trabalho de chapa metálica usadas para venda (3,363)

I - beam section - flat steel: 140 x 140 x 13 mmI-beam section - upend: 120 x 120 x 13 mmL-beam: 130 x 130 x 12 mmround bar steel: 85 mmbending capacity - flat iron: 125 25 mmflat steel: 65 x 65 mmincluding various rollers:Pipe Ø:219 mm (tool/roller Ø 535 mm)140 mm (tool/roller Ø 420 mm)273 mm (tool/roller Ø 520 mm)203mm168.3 mm (tool/roller Ø 500 mm)75 mm (tool/roller Ø 400 mm)49 mm (tool/roller Ø 420 mm)48.3 mm (tool/roller Ø 420 mm)22.5 mm (tool/roller Ø 420 mm)32/32.5 mm (tool/roller Ø 420 mm)60 mm (tool/roller Ø 420 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 400 mmplate thickness: 4 mmweight of the machine ca.: 0.3 tdimensions of the machine ca.: 0.5x1x2.2 mwww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 620 mmstroke: 0-100 mmhole diameter in sheet thickness: 40 in 20 mmno. of strokes: 49 Hub/minControl: total power requirement: 15 kWweight of the machine ca.: 3.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6.5 mmthickness at Niro-steel: 5.0 mmangle adjustable from - to: 30 - 140 Gradno. of strokes: ca. 50 Hub/mintable:: 950 x 1030 mmblade length: 220 x 220 mmtotal power requirement: 4.0 kWweight: 800 kgrange L-W-H: 1100 x 950 x 1280 mm current new price approx. 20.000 euros good condition () special price on requestEquipment:- electro-hydraulic notching machine- multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools- manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment- large / stable work table- 2x new angle stop, adjustable- automatic cutting gap adjustment- 1x freely movable foot switch- connection cable + 16A plug- cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VAThe data for this ad was created with ModulMWS - the software solution of LogoTe ...

: 500 kNhole diameter in sheet thickness: Ø 27 in 13 / Ø 28 in 10 mmno. of strokes: 23 Hub/minthroat: 130 mmstroke: 30 mmtotal power requirement: 3 kWweight of the machine ca.: 295 kgOverall size: 1100x900x1550 mmStandard equipment:- punching tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 50 mmpre-bending: 40 mmdiameter of upper rolls: 540 mmdiameter of lower rolls: 500 mmside roll diameter: 440 mmengine output: 55 kWtotal power requirement: kWweight of the machine ca.: 40 tdimensions of the machine ca.: 6,7 x 3,0 x 3,0 mWith:Cone bending deviceInduction hardened rollsDigital readout for side rollsFully welded steel (St-52) frameSeparate moveable control panelBending speeds, slow and fastElectronic ParallelismAll rolls are mounted in spherical roller bearingsHydraulically opened/closed drop end controlled from control panelActivation of cone rolling function and position adjustment via buttons onthe control panelCentral rolls (top and bottom rolls) driven by hydraulic motors andplanetary gear reducersElectro – hydraulic calibrationOPTIONAL FEATURES AND ACCESSORIES:Center support: 21.468,75 €Side supports (left and right): 17.346,7 ...

sheet width: 4100 mmplate thickness: 8,0 mm STpre-bending: 6,0 mm STdiameter of upper rolls: 300 mmside roll diameter: 210 mmdiameter of lower rolls: 270 mmtotal power requirement: 7,5 kWweight of the machine ca.: 9.930 kg.dimensions of the machine ca.: 6532 x 1730 x 1489 mmFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solution  ...

puncher: 70.0 tsquare edge steel: 45.0 x 45.0 mmround bar steel: 45.0 mmL-beam: 150 x 150 x 13 mmhole punching press: capacity (dia. x thick.): Ø 27.0 x 20 mmshear: flat material: 450 x 15 / 300 x 20 mmthroat: 300 mmwork stroke: 70.0 mmwork height max.: 1095 mmtotal power requirement: 9.0 kWweight: 1925 kgrange L-W-H: 1800 x 1200 x 2000 mm current new price approx. 25.000 euros special price on requestEquipment:- electro-hydraulic profile steel shears with 4x work stations flat steel shears profile steel shears hole punch notching station- driven by two hydraulic cylinders- stepless stroke adjustment- support table at hole punching & notching station- material stripper- side storage options- 2x freely movable foot switches- operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

punching pressure: 45.0 tpunch diameter: 22 in 15.0 mmpunch diameter: 38 in 8.0 mmround bar steel: 30.0 mmsquare edge steel: 25.0 L-beam: 100 x 10.0 mmshear: flat material: 300 x 12.0 mmadjustment of stroke: 0 - 55 mmwork height max.: 940 / 1140 mmstrokes per minute: 34 punch diameter: max. 110 mmvoltage: 400 Vtotal power requirement: 4.5 kWweight: 1245 kgdimensions: 1520 x 590 x 1700 mm In good condition () New price ~ 13.000 Euro Special price upon requestFeatures:- Robust electro-hydraulic profile steel shear- With multiple workstations: Punching station Flat steel shear Angle/profile steel shear Notching station- Continuously adjustable stroke- Very compact design- Support table at the notching and punching station- Side support surfaces- 1x freely movable foot switch- Central lubrication system- Connection cable + connectorThe data for this ad was created with ModulMWS - the softwa ...

: gebraucht : 2023 : 9691 : prompt, Zwischenverkauf v : Türkei : 24600 €: 1 : 85 mm: 247 mm: 3 : 7.5 kW: 80x20 mm / 500 mm, 30x10 : 120x30 mm / 650 mm, 50x10 : 50x50 mm / 500 mm, 30x30 : Ø 50 mm / 500 mm, Ø 20 mm : Ø 100x2,5 mm / 1.300 mm, : 80x40x4 mm : 70x70x4 mm : 80x8 mm / 1.200 mm, 30x3 : 80x8 mm / 800 mm, 30x3 mm : 1580 mm: 1200 mm: 1410 mm: 2350 kgdemo machine / mint conditionnet price3 driven rolls (hydromotor and planetary gear)strong welded steel constructionlower rolls hydr. adjustabledigital read-out for lower rolls positionsplane rollslateral rolls (forward-backward hydraulic, rest manual)horizontal and vertical operationControl console forfor- andbackward drivemachine and equipment according to theCE regulationsINCL. OPTION: CONTINUOUS SPEEDWE HAVE MORE THAN 235 REFERENCES!BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum se ...

sheet width: 2100 mmplate thickness: 6 mmpre-bending: 4 mmupper roll diameter: 160 mmlower roll diameter: 140 mmside roll diameter: 120 mmtotal power requirement: 2,2 kWOverall size: 4140x1040x1140 mmweight of the machine ca.: 2.350 kgAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 3 mmpressure: ? ttotal power requirement: 3,5 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,3 x 0,9 x 1,1 mNo. 3549Notching machine BOSCHERT K 30 / 120 MINI No. 1Working area: Table 800 x 450Drive: 3,5Foot switchTable 800 x 450 mm with T-slots 45° / 90° / 180° swivel 120° (2 x60°)Space requirement approx. 1300 x 900 x 1100 mmWeight approx. 850 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mmplate thickness: 3,3 mmpre-bending: 3,0 mmroll diameter: 90 mmmin. dia.: 130 mmtotal power requirement: 1,1 kwweight of the machine ca.: 570 kgdimensions of the machine ca.: 2100 x 800 x 1130 mmDomestic equipments:- Asymmetrical 3-roll round bending machine with motor drive- Upper roller swung out- Conical bending device- Main engine with brake deviceAdditional equipment:- motorized rear roller adjustment- Digital display for back roller- induction hardened rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mmplate thickness: 35 mmpre-bending: 28 mmupper roll diameter: 540 mmlower roll diameter: 541 mmside roll diameter: 440 mmtotal power requirement: 37 kWweight of the machine ca.: 48.100 kgMachine dimensions approx.: 7670x3000x2930 mmAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6,0 mmthickness at Niro-steel: 4,0 mmdistance between columns: 3100 mmno. of strokes: 18 Hub/mindown holder: 14 Stückoil volume: 150 ltr.cutting angle: 1,2 °control: CYBELEC CybTouchtotal power requirement: 11,0 kWweight: 6300 kgrange L-W-H: 4.000 x 2.100 x 1.640 mm--------------------------------------------------electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------- Furnishing:- CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel ...

: gebraucht : WA0102 : 292 €: 1 : 835 mm: 80 mm: 25 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2020 mmplate thickness: 2.0 mmdistance between columns: 2100 mmangle adjustable from - to: 130 Gradtotal power requirement: manuell weight of the machine ca.: 1850 kg.range L-W-H: 3100 x 725 x 1350 mm Exhibition machine - like NEW not yet in use () Special price on requestEquipment:- heavy/manual swivel bending machine, with counterweight- long service life thanks to robust welded steel construction- universally applicable for metalworking shops and craft businesses- quick and easy bending process using a bow handle- all bearings and guides in a stable design- easy adjustment of the upper beam for efficient work- manual adjustment of the lower beam- manually adjustable angle fixed stop with analogue degree displayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0147 : 890 €: 1 : 3050 mm: 105 mm: 85 mm(screwed 5x from above)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 6700 €: 129.31 €: 1270 mm: 2.5 mm: 90 mm: 6 m/min: 1.1 kW: 1850 mm: 700 mm: 1200 mm: 520 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rolltiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mmplate thickness: 6 mmno. of strokes: 20 Hub/minstroke: 750 mmMotor Capacity: 11 kWoil volume: 160 lweight of the machine ca.: 5.500 kgdimensions: 3860 x 2560 x 1560 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090203 : prompt, Zwischenverkauf v : Türkei : 3810 €: 1 : 1020 mm: 1.5 mm: 500 mm: 1950 mm: 1000 mm: 1150 mm: 420 kgwelded steel constructionwith manual hold down unitback gauge adjustable by handwheelusers manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending diam. - max.: 36.0 mm STcutting thickness max.: 36.0 mm STmotor: 1450 U/minoil volume: 32.0 lmotor: 380 Volt 50 Hztotal power requirement: 5.5 kWweight: 650 kgrange L-W-H: 1470 x 1200 x 1020 mm Exhibition machine - NEW ()Equipment:- Maximum performance, minimum consumption- hydraulic combination machine for bending and cutting processes for e.g. structural steel or solid material- Bending mode with 3x different angle settings- manual and automatic mode selectable- simultaneous bending and cutting processes when the machine is in operation- ECO mode = hydraulic pump only runs when the foot switch is pressed- freely movable foot switch- operating instructionstechnical data:- steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm- steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm for 2 p ...

hole diameter in sheet thickness: Ø 30 in 12 mmhole diameter in sheet thickness: Ø 19 in 19 mmpressure capacity max.: 45 toweight of the machine ca.: 1.700 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 4900 €: 109.71 €: 1050 mm: 3 mm: 2 mm: 90 mm: 2080 mm: 700 mm: 1250 mm: 410 kg3 rollsasymmetric rolls - prebending2 rolls driven by handwheellateral roll adjustable by handwheellongitudinal grooves in lower and lateral rolltiltable upper rollconical rolling deviceuser manual in GERMANThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 10.0 mm STpre-bending: 8.0 mm STdiameter of upper rolls: ~ 205 mmside roll diameter: ~ 195 mmControl: konv. oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 5.5 kWweight: 3200 kgrange L-W-H: 4500 x 1500 x 1300 mmFeatures:- Robust electro-hydraulic 3-roll bending machine- 3-roll concept offers a wide range of bending and rounding options- Pivoting control unit at the front Operation - Control of all rolls and machine axes Digital position display Manual operation via joysticks- Diameters of up to 1.1 times the top roll diameter are possible- Forged and hardened rolls with a hardness of 53-55 HRC- Low-maintenance, stable machine design- Sturdy welded steel construction- Electro-hydraulic folding bearing for easy pipe removal- Pressure gauge / pressure indicator for the rolls- Safety device (safety lanyard with switch unit)- Operating instruc ...

plate thickness: 8.0 mm STplate thickness: 5.0 mm VAtable-size: 1000 x 950 mmblade length: 200 x 200 mmstrokes per minute: 60 H/minadjustable: Winkel 30°-140° mmwork height max.: ca. 950 mmoil volume: 60.0 lengine output: 4.0 kWweight of the machine ca.: 1200 kgrange L-W-H: 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 eurosFurnishing:- Robust electro-hydraulic notching machine- with adjustable angle, electro-hydraulic adjustment- Adjustment by hand wheels (left + right knife segment)- hardened knives also for cutting stainless steel- front panel- electro-hydraulic knife clamping- Inching mode for setting the shear blades selectable (manual mode)- planed table surface, with T-slots to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- 2x blank holders- 1x free moving footswitch- front scrap switc ...

plate thickness: 6.5 mmthickness at Niro-steel: 5.0 mmangle adjustable from - to: 30 - 140 Gradno. of strokes: ca. 50 Hub/mintable:: 950 x 1030 mmblade length: 220 x 220 mmtotal power requirement: 4.0 kWweight: 800 kgrange L-W-H: 1100 x 950 x 1280 mm current new price approx. 25.000 euros good condition () special price on requestEquipment:- electro-hydraulic notching machine- multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools- manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment- large / stable work table- 2x new angle stop, adjustable- automatic cutting gap adjustment- 1x freely movable foot switch- connection cable + 16A plug- cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VAThe data for this ad was created with ModulMWS - the software solution of LogoTe ...

plate thickness: 6.0 mm STthickness at Niro-steel: 4.0 mmplate thickness: 8.0 mm ALUangle adjustable from - to: 30 - 140 Gradtable:: 950 x 890 mmblade length: 220 x 220 mmstroke: 35 H/minwork height max.: 1150 mmtotal power requirement: 3.0 kWweight: 800 kgrange L-W-H: 1200 x 1200 x 1400 mm New price approx. 20.000 euros Special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=QmUbaV41BfAEquipment:- electro-hydraulic notching machine with adjustable angle 30° – 140°- cutting capacity up to 6.0 mm sheet thickness (R42/mm2)- made of the special spheroidal cast iron GS500.- the cutting movement takes place from top to bottom- robust work table made of steel with conical grooves which ensure optimal adhesion of the stop angles- the scales are embossed- automatic cutting gap adjustment (patented)- system for the automatic adjustment of the gap betwee ...

Punching capacity: 165 kNworking area: 2070 x 1280 mmplate thickness: 6,4 mmcontrol: CC 220 workpiece weight: 150 kgpunch diameter: 76,2 mm: 80 m/min: 55 m/minweight of the machine ca.: 8000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2004 : 9726 : prompt, Zwischenverkauf v : Türkei : 6750 €: 1 : 1350 mm: 3 mm: 35 1/min: 1.5 °: 550 mm: 3 kW: 2 Stk.: 850 mm: 400 mm: 1700 mm: 1350 mm: 1200 mm: 950 kgmanualback gaugeautomatic sheet hold downhold down with rubber padsmoveable foot switchside support arm2 supporting armsuser manual in GERMANdoes not complie with the German UVV and Austrian AMVOBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return policyDetails:https://www.hesse-maschinen.com/en/lp/used-machinesThe data for this ad was created with ModulMWS - the software solution of L ...