mandriladoras e centros de usinagem usadas para venda (3,216)

: 0550 mm: 410 mm: 480 mm: 650x410 mm: BBT 40 : 10.000 U/minMotor Capacity: 7,5/11 kWmax. table load: 500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0760 mm: 450 mm: 500 mm: 900x450 mm: BBT 40 : 10.000 U/minMotor Capacity: 7,5/11 kWmax. table load: 850 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0760 mm: 430 mm: 460 mm: 900x410 mm: SK 40 : 8.000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mmthroat: 330 mmbore stroke: 180 mmtable surface area: 765 x 620 mm0: 130 - 1750 U/minfeed: 0,1 - 0,2 - 0,3 mm/Utool taper: MK 4 total power requirement: 3,0 kWweight of the machine ca.: 0,7 tdimensions: 1,2 x 0,8 x 2,15 mDrilling machine with:Power feed2 gear stagesTapping attachmentFootswitchMachine lightCoolant systemEmergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmarm length: 950 mmturning speed range: 51 - 1000 U/minturning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mmfeed range: 0,075 x 0,3 mm/mintable surface area: 1200 x 510 mmtotal power requirement: 2 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 1,8 x 1,2 x 2,25 mHigh-speed radial end mill with- Thread cutting attachment- Vertical table 750 x 620 mm- Horizontal table 1200 x 510 mm- Emergency stop device- DocumentationMachine-No. 445The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmarm length: 1230 mmtable surface area: 1200 x 500 mmbore stroke: 180 mmfeed - independent: 0,10 - 0,15 - 0,20 - 0,30 mmturning speeds: 45 - 1370 U/mintaper MK: 4 total power requirement: 2,7 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,2 x 1,8 x 2,3 mQuick radial with:- Feed- Thread cutting deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 280 mmbore stroke: 145 mmtaper MK: 3 MKtable-size: 540 x 480 mmfeeds: 0,08 bis 0,32 mm/Uturning speeds: 180 - 2000 U/mintotal power requirement: 3,0 KWweight of the machine ca.: 0,9 tdimensions: 1,2 x 0,8 x 2,4 mColumn drilling machine with:- Power feed- Thread-cutting attachment- Coolant pump- Machine light- Incl. machine vice- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drilling capacity diameter max.: mmtable length: mmtable width: mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 200 mmProcessing width on table: 6000 mmProcessing height on table: 3150 mmProcessing depth: 1985 mmSlide cross-section: 530 x 550 mmtable load: 20 tPlate field size: 11.200 x 5.550 mmtool taper: SK 100 total power requirement: 83 kWweight of the machine ca.: 173 tdimensions of the machine ca.: mSpindle diameter: 200 mmMachining width (X-axis): 6,000 mmMachining height: 3,150 mmMax. machining depth: 1,985 mmRam cross-section: 530 × 550 mmTable load capacity: 20 tFloor plate area: 11,200 × 5,550 mmTable model: S20 MPTable size: 2,200 × 2,500 mmTool holder: SK 100Total power requirement: 83 kWMachine weight: approx. 173 tIncludes large and small angular milling headsInternal reference (OB No.): 22979X-axis machining width: 6,000 mmIncludes 6 floor plates, each 5,600 × 1,850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 105 mmx-travel: 1200 mmy-travel: 1000 mmz-travel: 325 mmadjustment of cross-rail: 785 mmdistance between columns: 1600 mmdistance spindle - column min./max.: 215 / 1100 mmspindle feeds - stepless: 1 - 6000 mm/minspindle taper: ISO 40 spindle turning speed - stepless: 40 - 1800 U/mintable surface area: 900 x 1500 mmworkpiece weight: 2000 kgspindle drive: 5 kWControl: Heindhain TNC 410 total power requirement: KVAweight of the machine ca.: 6 tdimensions of the machine ca.: 3,3 x 3,0 x 2,9 mmechan. Overhauled in 2002 and equipped with CNC control- CNC control Heidenhain TNC 410- RENISHAW sensor OMP 40The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2017 : 3901 : China : 8490 €: 1 : 6790 €: 32 mm: MK 4 : 300 - 1.000 mm: 32 - 2.500 (16) U/min: 1760 mm: 800 mm: 2080 mm: 1600 kg: 530 - 1.000 mm: 2.2 kW: 240 mm: 250 mm: 0,75 kW: 0,10 - 1,25 (8) mm/Ubox table 600 x 455 x 455 mmcoolant equipmentmachine lampmechanical clamping for height adjustment and spindle stockelectr. clamping for arm rotationmachine and equipment according to the CE-regulationsoperating manual in GERMAN and ENGLISHBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return policyDetails:https://www.hesse-maschinen.com/en/lp/used-machi ...

: gebraucht : 2021 : 3966 : prompt, Zwischenverkauf v : Taiwan : 15600 €: 1 : 12480 €: 42 mm: MK 4 : 280 - 1.100 mm: 44 - 1.500 (12) U/min: Stahl: M 25, Guss: M 38 : 1880 mm: 870 mm: 2210 mm: 1800 kg: 470 - 1.270 mm: 0,05 - 0,15 (3) mm/min: 2.2 kW: 260 mm: 280 mm: 1.725 x 715 x 180 mm: 0,75 kW: 635 x 520 x 415 mm: 2530 mmDEMO MACHINEleft/right rotationautomatic feeddrilling depth limitmanual headstock adjustment with mechanical clampingelectric height adjustment of extension arm and mechanical clampingmechanical clamping of swivel movement of extension armcentral operation panel on the front sidepower load readout for drilling spindlehand wheel for spindle fine feedcoolant equipmentmachine lampbox tablemachine and equipment according to the CE-regulationsoperating manual in GERMAN and ENGLISHBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum sec ...

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: total power requirement: --- kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1100 mmy-travel: 610 mmz-travel: 610 mmcontrol: Heidenhain 530 total power requirement: kWweight of the machine ca.: 7800 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 935 mmy-travel: 850 mmz-travel: 650 mmcontrol: Heidenhain TNC 640 Main spindle:: turning speed range - main spindle: 20000 min/-1power capacity - main spindel: 35 kWtool taper: SK 40 work table:: table surface area: 1000 x 750 (dia 850) mmmax. table load: 1500 kgtool magazin:: number of toolpositions: 60 pos.tool taper: SK40 feeds:: feed speeds: 40.000 mm/minrapid traverse: 40 m/minAccelaration: 5 m/s²c-axis: 360 °A-Axis: +/- 120 °total power requirement: 46 kVAweight of the machine ca.: 14 tdimensions of the machine ca.: 3,1 x 4,4 x 3,2 m5-axis universal machining centre equipped with:- Heidenhain TNC 640 CNC control- 60-position ATC (SK 40)- Heidenhain TS 460 touch probe- Chip conveyor with coolant- Paper belt filter- IKZ 40 bar- Blum laser tool measurement system- NC swivelling rotary table, diameter 850 x 750 mm16,800 spindle hours and 48,000 hours of operation.The d ...

x-travel: 800 mmy-travel: 950 mmz-travel: 1020 mmControl: SIN840D sl B - axis: 360 x 0,001 °A - axis: -180 / +45 x 0,001 °feed x-axis: 1 - 65.000 mm/minfeed y- axis: 1 - 50.000 mm/minFeed z- axis: 1 - 80.000 mm / min.rapid traverse X/Y/Z: 60 / 50 / 80 m/minspindle turning speed - stepless: 1 - 16.000 U/minpower capacity at 100 % load: 25,00 kWpower capacity at 40 % load: 35,00 KWmax. torque at 40% / 100% load: 223 / 160 Nmspindle diameter in front bearing: 80 mmtool taper: HSK-A63 tool magazin:: 50 tool length - max.: 400 / 465 mmtool diameter: 72 mmtool diameter with 2 vacant positions: 160 mmtool total weight: 8,00 kgsize of pallet: 630x630 mmworkpiece weight: 700 kginterference diameter: 900 mmtotal power requirement: 50,00 kWweight of the machine ca.: 26,00 tdimensions of the machine ca.: 7,00 x 4,50 x H3,50 m5-axis machining center withSIEMENS Sinumerik 840D SL control,integrated  ...

: 18 mm: M 12 : M 14 : MK 2 : 225-4.300 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel total power requirement: 0,37/0,55 kWMachine height: 840 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmControl: total power requirement: --- kWweight of the machine ca.: 6,8 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 36.0 mmbore capacity in cast iron: 45.0 mmthroat: 300 mmbore stroke: 160 mm: 4 speeds: 65 - 2000 U/mincolumn diameter: 145 mmtable-size: 615 x 460 mmfeed: 0.1 / 0.2 / 0.3 mm/Utotal power requirement: 1.75 / 2.5 kWweight: 440 kgdimensions: 1200 x 800 x 2300 mm Current list price: approx. 18.000 euros Special price available upon request Features:- Robust column drill press (V-belt drive)- Electromagnetic feed clutch = spindle feed with overload protection and electric cross-handle control- mushroom-head pushbutton (latching) for EMERGENCY STOP located on the front panel- continuously variable speed control- clockwise rotation of the drill spindle- Pole-reversible drive motor - Infinitely adjustable drilling depth stop - Work table with 2 T-slot - height-adjustable- Separate coolant system, with reservoir - Operating instructions in GermanThe data for thi ...

core drilling diameter max.: 50 - 365 mmbore depth: 24500 mmswing diameter: 1600 mmfull boring: 50 - 310 mmbed width: 1200 mmfaceplate diameter: 1300 mmworkpiece weight max.: 25 - 80 tdiameter of main spindle in front bearing: 400 mmHeight of centres: 800 mmturning speed range: 0 - 315 U/minmain drive DC: 44 kWdrill diameter: 500 mmfeeds: 0,5 - 500 mm/minworkpiece length - max.: 10.000 mmwork piece power: 74 kWturning speed range - drilling: 120-600-2400 U/minhollow spindle diameter: 460 mmturning speed range: 30-600 U/minControl: total power requirement: ca. 200 kVAweight of the machine ca.: - tdimensions of the machine ca.: - mmodernised in 2004operates using the BTA process-- 2 roller mandrels 100–650 mm- 2 roller stands 650–1200 mm- Coolant systemRange of diameters and length of drilling on one side:.D 35 – 45 mm L = 4000 mmD 46 – 65 mm L = 6000 mmD 66 – 85 mm L = 80 ...

x-travel: 800 mmy-travel: 1020 mmz-travel: 1020 mmControl: SIN840D sl B - axis: 360 x 0,001 °A - axis: -185 / +45 x 0,001 °feed x-axis: 1 - 65.000 mm/minfeed y- axis: 1 - 50.000 mm/minFeed z- axis: 1 - 80.000 mm / min.rapid traverse X/Y/Z: 60 / 50 / 80 m/minspindle turning speed - stepless: 1 - 16.000 U/minpower capacity at 100 % load: 25,00 kWpower capacity at 40 % load: 32,00 KWmax. torque at 40% / 100% load: 206 / 159 Nmspindle diameter in front bearing: 70 mmtool taper: HSK-A63 tool magazin:: 272 tool length - max.: 400 / 465 mmtool diameter: 68 mmtool diameter with 2 vacant positions: 160 mmtool total weight: 8,00 kgChip to chip time: 4,2 sec.size of pallet: 630x630 mmworkpiece weight: 700 kginterference diameter: 900 mmtotal power requirement: 50,00 kWweight of the machine ca.: 32,00 tdimensions of the machine ca.: 10,00 x 6,00 x H3,50 m5-axis machining center withSIEMENS Sinumer ...

travel -x axis: 1.630 mmtravel -y axis: 762 mmtravel -z axis: 650 mmcontrol: FANUC 0I-MD Spindle speed: 12.000 min -1weight of the machine ca.: 13 tMilling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor.The machine only has 13.686 spindle hours.The machine video from the production plant will be shared on request.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DNM750 | DNM-750The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 250 mmbore stroke: 125 mmspindle taper: MK 4 spindle turning speed range: 50 - 2500 U/min: 550 mm: 230 mmtable surface area: 820 x 240 mmconnected load frequency: 400 Vtotal power requirement: 0,8 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,2 x 1,0 x 1,85 mDrilling and milling machine- Digital display- Clockwise/counter-clockwise rotation- 2 electric speed ranges- Drilling spindle with automatic feed and manual feed- Includes machine standThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Only 250 Spindle Hours - ATC 48 Position- Optional Lehmann EA-520 R-Mi4 4e axis integrated- Optional Lehman Tailstock - Grundfos IKZ 20 Bar- Renishaw 3D Tool probe- Renishaw Length probe - Optional tooling package ca 30 units- Optional SCHUNK KONTEC KSG Machine vice (4 units)- New EUR 200.000

x-travel: 2500 mmy-travel: 920 mmz-travel: 820 mmControl: Heidenhain iTNC 530 table surface area: 3100 x 900 mmtable load: 3,0 ttool taper: HSK-A63 spindle turning speed range: 20 - 18000 U/minrapid traverse: (X,Y,Z) 100 / 60 / 60 m/minmain drive: (S1/S6) 35 / 25 kWtotal power requirement: 92 kVAweight of the machine ca.: 25,6 tdimensions of the machine ca.: 10,3 x 6,2 x 3,3 mOperating hours: 113520 hTotal spindle hours: 58190 h (date: 3rd September 2026)In April 2026, a new milling spindle from DMG-MORI was installed.Since then only 25 running hours ! 4-axes controlled CNC control HEIDENHAIN iTNC 530 Autom. swivel-type milling head (B-axis) +/- 105 deg. 120-station ATC Chip conveyor Tool measuring device (laser) Electronic handwheel Control cabinet with air conditioningMachine will be sold without clamping devices, vise, and tools.The data for this ad was created with ModulMWS - the sof ...

x-travel: 1400 mmy-travel: 700 mmz-travel: 700 mmControl: table-size: 1500 x 700 mmspindle taper:: BT 50 spindle turning speed range: 6000 U/minspindle motor: 18,5 / 15 kWrapid traverse: 24 m/mindistance table - lower edge spindle: mmworkpiece weight: 1500 kgtotal power requirement: kVATotal weight, approx.: tdimensions of the machine ca.: 6,3 x 3,3 x 4,3 mVertical BAZ , equipped with:- CNC control FANUC 0i-MF PLUS - ATC 24-fold (BT 50)- Air thru spindle - Spindle oil cooler - Oil skimmer - AICC 2 - DATA SERVER - Large tool management - Heat exchanger - Coolant thru spindle 20bar - Chip conveyor + bucketThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1.035 mmy-travel: 560 mmz-travel: 510 mmCNC-control: HEIDENHAIN TNC620 table-size: 1200 x 560 mmmax. table load: 1000 kgspindle taper: SK 40 spindle turning speed range: 10.000 U/mindrive capacity - spindle motor: 13 kWfeed stepless: 20.000 mm/minrapid traverse: 25 m/mintool change unit: 20 Pos.coolant: IKZ 20 bar voltage: 400 Vtotal power requirement: 17 kVAweight of the machine ca.: 4,1 tdimensions of the machine ca.: 2,55 x 2,30 x 2,25 mchip conveyor: 3,90 x 0,95 x 1,60 mcoolant tank: - Serial No.: 1539000377A- Machine ON: 21.689 h- Program Run: 9.021 h- CNC-Control: Heidenhain TNC620- elektronic hand wheel- chip conveyor- coolant through spindle 20 barThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: HELLER Model: MCH 250 Machine Type: Horizontal Machining Center Application Type: Milling Year: 2007 Control Unit: • Control Brand: SIEMENS • Control Model: 840D Movement: • Number of Axes: 4 • X-Axis Travel: 800 mm • Y-Axis Travel: 800 mm • Z-Axis Travel: 800 mm Technical Specifications: • Spindle Speed: 6,000 RPM • Tool Holder: BT50 • Number of Tool Positions: 100 Additional Information: • 4th-axis rotary table with 1 degree indexing • Workpiece/tool probing system (touch probe) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Control: Manufacture: FANUC 21-M x-travel: 1020 mmy-travel: 510 mmz-travel: 575 mmtable-size: 1200 x 500 mmspindle turning speed range: 60-8000 U/mintool magazin:: 24 weight of the machine ca.: 7.5 tHEIDENHAIN TNC-426Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.