machine we have for sale. Contact us for more information.