mandriladoras e centros de usinagem usadas para venda (3,308)

Machine number: 6016Speed range: 320 to 1600 rpmTable dimensions: approx. 290 x 220 mm (clamping surface of the table)

bore capacity in steel (diameter):55 mmarm length:1600 mmtotal power requirement:4 kWweight of the machine ca.:5,5 tdimensions of the machine ca.:2800 x 980 x 3000 mm

arm length:1600 mmweight of the machine ca.:5,5 tdimensions of the machine ca.:2800 x 980 x 3000 mm

Machine number: 1441Spindle speeds: 200 - 3000 rpmTable dimensions: 250 x 240 mmEquipment: With 2 grooves, incl. frequency converter for infinitely variable speed useReference: Showrrom - Project Rühl

Serial number: 508219Table dimensions: approx. 330 x 260 mm

Drilling capacity diameter: 25.0/30.00mm , Throat depth: 260mm, Drilling stroke: 120mm, Spindle rotation rate: 80-1400 min-1

equipped with automatic cooling system; unused; in suitcase; 5637

Dimensions 470x360x180 mm

Deep Hole Milling Machine TBFZ 1600 CNC Year of Make: 2003 Technical data Travels X-axis travel: 1600 mm Y-axis travel: 1200 mm Z-axis travel: 500 mm W-axis travel: 1200 mm B-axis travel: 360° (turntable) Table Table size (L x W): 1500 x 1500 mm Slots (T-slot): 5 x DIN 650-22 H12, 150 mm spacing Facilities Tool clamping: hydraulic Electrical connection: 400 V, 50 Hz Compressed air connection: nominal flow rate 7000 rpm, operating pressure: 6 bar Botek Driller optionally available Feed Feed Drive: Brushless AC Servo Motors Feed speed: 0 - 20,000 mm/min Rapid traverse: X-axis: 20,000 mm/min Y- and Z-axis: 20,000 mm/min Operating modes Manual mode: 20,000 mm/min Set-up mode: 0 - 2,000 mm/min

Column drill with: Tapping function. Digital depth display Coolant system 2 Stage Motor Spindle protection Swivel table Swivel drill head LED lighting Packaging Dimensions: 730 x 760 x 188mm Weight 340Kg Drilling capacity in steel 40 mm Projection 300 mm Drilling stroke 120 mm Spindle mount MK 4 MK Table: 500 x 460 mm Column diameter 115 mm Speed 75- 3200 rpm Feeds 0.1 - 0.18 - 0.26 mm/rev Total power requirement 1.5 kW Machine weight approx. 350 kg Dimensions L-W-H 2.2 x 0.8 x 0.7 mm Condition: never used / new (5)

Operating voltage: 400 VFrequency: 50 HzRated current: 5.6 ADrilling depth: up to 140 mmwith swivel tableTable dimensions: 440 x 440 mmwith a clamping system, jaw width: 140 mmReference: Hercegfi - Lot 106

Machine number: 00122457Speed: from 240 to 3800 rpmTable dimensions: 300 x 230 mmwith vise attached, jaw width: 100 mm

Precise, smooth-running standard drilling machine in a modern design. Many options included. - Emergency stop push button - Full engine protection - Distance spindle / base plate 529 mm - T-slot width 10 mm Drilling capacity in steel 14 /15 mm Projection 180 mm Drilling stroke 70 mm Speed 420 - 2100 rpm Table 250 x 220 mm Distance between drill head and clamping surface max. 380 mm Total power requirement 0.5/1.0 / 400 kW / volt Column diameter 65 mm Tool holder MK 2 Machine weight approx. 0.08 t Dimensions L x W x H 0.4 x 0.5 x 0.9 m Condition: never used / new (5)

Offered is a CNC horizontal milling machine. Working area X/Y/Z: 1000mm/800mm/850mm, pallet size: 630x630mm, table load: 1300kg, B-axis indexing: 0.001°, spindle speed: 6000rpm, spindle power: 30kW, spindle torque: 600Nm, tool holder: SK50, magazine positions: 120, spindle internal cooling pressure: 70bar, pump capacity LD: 150l/min at 3bar, pump capacity MD: 40l/min at 7bar, pump capacity HD: 32l/min at 70bar, cooling capacity cooling unit: 11.8kW, control: FANUC 31iMA. Equipped with additional pallets with threaded grid (24xM16 in 125mm grid), direct absolute scales, spindle internal cooling system, automatic scraper belt chip conveyor with 1000l dirty water fine filtration, recirculating chiller, washing shower, mist extraction system, touch probe. Weight: approx. 18500kg, overall dimensions X/Y/Z: approx. 6800mm/4200mm/3400mm. Inspection possible by arrangement.

Offered is a CNC horizontal machining center. Working area X/Y/Z: 750mm/750mm/850mm, pallet size: 550mm/550mm (2-position changer), spindle speed: 15000rpm, tool holder: SK50, tool magazine: 60 positions (chain type), B-axis: 0.001°, max. loading weight: 800kg, rapid traverse: 60m/min, power-on hours: 64148h, feed time: 21867h, control: Fanuc 31i. Equipped with 2-position pallet changer, coolant filtration system (central system designed for up to 3 machines), cooling unit, oil mist extraction system, tool package (15x drill chucks, 8x collet chucks, 13x face clamping holders), linear measuring system X/Y/Z, weight: approx. 12500kg, overall dimensions X/Y/Z: approx. 5500mm/3500mm/3200mm. Inspection possible by arrangement.

Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible.

Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining center Mikron VC500D -for: max. 16 recordings -Recording: SK40 -Individual components: see photos -Transport dimensions: Ø 780 x 540 mm -Weight: 56 kg

Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel paths: Z 330 mm/Y 410 mm/X 630 mm -Quick stroke: 155 mm -Recording: MK4 -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg

380 V 16 A Montagem do coletor, a porca está em falta. Comprimento 40 cm Largura 30 cm Altura 50 cm Cor: Cinzento

380 V 16 A Porta-coletores d 6 Comprimento 70 cm Largura 30 cm Altura 60 cm Cor: Verde

A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement.

A column drilling machine is offered. Drilling capacity: 32mm, spindle holder: MK3, table clamping surface X/Y: approx. 450mm/350mm, speed range: 100rpm - 1600rpm, control system: manual. Equipped with quick-action drill chuck, height-adjustable drilling table, foot switch. Weight: approx. 480kg, overall dimensions X/Y/Z: approx. 600mm/800mm/1850mm. Inspection possible by arrangement.

A column drilling machine is offered. Drilling capacity: 40mm, spindle holder: MK4, table clamping surface X/Y: approx. 550mm/450mm, speed range: 25rpm - 3000rpm, control system: manual. Equipped with machine vise, height-adjustable drilling table, coolant system. Weight: approx. 850kg, overall dimensions X/Y/Z: approx. 1000mm/700mm/2100mm. Inspection possible by arrangement.

A gang drilling machine is offered. Number of spindles: 3, drilling capacity: 8mm, spindle holder: B12/MK1, table clamping surface X/Y: approx. 1050mm/300mm, speed range: 450rpm - 4500rpm, control system: manual. Equipped with quick-action drill chucks, solid cast iron base, emergency stop switch. Weight: approx. 480kg, overall dimensions X/Y/Z: approx. 1200mm/850mm/1700mm. Inspection possible by arrangement.

Excelente estado - Totalmente operacional - Carregamento / Transporte possível! Mesa de trabalho 2 peças, incluindo parede divisória Largura da ranhura 14 mm Altura da mesa acima do chão 950 mm Revista de ferramentas 20 lugares Ferramenta máxima - Ø 120 mm comprimento máximo da ferramenta 250 mm

Excelente estado - Totalmente operacional - Carregamento / Transporte possível! Diâmetro de perfuração 4 - 60 mm garganta 1.250 mm Altura máxima da peça de trabalho 500 mm Fuso afunilado MK5 Área de superfície da base 2000x980 mm Alcance de fixação da mesa 640x500 mm Gama de Velocidade de Viragem 25 - 2000 rpm necessidade total de potência 6,5 kW

Key data: 800 mm, 500 mm, 610 mm

JOHNFORD VMC-850 Centro de maquinação vertical GERAL Projeto nº: 906006 Quantidade: 1 peça. Fabricante: JOHNFORD Tipo: VMC-850 Controlo: Fanuc 0 M Ano de Fabricação: 1999 Condição: Máquina usada Máquina de Camadas Aprox. (Hrs): 1-2 Camadas DESCRIÇÃO MOAGEM Curso em X 800 mm Curso em Y 500 mm Viagem em Z 610 mm Velocidade máxima de travessia rápida em X/Y/Z 30/30/20 m/min Suporte para ferramentas BT 40 Fuso de fresagem máxima de velocidade 8000 1/min Diâmetro do eixo no rolamento dianteiro 65 mm Revista Disc tool, 24 estações Diâmetro máximo da ferramenta 100 mm Comprimento máximo da ferramenta 200 mm Peso máximo da ferramenta 10 kg Peso máximo da peça de trabalho 400 kg Tamanho da mesa 1000x500 mm OUTROS EQUIPAMENTOS Revestimento de proteção contra salpicos com área de trabalho totalmente encapsulada Iluminação na  ...

A CNC vertical machining center Sigma is available. Travel X/Y/Z: 850mm/480mm/580mm, table dimensions X/Y: 1000mm/540mm, max. table load: 7000kg, tool positions: 40, tool holder: SK40, speed: 12000rpm, power: 15kW, torque: 15kW. Machine dimensions X/Y/Z: approx. 3900mm/2200mm/2850mm, weight: approx. 6500kg, control: Heidenhain TNC 426M, operating hours: approx. 15855h. Including chip conveyor and internal coolant supply. Documentation available. An on-site inspection is possible.

A horizontal CNC machining center Makino is available. Travel path X/Y/Z: 560mm/560mm/600mm, pallet dimensions X/Y: 400mm/400mm, max. workpiece weight: 500kg, indexing: 0.001°, rapid traverse: 84m/min, feed rate: 50m/min. Machine dimensions X/Y/Z: approx. 4650mm/1950mm/2850mm, weight: approx. 8600kg, control system: Fanuc System 16iM/Makino Professional 3. Documentation available. An on-site inspection is possible.