fresadoras usadas para venda (2,490)

grinding diameter: mmgrinding length: mmmax. module: 0min. module: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4300 mmy-travel: 1000 mmz-travel: 1700 mmControl: TNC430 : : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 620 mmy-travel: 420 mmz-travel: 400 mmControl: Heidenhain TNC 124 turning speed range - spindle: 50 - 4.000 U/mintransmission ratio: 2 drive capacity - spindle motor: 6 kWtension force: 10 kNswivellable: manuell +/-45 °max. tool diameter: 125 mmmax. tool weight: 6 kgtable surface area: 400 x 800 mmT-slots: 5x14x80 max. table load: 400 kgfeed speeds: X/Y: 0 - 6.000 mm/minfeed speeds: Z: 0 - 4.000 mm/minrapid traverse: X/Y: 6 m/minrapid traverse: Z: 4 m/mintotal power requirement: 11 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,9 x 3,5 x 2,0 mIncludes:Heidenhain TNC124 point-to-point controlElectrical documentation availableCoolant system2 work lightsMachine viseVarious tool holdersVarious SK40 toolsEnclosure with 2 sliding doors available, pictures to followThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 300 mmz-travel: 400 mmCNC-control: DIALOG 11 spindle taper ISO: 40 spindle turning speed range: 31 - 5.000 U/mintable-size: 620 x 390 mmtable load: 250 kgpower capacity: 5,5 kWfeeds -stepless-: 2 - 6.000 mm/minquill stroke: 80 mmcoolant: voltage: 380 Vtotal power requirement: 11,0 kVAweight of the machine ca.: 1,65 tdimensions of the machine ca.: 1,85 x 1,90 x 1,80 melectric cabinet: 1,35 x 0,70 x 1,70 m- Serial-No.: 2836-0175- control: DIALOG 11- electrical hand wheel- horizontal milling spindle- coolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 600 mm: 500 mm: 400 mm: 1000x500 mm: 1200x250 mm: 40-3200 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 600 mm: 500 mm: 400 mm: 1000x500 mm: 1200x250 mm: 40-3200 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm: 220 mm: 380 mm: 840x390 mm: 950x250 mm: 65-2600 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mmy-travel: 300 mmz-travel: 450 mmtable-size: 1100 x 250 mmcontrol: konventionell tool adaptor: SK40 turning speed range: 35,5 - 1800 U/minquill stroke: mmtotal power requirement: 5,0 kWweight of the machine ca.: 1,25 tdimensions: 1,8 x 1,7 x 1,8 mFeatures:- Heidenhain digital readout- Infinitely variable feed and spindle speed- Coolant system- Chip guard- Hydraulic vise- Good condition- SK40 tool holders and accessories (see pictures)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: mmy-travel: mmz-travel: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: mmy-travel: mmz-travel: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mmy-travel: 250 mmz-travel: 400 mmtable-size: 1200 x 300 mmcontrol: konventionell tool adaptor: SK40 turning speed range: 50 - 2500 U/minquill stroke: mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,7 tdimensions: 2,1 x 2,0 x 1,6 mFeatures:- Digital display- Coolant system- Huron milling head- Emergency stop device- DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 5060 mmy-axis: 3200 mmz-axis: 1000 mmdistance between columns: 2700 mmspindle motor: 22/26 kWspindle turning speed range: 6000 U/minrapid traverse: 15 m/mintable-size: 5000 x 2400 mmworkpiece weight: 18 tControl: FANUC 31i-MB total power requirement: - kWweight of the machine ca.: 45 tdimensions of the machine ca.: 12,6 x 6,5 x 4,15 m- CNC Control FANUC 31i-MB- Tool Changer 32-fold (BT 50)- 3 axes linear scales- Semi-auto universal head (C axis auto 5 degree indexing)- Extension head- Spindle oil cooler- Air conditioner for electrical cabinet- Hydraulic oil cooler- no coolant thru spindleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 200 mmz-travel: 400 mmtable surface area: 700 x 300 mmtool taper: SK 40 - S20 feed: 8 - 400 mm/ minrapid traverse: in X und Z 1200 mm / minturning speeds: 40 - 2000 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 1400 kgdimensions of the machine ca.: 1500 x 1200 x 1600 mmIncludes 2-axis digital display HeidenhainThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 6.800 mmy-axis: 4.000 mmz-axis: 1.500 mmControl: iTNC 530 HSCI Heidenhaindistance between columns: max. 5.090 mmdistance spindle center to table: 1.825 mmMain spindle:: type: 175149A-0007 turning speed range - main spindle: max. 19.800 min/-1power capacity - main spindel: 20 kWmax. Torque: - Nmtool taper: HSK-A63 swivellable: B: +115° / -115 °rotatable: C: +/- 200 °Main spindle:: type: 178099-0005 turning speed range - main spindle: max. 10.020 min/-1power capacity - main spindel: 20 kWmax. Torque: - Nmtool taper: HSK-A100 swivellable: B: +115° / -115 °rotatable: C: +/- 200 °work table:: table surface area: 6.000 x 3.000 mmmax. table load: 50,0 theight over floor: 100 mmnumber of T-slots: 12 T-slot - width: 28H12 mmT-slot - distance: 250 mmTool-Presetter:: number of toolpositions: 62 (38+24) pos.number of toolpositions: HSK A63: 37+1 pos.number of toolpositions: HSK A1 ...

x-travel: 560 mmy-travel: 300 mmz-travel: 420 mmtable-size: 1055 x 240 mmspindle taper ISO: Sk 40 spindle turning speed range: 40 - 1550 U/minquill stroke: mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,3 tdimensions: 1,6 x 1,5 x 1,85 mUniversal milling machine- Digital display- Chip guard- Coolant system- Machine light- Chip trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 620 mmgear width: 90 mmmax. module: 12 min. module: - no. of teeth: 6 - 100 pivoting angle: 0 - 90 Gradspindle taper: metr. 100 milling head speed: 28 - 56 U/minconnected load: 18 kVAControl: total power requirement: 14 kWweight of the machine ca.: 12 t2020 Retrofit with new control/electrical system)- CNC control NTC (Fanuc) (German/English)- electric handwheel- new motors/ electrics- various change wheels- chip conveyor- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 525 mmz-travel: 500 mmtable surface area: 1000 x 543 mmspindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/minfeed X/Y/Z-axis: 20 - 10.000 mm/minrapid traverse X/Y/Z axis: 18 / 18 / 15 m/mintable load: max. 350 kgcontrol: HEIDENHAIN MillPlus milling-head swivable +/-: 90 °total power requirement: 26 kVAweight of the machine ca.: 4,2 tdimensions of machine L x W x H: 2,95 x 2,1 x 2,26 mAccessories: various tool fixtures, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 820/850 mmy-travel: 300/330 mmz-travel: 485/505 mmweight of the machine ca.: 1,8 tdimensions of the machine ca.: 1670 x 1620 x 2500 mFurther techniscal detals please consider picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 400 mmz-travel: 320 mmtable-size: 900 x 420 mmcontrol: konventionell tool adaptor: SK40 turning speed range: 35,5 - 1800 U/minquill stroke: ja mmtotal power requirement: 5,0 kWweight of the machine ca.: 1,45 tdimensions: 1,6 x 1,2 x 1,9 mFeatures:- Digital display- Coolant system- Milling head with quillThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 400 mmz-travel: 300 mmrapid traverse: 1,2 m/minfeed range: 5 - 500 mm/mincreep feed: 1:100 tool taper: ISO 40 stroke: v60 h70 mmtable - universal: ca. 620 x 320 mmtable vertical adjustable: 350 mmweight of the machine ca.: 1200 kgdimensions: mmMachine was used in a public facility and is in good condition.Machine can be viewed under power by prior appointmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1900x1250x1750 mmweight: 600 kgtotal power requirement: 6,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1250x1750 mmtotal power requirement: 6,5 kwweight: 700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x1100x1500 mmWeight: 300 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 940x1250x1400 mmWeight: 250 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2500x2100x1800 mmWeight: 1700 kgTotal power requirement: 7,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 980x860x1380 mmWeight: 165 kgTotal power requirement: 0,75 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2500x2100x1800 mmWeight: 1700 kgTotal power requirement: 7,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x2000x1950 mmWeight: 700 kgTotal power requirement: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2700x900x1900 mmWeight: 800 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.