tornos usadas para venda (3,073)

turning diameter: 350 mmturning length: 200 till 1040 mmcontrol: OSP-P200L total power requirement: kWweight of the machine ca.: 11000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1320 mmturning diameter over slide: 950 mmturning length: 7000 mmworkpiece weight: 14000 kgspindle turning speed range: 1,4 - 315 U/minfeeds: 0,125 - 48 mm/minmain drive DC: 45 kWspindle bearing diameter: 260 mmmax.workpiece weight:each extra steadyrest: 5000 / 7000 kgtotal power requirement: 65 kVAweight of the machine ca.: 19,5 tdimensions of the machine ca.: ca 10 x 2,5 mP-Seriess(Precise), overhault/modernized in 2014equipped with:- Faceplate- Digital display Newall DP 700- 2 bezels- Motorized tailstockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 820 mmturning length: 2000 mmcontrol: Siemens 840 D z-travel: Z1=1980 Z2=2290 mmx-travel: X1=500 X2=500 mmworkpiece weight: 1600 kgspindle nose: A15 main spindle bore: 160 mmfeeds x-axis: 0,1-18.000 mm/minrapid traverse X-axis: 18 m/minfeeds z-axis: 0,1-24.000 mm/minrapid traverse Z-axis: 30 m/minturret I: 16 Wkzg.turret II: 16 Wkzg.tool taper: Capto C6 voltage: 400 Vmain spindle speeds:: 1-2.500 U/mintotal power requirement: 180 KVAweight of the machine ca.: 36 tdimensions of the machine ca.: 9,7x2,5x4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SpecificationsLC 300ALC 340A Max. turning diameter above the bed300 mm340 mm Max. workpiece length500 / 750 / 1000 mm500 / 750 / 1000 mm Max. turning diameter above carriage170 mm210 mm Max. turning diameter above broken bed430 mm470 mm Effective width of the broken bed for circular table137 mm137 mm Spindle Bore Diameter38mm38mm Spindle bore taper (Morse)55 Spindle nose, code no.C5, D5, C5, D5 Distance from Tool Mounting Socket to Spindle Shaft18 mm18 mm Tool Area Size16 x 16 mm16 x 16 mm Tailstock (Morse) Cannon Cone3 3 Spindle Speed Range60 - 2000 RPM60 - 2000 RPM Number of spindle speed ranges99 Longitudinal feed range0.03 - 0.43 mm/rpm0.03 - 0.43 mm/rpm Cross feed range0.015 - 0.21 mm0.015 - 0.21 mm Metric threads0.25 - 9 mm0.25 - 9 mm Threads per inch72 - 4 3/4 threads/inch72 - 4 3/4 threads/inch Threads with modulus0.25 - 3.50.25 - 3.5 Diametral pitch (DP)8 - 1448 - 144 Auction- ...

\"X\" axis travel: 220 mm \"Z\" axis travel: 410 mm Turning diameter above the transverse carriage:350 mm Spindle motor power: 15 kW Feather line: 500 mm Spindle bore: 51 mm Spindle nose: 6 Max. spindle speed: 4000 rpm Min. Spindle Speed: 25 rpm\" Auction-ID: A7-50976-3

\"GENERALI Supply voltage 380V 3 - ‡ 5% 50 Hz Installed power kW15 Hydraulic working pressure bar 70 C.N.C. 8 simultaneous axes (Expandable up to 16) Display Color Operating temperature +5 / +40 degrees Vector Motorization Axis position detection By optical scale Refrigeration flow rate lt/m 50 Tank capacity 150 lt MAX. BAR DIMENSIONS Round, diameter 60 mm Hexagon, key mm 52 Square, side 42 mm MAX. THREAD DIAMETER Taps and dies aluminium brass M 42 Taps and dies mild steel M 30 Snap-on die or rolling head According to die capabilities Finger thread mm 60 DIMENSIONS AND WEIGHTS Occupied area mm 2620x1300 Height 2450 mm Net weight (approx.) kg 2800 Packaging dimensions mm 2800x1500x2500 Box volume 7.5 m³ SPINDLE Motor power (Vector) KW 12 Speed range rpm 25-3000 Transmission motor coupling A by means of toothed belt TURRET SLIDE Rapid speed mm/1' 10000 Maximum turret carriage stroke mm  ...

Maximum bar diameter 75 mm Maximum spindle speed Rpm 3000 Vector motor power Kw 12 Maximum torque Nm 230 Maximum turret stroke 180 mm Maximum distance between turret and clampmm 290 Minimum distance between turret and gripper mm 110 Tool holes Nr 6 Diam. Of turret holes mm 31.75 Rapid slide speed m/min 10 Maximum thrust force daN 1200 Gearbox speed (indexing) sec 0.3'' Tool detachment mm 0.2 Slide X1,X2, X3,X4 nr 4 Maximum stroke 70 mm Quick speed m/min 10 Maximum force daN 1200 Slide Z2 Nr 1 Maximum stroke Z2 mm 120 Rapid speed Z2 m/min 10 Maximum force Z2 daN 1200 Hydraulics with C.N.C. management Max bar 35 Pliers system in use Din 6343 C.N.C. numerical control Axes 8 Installed power Kw 18 Working pressure Bar 70 Refrigeration flow rate Lt/m 50 Tank capacity Lt 200\" Auction-ID: A7-50976-1

Auction-ID: A7-50976-2

turning diameter: 600 mmturning length: 1200-1280 mmcontrol: Fanuc 210 : 400 mm spindle bore: 90 mm: 3000 U/min spindle drive motor: 18-36,5 kWx-travel: 320 mmz-travel: 1250 mm: 8 Stationen tail stock: MK5 tool taper: VDI 40 machine weight ab.: 5000- 5500 kgweight of the machine ca.: 3000 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 7100 mmswing diameter: 8000 mmturning height: 4700 mmdistance between table and cross rail: 5495 mmworkpiece weight: 150 tfaceplate turning speed range: 0,3 - 19 U/minmain drive motor: 125 kWcross travel: 4400 mmswivel range of slides - vertical: +30 / -15 °Control: FANUC 18i-T total power requirement: ca. 155 kWweight of the machine ca.: 291 tdimensions of the machine ca.: 8,6 x 17,6 x 8,3 m- CNC Control Fanuc 18i-T--2-Axis simultanous (X- & Z)- Z-Axe with hydraulic balance- Digital Scale in X and Z Axis- 2 rams on crossrailThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 240 mmturning length: 470 mmcontrol: 840 D sl Operate 4.8 Celosgreates pass round over bed: 500 mmswing diameter over slide rest: 290 mmcentre distance: 780 mmMain spindle:: turning speed range - main spindle: max. 6.000 min/-1power capacity - main spindel: 13 / 14 kWmax. Torque: 171,5 / 192 Nminner draw tube diameter: 52 mmC-Axis: 0,001 °spindle diameter in front bearing: 100 mmspindle nose: FL 140H5 Subspindle:: Spindle speed range subspindle: max. 6.000 min/-1power capacity - Sub spindle: 12,6 / 16,2 kWmax. Torque: 48 / 62 Nminner draw tube diameter: 37 mmC-Axis: 0,001 °spindle diameter in front bearing: 90 mmspindle nose: FL 140H5 turret:: number of toolpositions: 12 pos.Number of driven toolspositions: 12 pos.tool taper: VDI 30 Spindle speed - driven tool stations: max. 5.000 min -1power capacity - driven tool-stations: 4,18 kWmax. Torque: 16 / 20 Nmy-axi ...

turning diameter: 820 mmturning length: 3000 mmcontrol: Siemens 840 D workpiece weight: 2,5 tdrive of main spindle: 77 kWspindle nose: A15 spindle bore: 160 mmWorkpiece head (C-axis): 0,005 gradmax. torque on the working spindle: 2500 Nmmain spindle speeds:: 0-2.430 U/minfeeds z-axis: 0,1-18.000 mm/minrapid traverse Z-axis: 18 m/minfeeds x-axis: 0,1-30.000 mm/minrapid traverse X-axis: 30 m/minsteady: 50-350 Spannbereichtailstock - quill dia: 180 mmtailstock - travel of quill: 170 mmy-axis: -100/+150 mmrapid traverse y-axis: 12.000 mm/minb-axis: -105/+95 Gradmilling spindle - taper: HSK100 milling spindle motor: 43 kWmilling head speed: 1-5.500 U/minmax. torque on the milling spindle: 336 Nmtool changer: 96 Plätzeweight of tools max.: 15 kgchip conveyor: kWtotal power requirement: 166 KVAweight of the machine ca.: 40 tdimensions of the machine ca.: 112x4,4x3,85 mThe data for this ad wa ...

USED HARDINGE CONQUEST 42 CNC latheBar diameter: 42 mmDiameter above the bed: 269 mmDiameter above the carriage: 180 mmDistance between tip: 350 mm1 Main spindle with Caxis Spindle speed: 50 to 5000 RPMStroke: X 135 mm - Z 353 mm1 Turret / 12 stationsEquipped with1 FANUC O-TC CN1 Programmablecounter point 1 Chipconveyor 1 LNS 6/42 hydraulic tubeMachine dimensions and weight: 3200x1500xH1600mm - weight 3200kg - LNS6/42: 4800x800xH1400mm - weight 700kg Auction-ID: A1-50950-23

Used NAKAMURA Super NTJ CNC LatheYear: 2011Main spindleBar diameter: 65 mmMax turning diameter: 190 mmSpindle nose: A2-6Spindle power: 15 kWSpindle speed: 4,500 rpmC-axis indexing: 0.001° Counter-spindleBar diameter: 51 mmSpindle nose: A2-5Spindle power: 11 kWSpindle speed: 5,000 rpmC-axis indexing: 0.001°Stroke: 760 mmUpper leftturret Number of positions: 24Number of motorized positions: 24Axis travel: X=345 mm - Y=+/- 45 mm - Z=1240 mmRotating tool speed: 6,000 rpmRotating tool power: 5.5 kWB-axis travel: +/- 91°Indexing accuracy: 0.001°Lower right turretNumber of positions: 24Number of motorized positions: 12Axis travel: X=167.5 mm - Z=685 mmRotating tool speed: 6,000 rpmRotating tool power: 5.5 kWEquipped with1 FANUC 18i-TBCNC 1 Collet chuck on the mainspindle 1 Ø160mm chuck on the sub-spindle1 Set of fixed and rotatingtool holders 1 Toolprobe 1 Workpieceretriever 1 Chipconvey ...

USED KITAMURA KNC 250YS CNC LatheMain SpindleBar Diameter: 42 mmSpindle Nose Type: A2-5Spindle Power: 7.5 kWSpindle Speed: 100 - 5000 RPMC-Axis Indexing: 0.001°Counter SpindleSpindle Power: 3.7 kWSpindle Speed: 100 - 5000 RPMC-Axis Indexing: 0.001°Turret1 Turret / 12 Stations with Rotating ToolsAxis strokes: X = 160 - Y = 70 - Z = 260 mmEquipped with1 FANUC 18i-TCNC 1 Partsrecuperator 1 Chipconveyor 1 Set of fixed and rotatingtool holders 1 IEMCA BOSS 542 bar feederMachine dimensions and weight: 3800x2000xH1800mm - weight 4000kg + 1 pallet 200kg Auction-ID: A1-50950-34

turning diameter over bed: 280 mmturning dia. over face-slide: 150 mmcentre height: 140 mmturning length: 500 mmmain drive stepless adjustable: 0 - 6.000 U/minspindle speed: 30 - 5.000 U/minmax. workpiece weight between centers: 100 kgquill stroke: 85 mmtotal power requirement: 4 kWweight of the machine ca.: 800 kgdimensions of the machine ca.: 1430 x 950 x 1550 mmBed Slide (Z-Axis): - Guide length of the bed slide: 350 mm - Bed width: 205 mm - Slide travel: 500 mm - Max. feed force: 3500 NFlat slide (X-axis): - Slide travel: 150 mm - Slide width: 140 mm - Max. feed force: 2500 N Upper slide (Z-axis):- Slide travel: 100 mm - Slide width: 9 ...

turning diameter: 246 mmturning length: 445 mmcontrol: Siemens 840D spindle speed: 6.000 U/minrapid traverse Z-axis: 30 m/minrapid traverse X-axis: 24 m/mintailstock travel: 450 mmmax. weight between the centers: 110 kgtotal power requirement: 24 kVAweight of the machine ca.: 3,95 tdimensions of the machine ca.: 3,05 x 1,65 x 1,75 mCTX 310: - Powered tools with C-axis - TailstockWorking area: - Machine bed length: 1,625 mm - Center height: 365 mmTailstock: - Max. tailstock force: 400 daNTool holders: - Number of tools: 12 - Tool holder: VDI 30The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USED HARDINGE GT-CE CNC LATHE SerialNo.: GT-753-BMainspindle Bar diameter: 27 mmDiameter above bed: 300 mmSpindle nose: A2-4Spindle power: 3.7 kWSpindle speed: 60-6000 rpmAxle travel: X=281 mm - Z=304 mmEquipped with1 FANUC 18-T CNCDimensions and weight1800x1500xH1800mm - weight 2500kg Auction-ID: A1-50950-24

USED CORTINI T 120 C CNC LATHESerial No.: T120019Year: 19981 Main spindle with C-axisBar diameter: 28 mm1 8-station turret with rotating toolsEquipped with1 FANUC 21i-TCNC 1 Programmabletailstock 1 LNS HYDROBAR hydraulic tubeDimensions and weightMachine: : 2400x1400xH1600mm - weight 2500 kg - LNS tube: 4700x800xH1200mm - weight 450kg Auction-ID: A1-50950-10

USED BIGLIA B445 S2M CNC LatheSerial No.: 8272Year: 2005Mainspindle Max bar diameter: 45 mmMax turning diameter: 240 mmMax turning length: 320 mmSpindle nose: ASA5Spindle speed: 5000 rpmSub-spindleSpindle nose: ASA5Spindle speed: 5000 rpmUpper turretNumber of positions: 12Number of motorized positions: 12Axis travel: X: 170 mm - Z: 400 mmLower turretNumber of positions: 12Number of motorized positions: 12Axis travel: X: 170 mm - Z: 400 mmEquipped with1 FANUC 18i-TBCNC 1 Parts reclaimer 1 ChipconveyorDimensions and weightMachine:4800x2000xH2000mm / weight: 5000 kg Auction-ID: A1-50950-3

USED NAKAMURA SUPER NTM3 CNC latheSerial No.: L152501Year: 2011Mainspindle Bar diameter: 65 mmMax turning diameter: 190 mmSpindle speed: 4500 rpmSpindle power: 15 kWC-axis: 0.001° indexing increment SpindleSpindle nose: A2-6Spindle speed: 5000 rpmC-axis: 0.001° indexing increment Left upper turretNumber of positions: 24Number of motorized positions: 12Axis travel: X=167.5mm - Y=102 mm Z=250 mmUpper rightturret Number of positions: 24Number of motorized positions: 12Axis travel: X=167.5mm - Y=102 mm Z=250 mmLower right turretNumber of positions: 24Number of motorized positions: 12Axis travel: X=167,5mm - Z=685 mmEquipped with1 FANUC 16i-TBNC 2 HPpumps 1 Set of fixed and rotatingtool holders 1 CNCparts collector 1 Chip conveyorDimensions and weight6000x2400xH2300mm - weight 12,000 kg Auction-ID: A1-50950-58

USED TORNOS ENC 16 CNC latheSerial No.: 58145Year: 1990Equipped with1 SIEMENS SINUMERIKCN Rotatingtools 1 TORNOS bar feederMachine dimensions and weight: 2300x1200xH1600mm - weight 2500kg - bar feeder: 5000x700xH1300mm - weight 800kg Auction-ID: A1-50950-76

USED NAKAMURA SC300L CNC LATHESerial No.: L301603Working hours: 4524 hoursMainspindle Bar diameter: 71 mmTurning diameter: 350 mmMax turning length: 1100 mmSpindle speed: 6000 rpmC-axis: 360° indexing increment 0.001° Counter-spindleSpindle speed: 6000 rpmC-axis: 360° indexing increment 0.001° TurretNumber of positions: 12Number of motorized positions: 12Axis travel: X=222 mm - Z=1135 mm - Y=+/- 45 mmEquipped with1 FANUC 18i-TBCNC 1 HAINBUCH 2701/0011 clamping clamping on the mainspindle 1 HFKN 165/46 chuck clamping on the sub-spindle1 Set of fixed and rotatingtool holders 1 Workpiecerecuperator 1 Chip conveyorDimensions and weightMachine: 4650x2200xH2250mm - conveyor: 5300x1500mm - 2 pallets - total weight 5400 kg Auction-ID: A1-50950-56

USED CITIZEN M16V CNC LATHEYear: 2007Bar diameter: 16 mmMax. turning length: 320 mmSpindle power: 3.7 / 5.5 kWSpindle speed: 10,000 rpmTurret: 20 stations with Y-axisEquipped with1 Mitsubishi MeldasCN 1 Lubricationpump tray 1 Firesuppression system 1 HP COOL BLASTER CB510pump unit 1 Chipconveyor 1 IEMCA BOSS 332E/R 44LL bar feeder (4 meter bars)Dimensions and weightMachine: 4000x2000xH1800mm - weight 3500 kg - Bar feeder: 5000x800xH1400mm - weight 800kg + 1 pallet 600x600 weight 200 kg + 1 pallet 1200x1200mm weight 250kg Auction-ID: A1-50950-8

USED CNC LATHE INDEX 170 MSerial No.: 24932Spindle bore: 42 mmMax. diameter above the bed: 370 mmDistance between tips: 450 mmLongitudinal stroke of the carriage: 150 mmStroke of the cross carriage: 400 mmSpindle speed: 4000 rpmNumber of positions on the turret: 14 rotating toolsEquipped with1 FANUC series 21i-T CNCclamping on the main spindle1 Set of fixed and rotatingtool holders 1 LNS HYDROBAR hydraulic tubeMachine dimensions and weight: 3800x2200xH1800mm - weight4500kg - LNS tube: 4800x800xH1300mm - weight 500 kg Auction-ID: A1-50950-33

USED FAMAR ERGO 250 CNC latheSerial No.: 20.68Year: 2001Machinablepart Diameter: 200mmMax. length on turret: 125 mmMax. tool block length: 200 mmAxlesAxis strokes: X: 340 - Z: 215 mmFast feeds: X: 60 - Z: 30 m/minBall screw diameter: 40 mmSpindleSpindle nose: 6\" Spindle power S6: 30 kWSpeed: 6000 rpmMax centering diameter: 350 mmEquipped with1 CN SIEMENS SINUMERIK1 Chip conveyorDimensions and weightMachine: 2460x1950xH2680mm - conveyor: 4000x1400mm - Total weight: 7000 kg + 7 pallets Auction-ID: A1-50950-13

USED BIGLIA B470 YSM CNC latheSerial No.: 9957Year: 2007Mainspindle Bar diameter: 68 mmMax. turning diameter: 200 mmMax. turning length: 300 mmSpindle speed: 100-4000 rpmSpindle bore: 80 mmspindle nose: ASA 6''C-axis: 360° indexing increment 0.001°Sub-spindleMaximum bar diameter: 42 mmMax turning diameter: 160 mmMax turning length: 200 mmSpindle speed: 100-4000 rpmSpindle bore: 56 mmspindle nose: ASA 5''C-axis: 360° indexing increment 0.001° Upper turretNumber of positions: 12Number of motorized positions: 12Axis travel: X: 165 mm - Y: +60/-40 mm - Z: 380 mmLower turretNumber of positions: 12Number of motorized positions: 12Axis travel: X: 147 mm - Z: 240 mmEquipped with1 FANUC 18i-TCNC 1 Partscollection belt 1 Toolmeasuring arm 1 Set of fixed and rotatingtool holders 1 Chip conveyorDimensions and weightMachine:5000x2200xH2000mm - Total weight: 6150 kg Auction-ID: A1-50950-5

USED BIGLIA B445 S2M CNC LATHE SerialNo.: 6922Year: 2001Mainspindle Max. bar diameter: 45 mmMax. turning diameter: 240 mmMax. turning length: 320 mmSpindle nose: ASA5Spindle speed: 5000 rpmSub-spindleSpindle nose: ASA5Spindle speed: 5000 rpmUpper turretNumber of positions: 12Number of motorized positions: 12Axis travel: X: 170 mm - Z: 400 mmLower turretNumber of positions: 12Number of motorized positions: 12Axis travel: X: 170 mm - Z: 400 mmEquipped with1 FANUCNC 1 Clamping on the main spindle and on the sub-spindle1 Workpiecerecuperator 1 Chip conveyor1 IEMCA BOSS 545E bar feederDimensions and weightMachine: 4800x2000xH2000mm - Bar feeder: 4000x800xH1300mm - Total weight: 5800 kg Auction-ID: A1-50950-2

USED MORI SEIKI NZ2000 T2Y CNC LATHEYear: 2010Number of cutting hours: approx. 19,500 hoursMain spindleBar diameter: 65 mmMax. turning diameter: 310 mmMax. turning length: 810 mmSpindle nose: JIS A2-6Spindle bore: 73 mmSpindle power: 25/22 kWSpindle speed: 5000 rpmC-axis: 360° Indexing Increment 0.001°Counter SpindleBar Diameter: 65 mmSpindle Nose: JIS A2-6Spindle Bore: 73 mmSpindle Speed: 5000 RPMC-Axis: 360° Indexing Increment 0.001° UpperTurret Number of Positions: 16Number of Motorized Positions: 16Axis Travel: X=210 mm - Y=110 mm - Z=300 mmLower TurretNumber of Positions: 16Number of motorized positions: 16Axis stroke: X=210 mm - Y=110 mm - Z=810 mmEquipped with1 CN MORI SEIKI MSX 701 IV1 Clamping in collet on both spindles1 Toolmeasuring arm 1 Workpieceretrieval arm 27 Fixedtool holders 1 Rotatingtool holder 1 Chipconveyor 1 IEMCA MASTER 880 MP bar feederDimensions and weight ...

USED CAZENEUVE HBX 360 MECHANICAL LATHEDistance Between Tip: 750 mmHeight Between Tip: 180 mm∅ Spindle Passage: 42 mm∅ Above Bed: 400 mm∅ Above Slide: 200 mmBed Width: 330 mmCross Slide Travel: 180 mm∅ Duct Width: 60 mmSleeve Travel 140 mmSpindle Cone: CM5Tailstock Cone: CM4Spindle Power: 5.2 kWSpindle Speed: 50 to 3000 RPMEquipped with1 Heidenhain 2-axis MultifixTurret 1 Heidenhain3-jaw chuck ∅ 200 mm1 Tailstockchuck 1 Capstan counterpoint Auction-ID: A1-50950-85