trabalho de chapa metálica usadas para venda (3,366)

Dimensions (L/W/H): 8421x2250x2250 mmWeight: 5500 kgTotal power requirement: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8421x2250x2250 mmWeight: 5500 kgTotal power requirement: 17 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3700x2400x1470 mmWeight: 1500 kgTotal power requirement: 8,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8421x2250x2250 mmWeight: 5500 kgTotal power requirement: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2985x2160x2000 mmWeight: 2000 kgTotal power requirement: 30 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x1220x1300 mmWeight: 1050 kgTotal power requirement: 16,1 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2985x2160x2000 mmWeight: 2000 kgTotal power requirement: 30 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4040 mmplate thickness: 4,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 7,50 tdimensions of the machine ca.: mMotorized adjustable backgauge with digital display up to 1000 mmPneumatic sheet metal supportSide fence and table extensionsCut length limiterCut edge lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMotorized backgauge with digital displayManual kerf adjustmentVariable cutting lengthCutting edge illuminationNew bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 10,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 10,00 tdimensions of the machine ca.: mMotorized backgauge up to 1000 mm with digital displaySide fence and table extensionsCut length limiterCut edge lightingNote: Backgauge is slightly inaccurate (+/- 1 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tchamfer lenght: 2050 mmdistance between columns: 1550 mmthroat: 255 mmstroke: 165 mmdayligth: 475 mmworking feed: 9,8 mm/secreturn speed: 117 mm/secajustment speed: 150 mm/sectotal power requirement: 5,5 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: 2300 x 1500 x 2470 mmEquipment:- DELEM DA65 CNC control- Electric backgauge (X-axis), 600 mm- Hydraulic upper tool clamping- Front light barrier- Side and rear protective grilles- Manually adjustable stop bar, foldable (R+Z-axis)- Upper tool- 2x support arms- Machine feet- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 750 mmplate length: 1250 mmplate thickness: 4 mmtable surface area: 1600 x 1050 mmno. of strokes: 180 Hub/minmax. punching diameter: 105 mmpunching pressure: 25 ttotal power requirement: 4,0 kWweight of the machine ca.: 1,8 tdimensions: 1,9 x 1,9 x 1,7 mPunching and nibbling machine- Digital readout for X and Y axis- Tool cabinet with toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2 mmdistance between columns: 1020 mmbending angle max.: 135 °total power requirement: 0 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 1350 x 850 x 1175 mMax. bending angle 135°Manually operated with auxiliary spring on both sides.Upper beam opening 40 mm,Upper and lower beams segmented,Segment division: 25-30-35-40-45-50-75-100-150-200-270 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4 mm STplate thickness: 3 mm VAblade length: 225 mmengine output: 3,5 kWweight of the machine ca.: 650 kgdimensions of the machine ca.: 1250 x 900 x 1100 mmFeatures:- 2x miter stops- 90° fixed angle- Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3050 mm: 12,0 mm: -: 0,5-3,0 °: 1000 mmtable height: 930 mmwork height max.: 930 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 600 mmz-travel: 600 mmcontrol: Heidenhain TNC 426spindle nose: 100-700 mmwork table:: 1.080 x 580 mmworkpiece weight max.: 550 kgT-slots: 7 Stk.T-slot - width: 14 mmtool piece magazine with: 36 Plätzenweight of tools max.: 8 kgtool length - max.: 340 mmtotal power requirement: kWweight of the machine ca.: 6,2 tdimensions of the machine ca.: 4.790 x 5.330 x 2.905 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mmplate thickness: 3 mmrear stop: von Hand, 750 mmnumber of support arms: 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 1,5 mmdaylight opening: max. 85 mmweight of the machine ca.: 240 kgdimensions of the machine ca.: mSmallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness sLowering capability of the lower and bending beams 20 mmOn this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring.The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned.The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!The data for this ad was created with ModulMWS - the software sol ...

blade length: oben 211/unten 180 mmplate thickness: max. 6 mmround bar steel: max. 13 mmweight: ca. 19 kgSturdy shears body of quenched and tempered steel. Moving blade guides free of play (with low friction losses), blades of special tool steel, specially hardened and ground. Lever arm with counterweight spring for protection in the event of accidents, all pivot pins adjustable, all models with steplessly adjustable clamping arm.With compound action. Cuts sheet metals and round steel bar.Colour: Red-brownThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 48,3 mmwall strength: 3,25 mmbending radius min.: max. 180 mmBending speed: 20 °/sectotal power requirement: 2,4 kWweight of the machine ca.: 700 tdimensions of the machine ca.: 3880 x 800 x 1250 mDescription:Round tube steel (S235): 60.0 x 6.0 mmRound tube stainless steel (S 355): 60.0 x 4.0 mmSquare tube steel: 50 x 50 x 4.0 mmRectangular tube steel: 60 x 40 x 2.0 mmmax. usable length: 3048 mmBending speed: 10°/secincluding tools (see photos)Mandrel is no longer available, can be retrofittedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bobina de mandrela dupla peso de cada lado: 1 tonelada Largura do material: 200 mm Diâmetro exterior da bobina: 2.050 mm Faixa de expansão: 350 - 640 mm Velocidade: 40 s.p.m. Potência necessária: 5,2 kW Peso da máquina aprox.: 2,2 tonelada

Desbobinador Peso da bobina: 2,5 tonelada Largura do material: 50 - 500 mm Diâmetro exterior da bobina: 1400 mm Faixa de expansão: 420 - 520 mm Nivelador / Endireitador Largura do material: 500 mm Número de rolos de nivelamento: 9 pcs. Diâmetro dos rolos de nivelamento: 50 mm Número de rolos de pinça: 2 pcs. Espessura do material: 6 mm Secção transversal: 3000 sq mm Velocidade de alimentação: 6 - 24 m / min