mandriladoras e centros de usinagem usadas para venda (3,255)

x-travel: 500 mmy-travel: 400 mmz-travel: 330 mmtotal power requirement: kWweight of the machine ca.: 2100 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 85 mmx-travel: 400 mmy-travel: 250 mmz-travel: 140 mmw-axis: 450 mmtable surface area: 600 x 380 mmtable load: 300 kgspeeds: 30 - 2500 U/minadjustment speed: 0,02 - 0,08 mm/mintool taper: SK 30 Control: Elesta CNC 211 total power requirement: 9,2 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2750 x 1700 x 2700 mm- CNC Control Elesta 211- with misc. tool holdersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 400 mmz-travel: 375 mmtotal power requirement: kWweight of the machine ca.: 7150 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mmthroat: 350 mmbore stroke: 180 mmthread dia.: M 24 mmspindle turning speed range: 100 - 1450 U/minfeeds: 0,1 - 0,2 mm/Uspindle taper: MT 4 table surface area: 560 x 385 mmDistance spindle/table max.: 780 mmdistance spindle/base plate: 1320 mmvoltage: 400 V / 50 Hztotal power requirement: 1,5 kWweight of the machine ca.: 0,46 tdimensions of the machine ca.: 1,2 x 0,7 x 2,4 m• with cooling and thread cutting device, • adjustable bore depth with automatical switch-off,• left-/right rotation of spindle,• adjustable chip protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: SIEMENS 840D table - swivable +/-: +110 / -5 °-C-axis table rotating: 360° tool piece magazine with: 16 Werkzeugplätzen weight of the machine ca.: 3.9 tdimensions of the machine ca.: 2.9 x 2.0 x 2.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 500 mmz-travel: 300 mmControl: CNC C00 spindle turning speed - stepless: 10000 U/minspindle motor: 10 kWdistance table - lower edge spindle: 180 - 480 mmrapid traverse: 50 m/mintable surface area: 1100 x 500 mmtotal power requirement: 9,5 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2,5 x 2,4 x 2,5 m- CNC control CNC-C00- ATC 14-tools (BT 30)- Coolant through Spindleless than 5000hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 860 mmy-travel: 560 mmz-travel: 600 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Heidenhain iTNC53024-fold automatic tool changerelectronical handwheelchip conveyorcoolant through spindle deviceTechnische Daten / technical details:X-Weg / X-travel 860 mmY-Weg / Y-travel 560 mmZ-Weg / Z-travel 600 mmSpindelaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed 0-10000 UpM /rpmEilgang X,Y,Z / rapid feed X,Y,Z 24,24,20 m/minTischaufspannfläche / table clamping area 1000x560 mmWerkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebleistung Spindel 40%ED / drive capacity spindle 40%ED 18,5 kWGewicht ca. / weight 6.500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and descripti ...

bore capacity in steel (diameter): 40 mmthroat: 220 mmbore stroke: 120 mmspindle taper MT: 4 spindle turning speed range: 105 - 1257 U/minno. of turning speeds: 8 Stufen table surface area: 400 x 320 mmbase plate: 390 x 650 mmvoltage: 400 V / 50 Hztotal power requirement: 1,1 / 1,8 kWweight of the machine ca.: 0,3 trange L-W-H: 2,1 x 1,0 x 0,7 mmwith quick-action drill chuck 3-16 mm,drill chuck protection, work table can be rotated, swiveled and height-adjusted,coolant device,lighting,right/left spindle rotation,mechanical depth stop,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1050 mmy-travel: 530 mmz-travel: 630 mmControl: Heidenhain TNC 620 table surface area: 1150 x 560 mmtool taper: SK 40 spindle turning speed range: 10000 U/minfeed range: mm/minrapid traverse: 24 m/minspindle drive: kWtotal power requirement: 25 kVAweight of the machine ca.: 7,8 tdimensions of the machine ca.: 4,3 x 2,4 x 2,9 mWorking hours (date 10. February 2026):- Control on: 20811 h- Machine on: 13353 h- Programm cycle: 7412 h- Spindle hours : 5184 hEquipment:CNC control Heidenhain TNC 620Electronic handwheel HeidenhainTool measuring systemLinear scales in all axes X/Y/ZPreparation for measuring probe30-station tool changerCoolant equipment with paper band filter systemInternal coolant supply through the spindle 20 barBlown air through the spindleChip conveyorMachine documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1.135 mmy-travel: 1.050 mmz-travel: 750 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: max. 14.000 min/-1power capacity - main spindel: 19 kWmax. Torque: 100 Nmtool taper: HSK-A 63 table surface area: 1.400 x 1.050 mmmax. table load: 2.500 kgmax. workpiece sizes: 1.400 x 1.240 mmmax. workpiece height: 750 mmtool magazin:: number of toolpositions: 30 pos.tool taper: HSK-A 63 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 160 mmmax. tool length: 365 / 395 mmmax. tool weight: 8,0 kgchange-time chip to chip: 6,1 secfeeds:: feed speeds: max. 40.000 mm/minrapid traverse: 40 m/minAccelaration: 6 m/s²Feed force ( X / Y / Z ): 14 / 20 / 14 kNtotal power requirement: 44 kVAweight of the machine ca.: 14,4 tdimensions of the machine ca.: 6,0 x 5,0 x 3,3 mDocuments: Chip conveyor: Coolantsystem: high pressure coolant: 40 bar through spind ...

spindle diameter: 150 mmx-travel: 6000 mmy-travel: 2600 mmz-travel: 2300 mmw-axis: 900 mmspindle taper ISO: 50 rotary table dia.: 2000 x 3000 mmtable load capacity: 30 tspindle turning speed - stepless: 3250 U/minspindle motor: 53 / 65 kWspindle taper ISO: 50 Feeds (X,z,u,w-axis): 12 / 15 / 15 / 7,5 m/mintotal power requirement: 55 kWweight of the machine ca.: tdimensions of the machine ca.: m- CNC Control HEIDENHAIN iTNC 530- Rotary Table, Size 2000×3000 mm, 30 t- ATC 120-fold (ISO 50)- DANDREA UT5/500S Automatic Universal Indexing Head 1°×1°- Head pickup- Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1800 mmy-travel: 510 mmz-travel: 480 mmtotal power requirement: kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1.020 mmy-travel: 510 mmz-travel: 510 mmcontrol: MSC 501 Fanuctable surface area: (APC) 1.200 x 480 mmmax. table load: (APC) 550 kgMain spindle:: turning speed range - milling: 10.000 U/minpower capacity - milling spindle: 22 / 18,5 kWtool taper: BT 40 Tool-Presetter:: number of toolpositions: 30 pos.tool taper: BT 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 300 mmmax. tool weight: 8 kgrapid traverse: 32 m/minfeed: 1 ~ 16.000 mm/minTipp feed: 0 ~ 1.260 mm/minspindle bearing diameter: 85 mmtotal power requirement: 59,5 kVAweight of the machine ca.: 6,9 tdimensions of the machine ca.: 3,9 x 2,7 x 2,9 mDocuments: Chip conveyor: 2x Coolantsystem: high pressure coolant: through spindle coolant: Signal-Light: pallet changer: 2 pos. CNC - Machining Center - VerticalMORI SEIKI - SV 500 B/40- Clamping devices are NOT included in the scope  ...

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmcontrol: Heidenhain total power requirement: kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmarm length: 1230 mmtable surface area: 1200 x 500 mmbore stroke: 180 mmfeed - independent: 0,10 - 0,15 - 0,20 - 0,30 mmturning speeds: 60 - 1800 U/mintaper MK: 4 total power requirement: 2,7 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,2 x 1,8 x 2,3 mQuick radial with:- Feed- Thread cutting deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mmthroat: 300 mmbore stroke: 250 mmspindle diameter: 60 mmspindle taper: MK 5 spindle turning speed range: 18 - 1400 U/minno. of turning speeds: 12 Stufenfeeds: 0,1 - 1,6 mm/Unumber of feeds: 9 Stufentable surface area: 500 x 500 mmspindle drive: 4 kWtotal power requirement: 4,2 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 1,2 x 0,8 x 2,55 mBench drill with- Forward/reverse rotation- Thread cutting- Coolant- Emergency stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmcontrol: iTNC 530 HeidenhainNC-Swivle milling head:: turning speed range - main spindle: max. 12.000 min/-1power capacity - main spindel: 10 / 15 kWmax. Torque: 130 / 87 Nmtool taper: HSK-A 63 swivellable: NC: +30 / -120 °NC-Rotary table:: table surface area: 1.000 x 600 mmtable diameter: Ø 600 mmT-slots: 1x 14 x H7, 8x 14 H12 max. table load: 500 kgrotatable: C: 360 °tool magazin:: number of toolpositions: 2x12 (24) pos.tool taper: HSK-A 63 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool weight: 8,0 kgmax. tool length: 315 mmtotal power requirement: 45 kVAweight of the machine ca.: 6,8 tdimensions of the machine ca.: 4,5 x 4,5 x 2,5 mDocuments: Chip conveyor: Coolantsystem: turning milling head: elektr. hand wheel: Spray gun: exhaust fan: Showa CRD-1500R Operation mode 4: test probe: Heidenhain TS 64 ...

x-travel: 7000 mmy-travel: 3000 mmz-travel: 1200 mmW-axis (spindle longitudinal): 500 mmspindle diameter: 150 mmquill:: 380 x 380 mmPlate dimensions: 4x 5000 x 2000 mmpowered rotary table: 1600 x 1600 table load of rotary table max.: 10 ttravel on the bed: 1500 mmtool taper: SK 50 turning speeds: 2,5 - 1000 U/minpower capacity - milling spindle: 30 kWdimensions: mweight of the machine ca.: 62 tused manual horizontal borer with plate field- digital scale- tailstock- moveable vertical milling head- movable turn tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: - mmtravel -y axis: - mmtravel -z axis: - mmcontrol: HEIDENHAIN - iTNC 530 number of spindle speeds: 18.000 U/mintool taper: HSK-A63 5-axis simultaneous machining center | HERMLE - C 20 U equipped with ITC & pallet changer.The machine is in a well-maintained condition, works in Switzerland.The machine and can be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: C 22 | C22 | C-22 | C22U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1135 mmy-travel: 1050 mmz-travel: 710 mm0: dia 1240 x 690 mmcontrol: Heidenhain TNC 640 : : 15000 min/-1: 35 kWtool taper: SK 40 work table:: table surface area: 1050 x 860 mmmax. table load: 2000 kg: : 30 pos.tool taper: SK 40 change-time chip to chip: 6 secfeeds:: : 40 m/minfeed speeds: 40000 mm/mintotal power requirement: - kWweight of the machine ca.: 18 tdimensions of the machine ca.: 5,1 x 3,99 x 3,4 m5-Axis Machine equipped with:- CNC Control Heidenhain TNC 640- universal Milling Head (B-Axis +30/-130°)- NC- rotary Table dia 800mm (C-Axis)- BMF coolant and filtration system. - electr. HandwheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1626 mmy-travel: 1016 mmz-travel: 762 mmCNC-control: HAAS CNC Table dimensions: 1626 x 914 mmmax. table load: 1814 kgspindle taper: BT 40 spindle turning speed range: 15000 U/minspindle motor: 22,4 kWfeed range: 1270 mm/minrapid traverse: 15,2 m/mintool change unit: 30 Pos.coolant: IKZ total power requirement: kWweight of the machine ca.: 11,2 tdimensions of the machine ca.: 4,91 x 3 x 3,43 mEquipped with:- HAAS CNC control- Fixed table- Chip conveyor- IKZ- 31-position tool changer (BT 40)The machine has only 1,200 operating hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mmx-axis: 4000 mmy-axis: 2100 mmz-axis: 1500 mmw-axis: 700 mmspindle taper: BT 50 spindle turning speed range: 2500 U/minspindle drive: 22 / 26 kWtable surface area: 1600 x 2000 mmtable load: 12 tB-axis (table): 0,001 °feeds longditudinal/cross/vertical: 5000 mm/minrapid motion -longitudinal/cross/vertical: 15 / 12 / 15 m/minControl: Fanuc 0i MF total connected load: kWweight of the machine ca.: 35 tdimensions of the machine ca.: 7,5 x 6,7 x 4,5 mEquipped with:- FANUC 0i MF (10.4” LCD)- Data Server + AICC II- ATC for 60 Tools (BT 50)- X/Y/Z axis THK roller linear guide way- X/Y/Z axis Haidenhain linear scales- Coolant thru spindle 40bar- Spindle oil cooler- Hydraulic cooler- Air conditioner- Chip conveyorOperating Hours: 14761hCutting Hours: 4382hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1300 mmy-travel: 1300 mmz-travel: 1300 mmControl: Siemens 840D SL table-size: dia. 800 mmtable weight: 1500 Kgc-axis: 360 / 0,0001 °number of spindle speeds: 10000 U/min/rpmtool taper: ISO 50 spindle drive: 40 / 52 kWrapid travel x/y/z: 50 m/minTools changer: 199 pos.dimension of workpiece: 1400 x 1120 mmtotal power requirement: 42 kVAweight of the machine ca.: - tdimensions of the machine ca.: 11,9 x 6,1 x 5,2 m4-axis BAZequipped with:- CNC control Siemens 840D Solution Line- pallet changer with 4 pallets (dia. 800mm)- rotary table (B axis)- tool changer 199-fold (SK 50)- coolant system- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 400 mmz-travel: 350 mmControl: SIN840D A - axis: 360 x 0,001 °B - axis: -30 - +90 x 0,001 °workpiece diameter: 15 - 80 mmworkpiece length - max.: 800 mmtool taper: SK40 spindle turning speed - stepless: 36 - 12.000 U/minpower capacity - milling spindle: 14 / 21 kWfeed X/Y/Z/-axis: 1 - 10.000 mm/minrapid traverse X/Y/Z: 45,00 m/mintoolpiece magazine: chain magazine: 60 Stücktool length - max.: 250 mmtool diameter: 88 mmwotkpiece diameter with 2 vacant positions: 125 mmweight of tools max.: 12,00 kgtotal power requirement: 37,00 kWweight of the machine ca.: 11,00 tdimensions of the machine ca.: 6,00 x 5,00 x H3,50 m5-axis machining center with Siemens SINUMERIK840D control, IRCO RBK7212 bar feeder,chip conveyor, coolant system,coolant through the spindle (70bar). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 500 mmz-travel: 500 mmtotal power requirement: --- kWweight of the machine ca.: 9,6 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 780 mmy-travel: 560 mmz-travel: 560 mmtotal power requirement: --- kWweight of the machine ca.: 12,0 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2200 mmy-travel: 1600 mmz-travel: 1850 mmcontrol: Mazatrol Matrix Smooth G max. workpiece diameter: dia 2400 x 2000 mmmax. table load: 6000 kgsize of pallet: 1250 x 1250 mmB - Axis: 0,0001 °turning speeds: 10000 U/mindrive capacity - spindle motor: 37/30 kWmax. torque on the spindle: 350 Nmno. of tools in magazin: 120 tool adaptor: BT 50 Rapid Travel X / Y / Z-Achse: 43 m/mindimensions of the machine ca.: 11 x 7,1 x 4,5 mdistance spindle /table: 100 - 1700 mmtotal power requirement: 120 kVAweight of the machine ca.: 57,5 tequipped with:- CNC control Mazatrol Smooth G- B-axis (0.0001°)- ATC 80-fold (BT 50)- Chip Conveyor- 2-fold Pallet Changer- High Pressure cooling through Unit- Chip Conveyor- Renishaw Laser Tool Measur.- Thread Cutting Function-Power-On Time: , Automatic Cutting: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: - mmx-travel: 1600 mmy-travel: - mmtotal power requirement: - kWweight of the machine ca.: 13,7 tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

taper MK: 2 : ja weight of the machine ca.: 200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.