trabalho de chapa metálica usadas para venda (3,363)

sheet width: 2000 mmplate length: 1000 mmPunching capacity: 28 toweight of the machine ca.: 11.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 3035 mmplate thickness: 4.0 mm STplate thickness: 2.5 mm VAplate thickness: 6.0 mm ALUnumber of strokes - loaded: 20 Hübe/mincutting angle: 1.7 °work height max.: 900 mmControl: ELGO total power requirement: 8.5 kWweight of the machine ca.: 4400 kgrange L-W-H: 3416 x 2250 x 1760 mmEquipment:- robust NC electro-hydraulic guillotine shears- NC electro-motorized backgauge with ELGO control unit TYPE 85- Manual cutting gap adjustment- front support table incl. recessed grips- 1x stable side stop, with scale and tilting cam- 3x stable front support arms- 1x freely movable foot switch- front finger guard- Rear metal slide- EMERGENCY OFF button at the front- Operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 120 x 15 (d 750) mmI-beam section - upend: 60 x 10 (d 800) mmL-beam: 50 x 5 (d 1200) mmround material: 35,0 (d 800) mmbar material dia. max.: 70 x 2 (d 1200) mmsquare material: 50 x 40 x 3 mmbending speed: 4,3 m/minroll diam. toproll: 155 mmbore: 50,0 mmtotal power requirement: 1,5 kWweight: 320 kgrange L-W-H: 730 x 830 x 1350 mm Exhibition machine from 2023 with only approx. 2x operating hours Condition as NEW Special price on requestEquipment:- robust electro-motorized ring/profile bending machine- machine base frame, with rear shelf- horizontal and vertical work possible- 1x freely movable foot switch- segmented standard rollers (divided)- 2x motor-driven rollers- manual delivery of the top roller- analog position display of the top rollers (scale)- manually adjustable side/straightening rollers- CE mark / declaration of conformity- operating instruction ...

: neu : 2025 : 090131 : prompt, Zwischenverkauf v : Türkei : 4700 €: 109.71 €: 1 : 50 mm: 155 mm: 2 : 1.5 kW: 4,5 m/min: 60x10 mm / 500 mm, 40x10 : 100x15 mm / 450 mm, 60 x : 35x35 mm / 900 mm, 20x20 : Ø 35 mm / 600 mm, Ø 30 mm : Ø 70x2 mm / 1.000 mm, Ø 3 : 70x30x2 mm / 1.200 mm, 50 : 50x50x3 mm / 1.700 mm, 40 : 50x50x5 mm / 800 mm, 40x4 : 50x50x6 mm / 1.000 mm, 30 : 1050 mm: 750 mm: 1450 mm: 390 kg2 mech. driven rollsstrong cast steel constructionshafts made of special steel,hardened and groundtop roll manual adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdouble foot pedal forfor- and backward drivemachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11800 €: 226.56 €: 60 mm: 215 mm: 215 mm: 3 : 1.5 kW: 4 m/min: 80x20 mm / 1200 mm, 40x10 : 120x25 mm / 600 mm, 50 x : 50x50 mm / 800 mm, 20x20 : Ø 50 mm / 800 mm, Ø 20 mm : Ø 100x2 mm / 1600 mm, Ø 6 : 80x40x3 mm / 1400 mm, 40x : 70x3 mm / 1600 mm, 40x2 m : 70x70x7 mm / 1000 mm, 40x : 70x70x7 mm / 1200 mm, 40x : 1000 mm: 1400 mm: 1650 mm: 950 kg3 mech. driven rolls (brake motor)hardened shafts top roll hydraulic adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdouble foot pedal forfor- and backward drivemachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 260 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3100 mmheight: 120 mmwidth: 120 mm Brand New Die Block List Price: 9.738 Euro Special Price on RequestV-Openings:- 80.0 mm / 85° / R 10.0 with guide rollers- 50.0 mm / 85° / R 5.0 with guide rollers- 35.0 mm / 85° / R 4.0- 22.0 mm / 85° / R 2.5- 2x Mounting Screws incl. Link ChainThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5500 €: 106.15 €: 2.5 mm: 160 mm: 250 nm: 4 Stk.: 96 mm: 13 1/min: 1475 mm: 550 mm: 1200 mm: 320 kgreduction motor with brake systemmovement of rolls with foot pedaladjustable idle rollsteel shafts with bronze bushings4 set of rollscomplete with standuser manual in GERMAN or ENGLISHaccording to CE rulesALTERNATIVE (PRICE ON REQUEST):HIBKS 2,5 with hydraulic upper roll feedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mmplate thickness: 8.0 mmthickness at Niro-steel: 6.0 mmdistance between columns: 3100 mmdown holder: 16 Stückno. of strokes: max. 10 - 15 Hub/minoil volume: 160 ltr.cutting angle: 1.6 °back stop - adjustable: 6.0 - 750 mmControl: ELGO P9521 total power requirement: 18.5 kWweight: 6300 kgrange L-W-H: 3900 x 2300 x 1630 mmFeatures:- Robust electro-hydraulic swing beam shear- ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s- 1x stable side stop With T-slot, flip-stop, and millimeter scale- 2x stable front support arms- Electric cutting length limiter Cutting length limiter to increase the stroke rate/min.- Manual cutting gap adjustment Centrally operated on the right side stand- Front support plates- Front finger/interference guard- Inching operation with push buttons on the left c ...

sheet width: 1050 mmplate thickness: 3.3 mmpre-bending: 3.0 mmroll length: 1050 mmroll diameter: 90.0 mmmin. dia.: 130 mmengine output: 1.10 kWweight: 570 kgrange L-W-H: 1.800 x 800 x 1.130 mm Exhibition machine from 2026 With only approximately 2 operating hours Condition like new Special price upon requestFurnishing:- Robust electro-mechanical bending machine- 2x central rollers driven by an electric motor (top and bottom roller)- Top roller can be swiveled out manually, with folding bearing- including conical bending device- freely movable control panel- Lower roller manually adjustable, by hand wheel- asymmetrical roller arrangement- self-braking main motor- Safety device (safety line with switch unit)- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized side roller adjustment- Digital position display for motor-driven adjustable sid ...

sheet width: 3100 mmplate thickness: 13,0 mmthickness at Niro-steel: 8,0 mmdown holder: 14 Stückno. of strokes: 11 Hub/minoil volume: 310 ltr.cutting angle: 2,0 °throat: 350 mmtable height: 900 mmtotal power requirement: 22,0 kWweight of the machine ca.: 12200 kgrange L-W-H: ca. 4100 x 2300 x 2235 mm--------------------------------------------------heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------- Furnishing:- CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.tr ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 106340 €: 2009.83 €: 150 mm: 1000 mm: 1900 mm: 1475 mm: 2700 kg: 170 cm³: 150 x 7,1 mm: 6 x 7,11 mm: 150 x 9 mm: 141,3 x 6,55 mm: 141,3 x 6,55 mm: 168,3 x 9 mm: 168,3 x 9 mm: 64 x 6 mm: 88,9 x 3,65 mm: 110 mm: 150 x 45 stehend, 150 x 6 mm: 800 mm: 100 mm: 10 mm: 1 U/min: 15 kWTCPlus Control with 7 TouchscreenProgrammable bending speed for each individual bendPossibility to bend left and rightUsers manaulThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching capacity: 220 kNplate thickness: 8 mmworking area: 2535x1280 mmsheet thickness for stainless steel: 4-6 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090180 : prompt, Zwischenverkauf v : Türkei : 8300 €: 160.19 €: 1 : 50 mm: 152 mm: 162 mm: 3 : 1.1 kW: 4,5 m/min: 60x10 mm / 600 mm, 20x10 : 100x15 mm / 600 mm, 50 x : 35x35 mm / 600 mm, 15x15 : 35 mm / 600 mm, Dm. 20 mm : 70x2 mm / 1200 mm, Dm. 25 : 70x30x3 mm / 1500 mm, 30x : 50x50x3 mm / 1600 mm, 20x : 50x50x6 mm / 600 mm, 30x3 : 50x50x6 mm / 900 mm, 30x3 : 810 mm: 950 mm: 1500 mm: 500 kg3 mech. driven rolls (brake motor)hardened shafts top roll hydraulic adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdouble foot pedal forfor- and backward drivemachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2070 mmplate thickness: 25 mmpre-bending: 18 diameter of upper rolls: 320 mmside roll diameter: 260 mmdiameter of lower rolls: 320 mm: 26 kW: 8100 kg: 4700 x 2000 x 2200 mmFeatures:- Hydraulic side roller adjustment- Conical bending device- 2 driven rollers- Hardened rollers- Hydraulic folding bearing- Mobile control panel- Foot switch- Safety device- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 100 mmroll diameter: 315 mmbending speed: 5 m/minbending capacity - flat iron: max. 12 x 20 mm: 75 mmDrive: 11 kWweight: 2.600 kgrange L-W-H: 1950x1600x2100 mmEquipment / Accessories:- Two driven rollers- Hydraulic delivery of the upper roller- Digital display with memory function- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- Footswitch- standard roller setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 10500 €: 201.6 €: 1050 mm: 4 mm: 110 mm: 2.2 kW: 1100 mm: 750 mm: 1000 mm: 990 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS (PRICES ON REQUEST):hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50.0 tchamfer lenght: 1275 mmdistance between columns: 1040 mmcolumn arm: 250 mmram stroke speed: 225 mm/secwork speed: 0 - 9.8 mm/secreturn speed: 160 mm/secwork stroke: 215 mmdayligth: 512 mmtable height: 800 mmback stop - adjustable: 600 mmcontrol: DELEM DM 51 operating pressure: max. 300 baroil volume: 150 ltr.voltage: 400 Vengine output: 6.0 kWWeight: 4300 kgrange L-W-H: 1930 x 1510 x 2390 mm current new price approx. 80.000 euros special price on request good / well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=5L8L2AYv0PU-------------------------- -----------------------------PLACKE electro-hydraulic CNC press brakespecially developed for the production of small partsThe advantages:• Low energy consumption• High operating comfort• Wide range of applications• Fast, robust, low-noise• With CNC control as standard-- ...

sheet width: 6020 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmback stop - adjustable: max. 1000 mmwork height max.: 1030 mmno. of strokes: 5 - 10 Hub/mincutting angle: 0.5 - 3.0 °down holder: 33 StückControl: SC 100 T engine output: 11.0 kWweight of the machine ca.: ca. 27000 kgrange L-W-H: 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request- in checked conditions - machinevideo - https://www.youtube.com/watch?v=qH3uqGNZZp8Equipment:- Robust electro-hydraulic guillotine shear Design: Guide rail- HACO CNC control model SC 100 T, pivoting at the front left Control unit with LCD display Pre-selected positioning of the backgauge Digital display of actual position Electro-hydraulic cutting angle adjustment Electro-hydraulic cutting gap adjustment Programmable retraction from the backgauge Programmable cutting length limitation Automatic + manual pr ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 59900 €: 1132.11 €: 2050 mm: 3 mm: 2 mm: 4 mm: Motorisch : 3350 mm: 2200 mm: 1900 mm: 3800 kg: 1000 mmCNC control with tabular programming- 15,6", touchscreen controller on swivel arm- tabular programming by entering the axes values- open or drop hemming function- multi radius bending function as by pressing or by bending- programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length- piece counter- autorisiation with password- 128GB HDD allows almost unlimited data storage- remote service connection via WLAN- detailled alarm, tool and paramter pageMotorized drive (servo motors) of the upper and bending beam (Z and Y axes)Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration,with ball rollers in the sheet metal insertsUp ...

sheet width: 2100 mmplate thickness: 8,0 mm STpre-bending: 6,0 mm STdiameter of upper rolls: 190 mmside roll diameter: 150 mmdiameter of lower rolls: 170 mmtotal power requirement: 3,0 kWweight of the machine ca.: 3.290 kg.dimensions of the machine ca.: 4042 x 1380 x 1254 mmFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solution  ...

tube diameter: 33,7 x 3,4 GAS mmtube diameter: 35,0 x 2,5 STAHL mmtube diameter: 35,0 x 1,5 EDELST mmbending radius min.: R10 - R 190 mmbending angle max.: 0 - 180 °tool taper: 6-kant 40 mmvoltage: 230 Vtotal power requirement: 0,9 kWweight of the machine ca.: 23,0 kgDescription:- MediBender 070 digital- with maximum bending performance for 35 x 2.5 mm steel tubes- Excellent bending quality with very tight bending radii. (from 2 x tube diameter) and bending angles between 0° and 180°- Easy to operate- High accuracy and reliability- Fast tool changes (within seconds)- Easy to transport- Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0007 : 217 €: 1 : 835 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 /minPunching force: 60 to throat: 250 mm: bis max. Ø 40x11 mm: 350x15 mm: 350x15 mmL-beam 90°: 120x120x10 mm: 45 mmsquare edge steel: 40 mm: 10 mm: Aufnahme bis max. 150x10 engine output: 5,5 kWweight: ca. 1600 kgBasic equipment:- Flat steel shears with knife set- Angle shears with knife set- Punch with quick release device for punches up to 40 mm- Support table for punching device- Triangular notching device- Support table for notching- bending station- Bending stamp with matrices V 40 and V 70- electrical contact stop (1 meter)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0039 : 180 €: 1 : 415 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 /minPunching force: 60 to throat: 500 mm: 40x11 mm: 350x15 mm: 350x15 mmL-beam 90°: 120x120x10 mm: 45 mmsquare edge steel: 40 mm: 10 mm: Aufnahme bis max. 150x10 engine output: 5,5 kWweight: 2012 kgBasic equipment:- Flat steel shears with knife set- Angle shears with knife set- Punch with quick release device for punches up to 40 mm- Support table for punching device- Triangular notching device- Support table for notching- bending station- Bending stamp with matrices V 40 and V 70- electrical contact stop (1 meter)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35.0 tchamfer lenght: 1250 mmdistance between columns: 1095 mmstroke - stepless adjustable: 215 mmcolumn arm: 410 mmtable height: 800 mmdayligth: 455 mmworking feed: 10.0 mm/secreturn speed: 56.0 mm/secwork height max.: ca. 875 mmControl: DM 51 Number of working hours: ~ 13.300 hoil volume: 80.0 loperating pressure: max. 240 barvoltage: 380 Vtotal power requirement: 4.0 kWweight: 2500 kgrange L-W-H: 1700 x 1450 x 2250 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=Gn6PZEMmnmYFeatures:- Robust CNC-controlled hydraulic press brake- With DELEM CNC control unit DM 51” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Program + tool storage possible Swiveling control panel, front left- CNC electric motor-driven backgauge (X axis)- CNC electric motor-driven height adjustment of the stop (R axis)- 2x manually adjustabl ...

: gebraucht : WA0143 : 690 €: 1 : 3100 mm: 90 mm: 25 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 28 min.Punching force: 110 to: 40x20 mmflat steel: 600x15 oder 400x20 mmL-beam 90°: 160x160x16 mmL-beam 45°: 70x70x7 mm: 50 mmsquare edge steel: 50 mm: 13 mmthroat: 300 mmBasic equipment:- Complete set of blades for flat steel shears- Complete knife set for bar cutter- Complete knife set for angle steel shears- Compl. Standard punching device- Stamp quick release device for punches up to 40 mm diameter- Rectangle notch compl. with hold downs- Complete knife set below for rectangular notching- Upper tool for rectangular notching- Support table for flat material- Punching table with stop- Notch with stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

punching pressure: 28.0 tpunching cross-cut in cmm: 31 in 7.0 mm STthroat: 250 mmdayligth: 223 mmno. of strokes: 10 - 30 Hub/minoil volume: 32.0 ltr.work height max.: 1033 mmtotal power requirement: 3.0 kWweight of the machine ca.: 553 kgdimensions of the machine ca.: 730 x 540 x 1530 mFurnishing:- Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm- Free: LED lighting in the punching area- Swiveling scraper (plates exchangeable)- Various material support tables are available separately- Brace- 2-step foot switch, with double press for grain search function- electrical controls- Stroke length and stroke position continuously adjustable- integrated hydraulic unit with oil filling- Performance specifications apply to a material strength of 450 N/mm²- Main connection cable and plug for 16 amps are not included in ...

sheet width: 1250 mmplate thickness: 5,5 mmpre-bending: 5,0 mmroll length: 1280 mmmin. dia.: 210 mmroll diam. toproll: 140 mmweight: 1365 kgrange L-W-H: 2.020 x 900 x 1.200 mmStandard features:- Central rollers via electric motor, planetary reduction gear andGear drive driven- Swivel top roller- Main engine with brake device- Conical bending device- Mobile controller and foot pedal- CE mark / Declaration of ConformityAdditional equipment:- motorized rear roller adjustment- Digital display for back roller- induction hardened rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.